• Journal of the Mineralogical Society of Korea
• /
• v.24 no.3
• /
• pp.205-216
• /
• 2011

Mineral compositions of 69 southeastern Yellow Sea surface sediments collected at the Korea Ocean Research and Development Institute (KORDI) cruise in 2010, were determined using the quantitative X-ray diffraction analysis. Southeastern Yellow Sea surface sediments are composed of major minerals (quartz 49.1%, plagioclase 13.0% and alkali feldspar 9.3%), clay minerals, calcite, and aragonite. Illite (9.4%) is the most abundant clay mineral, chlorite (4.6%) is the second, and kaolinite (0.8%) is few. Quartz and alkali feldspar contents are high in coarse-grained sediments, whereas amphibole and clay mineral contents are high in fine-grained sediments. Quartz, plagioclase, alkali feldspar, chlorite, and kaolinite contents are higher, and illite content is lower in mud zone 1 corresponding to south margin of Central Yellow Sea Mud than in mud zone 2, a part of Southeastern Yellow Sea Mud. Difference of mineral composition between two mud zone suggests that source of fine sediment may be different in two mud zone and Southeastern Yellow Sea Mud might be largely supplied from the Keum and Youngsan rivers in southern part of the west coast in the Korean Peninsula.

• Journal of the Mineralogical Society of Korea
• /
• v.32 no.1
• /
• pp.51-61
• /
• 2019

Clay minerals, a major component of mud volcano (MV) sediments, are expected to provide important information for characterizing mud volcano formation mechanisms, but clay minerals have rarely been studied. The purpose of this study is to investigate the characteristics of 420 MV and surrounding marine sediments. Clay minerals and grain size were analyzed for 8 box cores from 420 MV and Mackenzie Trough. The relative proportions of the four major clay minerals in the Mackenzie Trough are almost constant in the order of illite, chlorite, kaolinite, and smectite, regardless of the distance from the Mackenzie River. However, the grain size tends to become fining as they move away from the Mackenzie River. Comparing the clay mineral characteristics of river (Colville River, Kuparuk River, Sagavanirktok River, Canning River, Mackenzie River) sediments entering the Beaufort Sea in order to determine the origin of the Mackenzie Trough and 420 MV sediments, the sediments of the Mackenzie Trough are characterized mainly by the Mackenzie River with a low ratio of smectite/illite and a high ratio of kaolinite/chlorite. In 420 MV sediments, the contents of clay minerals decrease in the order of illite, kaolinite, chlorite, and smectite, and the grain size with depth is almost constant. The content of smectite and coarse sediments is about two times higher than the reference core. No river with higher kaolinite content than chlorite exists in the Beaufort Sea, and the ratio of smectite/illite to kaolinite/chlorite is different from the reference core such as the ratio of the Mackenzie River. Compared to the reference core, the high contents of coarse sediments and the constant grain size with depth might be attributed to the ejection by MV. The reference core is interpreted as originating from Mackenzie River, and sediment of 420 MV is interpreted as originating from eruption of MV.

• Economic and Environmental Geology
• /
• v.34 no.6
• /
• pp.583-593
• /
• 2001

Clay minerals are common component of fault gouge and have been used to determine the fault activity age using K-Ar dating technique. We carried out XRD and K-Ar analyses of the mica clay minerals from the fault gouge along the Ulsan Fault Zone, southeastern Korea to estimate the timing of the major fault activity. Mica clay minerals for four grain size fractions of 5-2 Um, 2-1 $\mu$m, 1-0.35$\mu$m, and 0.35-0.05 $\mu$m were separated from the gouge samples in the three locations by the hydraulic elutriation and contrifugal separator. Fault gouges are composed of smectite, mica clay minerals, kaolinite, chlorite, quartz, and feldspar. The illite crystallinity of mica clay minerals is the highest in the finest grained fraction with lM polytype, indicating that the aulhigenic mica clay minerals have been concentrated in the fraction. K-Ar ages give some variation from 46 to 35 Ma (330-2), 45 to 39 Ma (16Ww), and 32 to 15 Ma (102Ws) and are the youngest in the finest grained fraction. These results suggest that the hydrothermal alteration associated with the major fault activities along the Ulsan fault Zone took place twice at 39-35 Ma and 15 Ma.

• Journal of the Mineralogical Society of Korea
• /
• v.4 no.2
• /
• pp.90-98
• /
• 1991

This study introduces a new structural model of 1M 2:1 trioctahedral clay minerals or, more generally, 2:1 trioctahedral phyllosilicates. The structural model requires only the chemical formulae of the clay minerals as an input and uses the regression relation (Radoslovich, 1962) to calculate the a- and b-dimensions of the phyllosilicates with the given chemical formulae. The atomic coordinates of the constituent atoms are geometrically calculated for C2/m space group under the assumption that the interatomic distances are constant. To determine the c-dimension, this study calculates the binding energies of 1M 2:1 trioctahedral phyllosilicates as a function of d(001) and find the minimum energy producing d(001). The structural model generates the cell dimensions, interaxial angles, interatomic distances, octahedral, tetrahedral and interlayer thickness, polyhedron deformation angles and atomic coordinates in the unit cell. The simulated structural parameters of phlogopite and annite are very close to the reported data by Hazen and Burnham (1973), suggesting that the structure simulation using only the chemical formule is successful, and thus, that the structural model of this study overcomes the difficulties in the previous models by other investigators.

• Horticultural Science & Technology
• /
• v.30 no.4
• /
• pp.463-470
• /
• 2012

As the advanced seeding technology through use of plug tray for good cultivation of seeds was propagated along with the expansion and development of horticultural industry, the use of bed soils as growing medium has recently been increased. In this study, the effects of the four clay minerals such as illite, phyllite, zeolite, and bentonite on the early growth of red pepper in the bed soil were investigated. Furthermore, proteome analysis for the leaf and stem samples of red pepper treated with only illite was performed. Of the seedling cultured, the healthy and regular size seeds were selected and cultivated in the pots, after they were treated with four clay minerals. The experiment was performed during the whole six weeks in the glasshouse of the Chungbuk National University. The growth lengths, fresh and dry weights of red pepper were significantly higher in the treatments of illite, phyllite, zeolite, and bentonite than in the control. In addition, the uptake of $K^+$, $Ca^{2+}$, and $Mg^{2+}$ were higher in the treatment of illite, phyllite, zeolite, and bentonite than in the control. The 2-DE patterns for the red pepper by the applications of illite, phyllite, zeolite, and bentonite were similar to each other. Therefore, compared to the samples of control, the proteome analysis for the samples of red pepper treated by only illite were performed. Proteome analysis for red pepper showed that plastid fructose-1, 6-bisphosphate aldolase class 1, aldolase, and glyceraldehydes 3-phosphate dehydrogenase, all of which were involved in the energy metabolism, were highly expressed in leaf tissue by illite treatment. In stem tissue, NAD-dependent formate dehydrogenase involved in energy metabolism, potassium transport protein, and GIA/RGA-like gibberellins response modulator were highly expressed. Based on the results obtained from the proteome analysis, it appears that the proteins specifically and differentially expressed on the illite treatment may be involved in the enhanced growth of red pepper. The identification of some proteins involved in the response of vegetable crops to the treatment of clay mineral can provide new insights that can lead to a better elucidation and understanding of mechanism on their molecular basis.

• Journal of the Korea Institute of Building Construction
• /
• v.6 no.1 s.19
• /
• pp.109-115
• /
• 2006

Although the clays were one of the major materials of building constructions, presently, its functions are lesser and the cements take its place as building materials. however, the IAQ problems such as $CO_2$ increase, Rn gas and VOCs occurrence should be imperative from production and construction processes of the cements. This study aims to develop the alternate clay compounds to cements and analyze its properties by experimental tests. For the study, the claymineral of Chungchong-bukdo 10 areas are used. The chemical and structural properties are experimentally analyzed and the pozzolan reaction possibilities of clays are executed.

• 한국해양학회지
• /
• v.26 no.4
• /
• pp.313-323
• /
• 1991

Fine-grained sediments of the Han River and adjacent Kyonggi Bay have been studied using the powder x-ray diffractometer in order to study the distributional characteristics of clay minerals in the bottom and suspended sediments. The result of the XRD analyse shows that the major clay minerals in the lower Han River are composed of illite (57.1%), kaolinite (22.9%), and chlorite (19.6%) and that those of the Han River Estuary are composed of illite (67.2%), chlorite (16.5%), kaolinite 915.5%), and smectite (1.3%). The variation of mineral content shows distinct distributional characteristics depending on sedimentary environments. The illite content increases gradually approaching the Kyonggi Bay and kaolinite content decreases toward the sea within the range between 11% and 23%. The trend of chlorite is similar to that of kaolinite, the amount of which ranges between 14% and 19%. Smectite content is lower than 3%. Analysis of illite using peak-intensity ratio (001/002) indicates that two types of illites occur in the study area. Dioctahedral-type illite occurs as an indicator of the marine sediments. The illites distributed between the Kyonggi Bay and the Han River are mixtures of dioctahedral- and trioctahedral-types. This study indicates that the distribution of illite, kaolimite, and chlorite has been influenced mainly by the supply from the Han River and redistributed by estuarine circulation, such as tidal circulation and seasonal variation of river discharge. However, smectite is apparently supplied from other sources such as Yellow Sea or China. This study suggests that estuarine mixing system and seasonal variations of river discharge are the major factors controlling the distribution pattern of clay minerals in the study area.

• Korean Journal of Food Science and Technology
• /
• v.37 no.1
• /
• pp.23-29
• /
• 2005

To investigate potential characteristics of clay minerals (illite, kaolin, zeolite, vermiculite, and bentonite) for food industry application, antioxidative properties of clay minerals, electron-donating ability (EDA), peroxide value (POV), and thiobabituric acid (TBA) were measured, and antimicrobial activity against several food spoilage microorganisms were evaluated by minimum inhibition concentration (MIC) method. Changes in components by cooking clay minerals added to stored rice were measured by GC-MS. DPPH (1,1-diphenyl-2-picrylhydrazyl) analysis results revealed bentonite has strongest EDA at 20.6%. Antioxidant activities measured based on POV were similar to DPPH results. Induction period of linoleic acid with vermiculite was longest among. TBA results revealed zeolite hasstrongest antioxidant ability. Growth inhibition against E. coli and S. aureuswas observed in illite, vermiculite, and zeolite. Aroma components indicated decrease in hex anal, pent anal, non anal, linoleate, stearic acid, and oleic acid when clay minerals were added to stored rice. These results indicate that several clay minerals have antioxidative and antimicrobial abilities and improve flavor profiles in stored rice.

• Journal of the Mineralogical Society of Korea
• /
• v.25 no.3
• /
• pp.163-173
• /
• 2012

In this study, we determined the relative clay mineral composition of 51 surface sediments from SEYSM (Southeastern Yellow Sea Mud) (northern part 25, southern part 26) and 30 river sediments inflow to Yellow Sea using the semi-quantitative X-ray diffraction analyses. In addition to we analyzed illite characteristics of the same samples. The clay-mineral assemblage is composed of illite (61~75%), chlorite (14~24%), kaolinite (9~14%), and smectite (1~7%), in decreasing order. The average composition of each clay mineral is not different from northern part to southern part of SEYSM except a little higher kaolinite and lower smectite content in northern part. Smectite content generally has reverse relationship with illite content. Mineralogical characteristics of illite such as illite crystallinity index also is not different between two areas and show very narrow range (0.18~0.24 ${\Delta}^{\circ}2{\theta}$). Our results reveal that clay mineral composition and illite characteristics are nearly the same between northern and southern part of SEYSM. Characteristics of surface sediments in SEYSM is closer to Korean river sediments than Chinese Hanghe sediments, however it is necessary to investigate further study including Yangtze river sediments. This study conclude that most of surface sediments in SEYSM attribute to the supply of considerable amount of sediments from the nearby Korean rivers. The large sediment budget and high accumulation rate in the SEYSM can be explained by erosion and reworking of surface sediments in this area. Tidal and regional current system around SEYSM might contribute these erosional and depositional regimes.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.7
• /
• pp.704-712
• /
• 2006

This research was designed to investigate the removal of heavy metals, such as $Al^{3+}$, $Cu^{2+}$, $Mn^{2+}$, $Pb^{2+}$ and $Zn^{2+}$, by adsorption on clay minerals. Bentonite(Raw-Bentonite), $Ca^{2+}$ and $Na^+$ ion exchanged bentonite(Ca- and Na-Bentonite) and montmorillonite, such as KSF and K10 from Sigma Aldrich, were used as adsorbents. The component of five inorganic adsorbents was analyzed by XRF, and the concentration of metal ions was measured by ICP. The cation exchange capacity(CEC) and the particle charge of adsorbents were measured. The initial concentration range of metal ions was $10{\sim}100$ mg/L. From the experimental results, it was shown that the adsorption equilibrium was attained after $1{\sim}2$ hours. The maximum percentage removal of $Al^{3+}$, $Cu^{2+}$, $Pb^{2+}$ and $Zn^{2+}$ on Na-Bentonite were more than 98% and that of $Mn^{2+}$ was 66%. $Al^{3+}$ was leached out from KSF with the higher concentration of hydrogen ion. Percentage removals of $Pb^{2+}$ and $Zn^{2+}$ on KSF were 88% and 59%, respectively. In general, the percentage removal of metal ions was decreased with the higher initial concentration of metal ions. The adsorption capacity of metal ions on Na-Bentonite was $1.3{\sim}19$ mg/g. Freundlich equation was used to fit the acquired experimental data. As the results, the adsorption capacity of metal ions was in the order of Na-Bentonite$\gg$Raw-Bentonite$\cong$K10>Ca-Bentonite>KSF. Freundlich constant, K of Na-Bentonite was the largest for metal ions. The order K of Na-Bentonite was Al>Cu>Pb>Zn>Mn, and the adsorption intensity(1/n) was determined to be $0.2{\sim}0.39$.