• Applied Biological Chemistry
• /
• v.50 no.4
• /
• pp.245-252
• /
• 2007

FTA (fault tree analysis), an analytical method for system failure management, was employed in the management of faults in running PCR analysis. PCR is executed through several processes, in which the process of PCR machine operation was selected for the analysis by FTA. The reason for choosing the simplest process in the PCR analysis was to adopt it as a first trial to test a feasibility of the FTA approach. First, fault events-top event, intermediate event, basic events-were identified by survey on expert knowledge of PCR. Then those events were correlated deductively to build a fault tree in hierarchical structure. The fault tree was evaluated qualitatively and quantitatively, yielding minimal cut sets, structural importance, common cause vulnerability, simulation of probability of occurrence of top event, cut set importance, item importance and sensitivity. The top event was 'errors in the step of PCR machine operation in running PCR analysis'. The major intermediate events were 'failures in instrument' and 'errors in actions in experiment'. The basic events were four events, one event and one event based on human errors, instrument failure and energy source failure, respectively. Those events were combined with Boolean logic gates-AND or OR, constructing a fault tree. In the qualitative evaluation of the tree, the basic events-'errors in preparing the reaction mixture', 'errors in setting temperature and time of PCR machine', 'failure of electrical power during running PCR machine', 'errors in selecting adequate PCR machine'-proved the most critical in the occurrence of the fault of the top event. In the quantitative evaluation, the list of the critical events were not the same as that from the qualitative evaluation. It was because the probability value of PCR machine failure, not on the list above though, increased with used time, and the probability of the events of electricity failure and defective of PCR machine were given zero due to rare likelihood of the events in general. It was concluded that this feasibility study is worth being a means to introduce the novel technique, FTA, to the management of faults in running PCR analysis.

• Nuclear Engineering and Technology
• /
• v.12 no.2
• /
• pp.81-87
• /
• 1980

Insulin was labelled with $^{125}$ I using lactoperoxidase as an oxidizing agent. The reaction product was purified via two stages: a starch gel electrophoresis(SGE) and a Sephadex gel filtration (SF). Upon comparison of the labelling yields and the bindabilities of the labelled insulin to its antibody, it has been found that the enzyme method shows higher yields (50%) and the better bindability to its antibody than the conventional chloramine-T method (35%). By checking the insulin blank labelling mixture with a SGE, a paper chromatography, and a radioautography technique, a by-product in the lactoperoxidase method has been identified. The separated fractions in SGE and SF were also analyzed and discussed.

• Journal of the Korean Chemical Society
• /
• v.45 no.2
• /
• pp.149-155
• /
• 2001

A new analytical method of cyanobacterial toxins, i, e, microcysins was deveeloped using supercritical fluid extraction(SFE). The microcystins mcluded in the study are sparsely soluble in neat supercritical fluid CO$_2$ However, the microcystins were successfully extracted with a temary mixture(90% CO$_2$,9.0% methanol 1.0% water) at 40$^{\circ}$C and 250 atm. The SFE method developed in this study has several advantages over solid-phase extraction(SPE) sample preparation for the analysis of microcystins. Sample handling steps are minimized thus reducing possible losses of analytes and saving analysis time. No clean-up steps are employed in this SFE method. Althouhgh many methods have been described for microcystim RR and LR, the method using solid-phase extraction with ODS cartridges is the most commonly used. However, the adsorbing power of ODS caridges for microcystins is weak, so we have attempted to use a more polar CN cartridge, to increase the adsorbing power for microcystins. Lyophilized cells(100mg) were wxtracted with 5% (v/v) acetic acid. The extract was centrifuged and then the supernatant was applied to a CN cartridge. The cartridge which contained microcystins was rinsed with 5 ml of water and 5 ml of 0.5 M acetic acid. followed by 5 ml of 5% acetonitrile in water , and were determined by HPLC. Better recoveries and chromatogram were observed than with ODS cartridge.

• Journal of the Korea Concrete Institute
• /
• v.26 no.3
• /
• pp.239-245
• /
• 2014

This study analyzed a comprehensive database including 6331 ready-mixed concrete plant mixtures to quantitatively assess the environmental impact of concrete under mixture proportions variable according to the domestic region and season. The environmental impact indicator includes global warming, photochemical oxidant creation, abiotic resource depletion, acidification, eutrophication and human toxicity, which are determined from categorization, characterization, normalization and weighting process based on Korea lifecycle inventories. The determined environmental impact indicator was also normalized by concrete compressive strength ($f_{ck}$), which is defined as impact index, to calculate the environmental impact per unit strength of 1 MPa. The most common compressive strength of concrete used in the country is estimated to be 24 MPa and 27 MPa. For $f_{ct}$ of 24 MPa, the lowest environmental impact indicator is observed in Ulsan, whereas the highest region is Gwangju and Daegu. This difference according to domestic region is primarily resulted from by the replacement of different supplementary cementitious materials. Furthermore, the impact index of concrete with $f_{ck}$ of 24 MPa is higher by approximately 5% at wintertime than at summertime and standard season. The impact index gradually decreases with the increase of $f_{ck}$ up to 35 MPa, beyond which it remains constant.

• Composites Research
• /
• v.25 no.2
• /
• pp.54-61
• /
• 2012

In this study, a specific structural design procedure for 2 MW class glass/epoxy composite wind turbine system towers is newly proposed through load case study, trade-off study, optimal structural design and structural analysis. Optimal tower design is very important because its cost is about 20% of the wind turbine system's cost. In the structural design of the tower, three kinds of loads such as wind load, blades, nacelle and tower weight and blade aerodynamic drag load should be considered. Initial structural design is carried out using the netting rule and the rule of mixture. Then the structural safety and stability are confirmed using a commercial finite element code, MSC NASTRAN/PATRAN. The finally proposed tower configuration meets the tower design requirements.

• Analytical Science and Technology
• /
• v.9 no.4
• /
• pp.345-354
• /
• 1996

Algal(II) Multidentate N, O-Schiff base ligands, such as bis(salicylaldehyde) ethylenediimine(SED), bis(salicylaldehyde) propylenediimine(SPD), bis(salicylaldehyde) diethylenetriimine(SDT), bis (salicylaldehyde) triethylenetetraimine(STT) and bis(salicyl-aldehyde)tetraethylenepentaimine(STP) were prepared. Stepwise proton dissociation constants of the Schiff base were measured potentiometrically in ethanol and a mixture of 70% dioxane and 30% $H_2O$. The stability constants of copper(II)-Schiff base complexes were in the order of Cu(II)-SPD${\leq}$Cu(II)-SED~STT${\leq}$Cu(II)-STP. Oxidation-reduction process of the Cu(II)-Schiff base complexes was involved with one-electron reaction.

• Korean Journal of Plant Taxonomy
• /
• v.45 no.2
• /
• pp.145-157
• /
• 2015

The nucleotide sequences of nuclear ribosomal ITS regions and chloroplast rbcL, matK and psbA-trnH regions of 30 individuals of Dendrobium moniliforme from several localities in four countries and 28 related species of Dendrobium were compared to investigate the genetic differences among Korean, Japanese, Taiwanese and Chinese D. moniliforme, and to verify the homogeneity of D. moniliforme, which is used as a traditional medicine in East Asia. A phylogenetic analysis showed that Korean D. moniliforme and Japanese D. moniliforme form a monophyletic group, with no significant differences between their nucleotide sequences. This confirms that they are the same species. However, the Chinese and Taiwanese D. moniliforme were polyphyletic. Various species related to D. moniliforme were located between the Korean-Japanese D. moniliforme and the Chinese-Taiwanese D. moniliforme, and other related species were found between individuals of Chinese-Taiwanese D. moniliforme. D. moniliforme is described in Japan, providing evidence that the Korean-Japanese D. moniliforme is the original species. In addition, our data suggest that the Chinese-Taiwanese D. moniliforme complex is a mixture of a range of other species. Further studies are required to understand the taxonomic identity of this species. In the Korean-Japanese D. moniliforme, there were almost no genetic differences among the localities, whereas the genetic heterogeneity was high among individuals of the Chinese-Taiwanese D. moniliforme.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.2
• /
• pp.161-174
• /
• 2011

The purpose of this study was to evaluate the effect of ethanol addition on efficacy of two-step total-etch adhesive under over-wet condition by measurement of remaining volatile part (RVP), microtensile bond strength (${\mu}TBS$), and degree of conversion (DC). Two-step total-etch adhesive, Optibond Solo Plus (Kerr, Orange, USA), was used. Experimental groups were divided into 8 groups: Group 1 (only 10 ${\mu}l$ adhesive), Group 2 (mixture of 3 ${\mu}l$ distilled water and 10 ${\mu}l$ adhesive), From Group 3 to Group 8 (mixture of 3 ${\mu}l$ distilled water, 10 ${\mu}l$ adhesive, and ethanol added in 1 ${\mu}l$ increment from 1 ${\mu}l$ to 6 ${\mu}l$). The mixtures were placed on slide glass and evaporated for 10 s, 30 s, and 60 s by air-drying. The weight of RVP was measured by precision weight. Same procedures were performed for ${\mu}TBS$ test and measurement of DC. The condition of mixed solution was observed under light microscope. For RVP weight, the weights of experimental groups except for group 1 decreased with the increase of air-drying time (p<0.05). The DC increased with the increase of air-drying time in only group 5 and 6 (p<0.05). The ${\mu}TBS$ increased with the increase of air-drying time in group only 5, 6, and 7 (p<0.05). The phase separation was examined and water blisters were diminished with the increase of air-drying time in group 5, 6, 7, and 8. Within the limits of this study, ethanol additionally applied to adhesive decreased RVP and increased DC and ${\mu}TBS$ under over-wet condition. It was shown that the addition of ethanol to two-step total-etch adhesive under over-wet condition would remove water and increase the efficacy of adhesive.

• The Korean Journal of Pharmacology
• /
• v.24 no.1
• /
• pp.111-123
• /
• 1988

Neutrophil elastases were purified by a three step procedure consiting of one Sephadex G-75 and two HPLC elutions. The elastases cross-reacted with antibodies to human neutrophil elastase. Three bands with molecular weights between 26,000 and 29,700 were observed by gel electrophoresis. At each stage of purification the quantity of Zn increased, reaching molar ratio of 2:1 with elastase in the most purified samples. Calcium content. was seletively elevated during the earlier stages of purification but decreased to a ratio of 0.25 to 1 with elastase at the final step of purfication. Neutrophil elastase could be inhibited by EDTA, EGTA and 1,10-phenanthroline. EGTA inhbition was noncompetitive inhibition and reversible only if the time of preincubation was relatively short, indicating the instability of the apoenzyme. The concentration of chelator required to show significant inhibition of elastase was also dependent upon the stage of purity and the ionic strength of the reaction mixture. Inhibition by EGTA, followed by the removal of EGTA, could be reversed by Zn. In the presence of EGTA the enzyme could be returened to full activity by the addition of Zn, Mn and Ca, but not Mg or Na. All of the above evidence strongly supports human neturophil elastase could be a metalloenzyme as well as a serine protease.

• The Korean Journal of Petroleum Geology
• /
• v.7 no.1_2 s.8
• /
• pp.35-40
• /
• 1999

Chemical and isotopic compositions of hydrocarbon gases were analyBed to characterize the properties of the shallow gases distributed in the southeastern part of the Ulleung Basin, offshore Korea. Sediments from the core were also analyzed to determine the characteristics and relationship to shallow gases. Hydrocarbon gases in the sediments consisted of methane (697.9-6054.4 ppm), ethane, propane, butane and hexane. The total carbon content of the sediments ranges from 1.84fe to $5.11{\%}$ and the total organic carbon content ranges from $0.29{\%} \;to\; 2.65{\%}$. High C/N ratio (>10) indicates that input of terrestrial organic matter was prevalent at the time of deposition. The methane content and stable isotopic data indicate that hydrocarbon gases from the sediments are identified to be thermogenic gas and mixture of both biogenic and thermal gases. Based on the Rock-Eval and carbon isotopic data, the level of thermal maturity of organic matter in the sediments $(Tmax<425^{\circ}C)$ is lower than that of gas. It suggests that thermal gases in the sediments migrated from the deeper sediments than the penetrated depth.