• Applied Biological Chemistry
• /
• v.42 no.3
• /
• pp.188-192
• /
• 1999

In order to minimize the mycelial pellet formation, one of the critical obstacles during the fermentation processes of filamentous fungi, an investigation was focused on the culture conditions(media and initial inoculum) and additives(soils, surfactants and polyethylene glycol 200) when a high phosphate-dissolving fungus, Penicillium sp. GL-101, was cultured in liquid media. Culturing the strain in PDB, SDB and YPD media, their pellet sizes decreased to the order of YPD > SDB > PDB. And at the high concentrations of the initial inoculum in the range from $1{\times}10^3\;to\;1{\times}10^6$ conidia/ml, the small sizes of pellet were formed in the PDB media. For the initial inoculum between $1{\times}10^7\;and\;1{\times}10^8$ conidia/ml, however, an amorphous pellet or loose aggregate was formed. The addition of soils, zeolite and diatomite, up to 1.0% decreased the pellet sizes to 3/4 and 1/2, respectively, but the pellet was increased to 2.5 times by the addition of bentonite. Surfactants also affected on the size of pellet; the addition of Triton X-100 and Tween 80 up to 1.0% decreased the pellet sizes maximally to 1/10 and 1/4, respectively, while SDS completely inhibited the fungal growth. Among the four additives tsted, polyethylene glycol 200 was the most effectively reduced the pellet sizes to $0.2{\pm}0.1$mm that resulted in about 25- fold reduction compared to the control.

• Economic and Environmental Geology
• /
• v.46 no.2
• /
• pp.153-163
• /
• 2013

The Ogcheon Au-Ag deposit consists of two quartz veins that fill the NE or NW-trending fissures in the metasedimentary rocks of unknown age. The quartz veins occur mainly in the massive type with partially breccia and cavity. They can be found along the strike for about minimum 50 m and varied in thickness from 0.1 to 0.3 m. The mineralogy of quartz veins from the Ogcheon deposit is mainly composed of hydrothermal alteration minerals such as pyrite, quartz, sericite, chlorite, clay minerals and sulfides including pyrite, pyrrhotite, arsenopyrite, sphalerite, chalcopyrite and galena. Fluid inclusion data from quartz indicate that homogenization temperatures and salinity of mineralization range from 184 to $362^{\circ}C$ and from 0.0 to 6.6 wt.% eq. NaCl, respectively. These suggest that ore forming fluids were progressively cooled and diluted from mixing with meteoric water. Sulfur(${\delta}^{34}S$: 0.4~8.4‰) isotope composition indicates that ore sulfur was derived from mainly magmatic source although there is a partial derivation from the host rocks. The calculated oxygen(${\delta}^{18}O$: 4.9~12.1‰) and hydrogen(${\delta}D$: -92~-74‰) isotope compositions suggest that magmatic and meteoric ore fluids were equally important for the formation of the Ogcheon deposit and then overlapped to some degree with another type of meteoric water during mineralization.

• Economic and Environmental Geology
• /
• v.26 no.1
• /
• pp.11-20
• /
• 1993

In the present study, three representative hydrothermal clay deposits, named the Seongsan, Ogmaesan and Haenam deposits, were selected for oxygen and hydrogen isotope studies. Oxygen and hydrogen isotopic compositions of quartz, sericite, alunite and kaolin minerals from Seongsan, Ogmaesan, Haenam deposits and surrounded rocks of clay deposits have been measured. The ${\delta}^{18}O$ values of quartz, kaolin, sericite and alunite in the Seongsan mine are +8.4 to +11.1‰, +3.6 to 5.4‰, +4.8 to +5.8‰ and + 3.0 to +6.6‰, respectively. In the Ogmaesan mine, the ${\delta}^{18}O$ values of quartz, kaolin, sericite and alunite are +8.0 to +13.6‰, +2.8 to +6.7‰, +4.8 to +8.4‰ and +0.9 to +2.4‰, respectively. The ${\delta}^{18}O$ values of the Haenam mine range from +7.9 to +10.1‰ for quartz and from +4.5 to +6.5‰ for sericite. The ${\delta}^{18}O$ values of the whole-rocks range from + 3.0 to + 7.8‰ for the granitic rocks. The ${\delta}^{18}O$ values of the whole-rocks range from + 3.2 to + 10.7‰ for the volcanic rocks. The 8D values of kaolin, sericite and alunite in the Seongsan mine are -78 to -86‰, -71 to -90‰ and -43 to -77‰, respectively. In the Ogmaesan mine, the ${\delta}D$ values of kaolin, sericite and alunite are -73 to -80‰, -74 to -88‰ and -57 to -98‰, respectively. The ${\delta}D$ values of the Haenam mine range from -76 to -85‰ for sericite. The ${\delta}D$ values of the whole-rocks range from -77 to -105‰ for the granitic rocks. The ${\delta}D$ values of the wholerocks range from -76 to -100‰ for the volcanic rocks. The main result obtained oxygen and hydrogen isotope data can lead to the following interpretations on the origin of hydrothermal fluids in the clay deposits: Through the oxygen isotopic study, the formation temperature of the clay deposits was estimated from the coexisting minerals such as quartz-kaolin minerals and -sericite. Formation temperature of the acidic alteration zone is 165 to $280^{\circ}C$ in the Seongsan deposits, 175 to $250^{\circ}C$ in the Ogmaesan deposits and 250 to $350^{\circ}C$ in the Haenam deposits. Three clay deposits has been formed by magmatic water mixed with meteoric water. Furthermore, from this isotopic data, it is clarified that kaolin minerals and alunite are hypogene in origin, and has been formed by oxidation of hydrogen sulfide in the steam-heated environment, and that alunite has been produced in the spectacular solfataric alteration observed at the surface of some present-day hydrothermal systems. Oxidation of the $H_2S$ is thought to be generated when the vapor phase generated by boiling of the deep-seated water under the water table.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.10
• /
• pp.1058-1064
• /
• 2005

This research was designed to investigate the removal of anionic species, such as $F^-$, $Cl^-$ and ${NO_3}^-$, by adsorption on the clay minerals. Bentonite, $Ca^{2+}$ or $Na^+$ ion exchanged bentonite and montmorillonite, such as KSF and K10 from Sigma Aldrich, were used as the adsorbent. The component of five inorganic adsorbent was analyzed by XRF and XRD and the concentration of anion was measured by ion chromatography. From the experimental results, it was shown that the adsorption equilibrium was attained after 8-24 hours. For the amount of 6 g of each adsorbent, the adsorption capacities of $F^-$ and ${NO_3}^-$ on KSF was the largest as $825\;{\mu}g/g$ and $707\;{\mu}g/g$ respectively and that of $F^-$ on $Ca^{2+}$ ion exchanged bentonite was $255\;{\mu}g/g$ and that of ${NO_3}^-$ on K10 was $103\;{\mu}g/g$. In general, the efficiency of removal for the anionic species was increased with increasing of the amount of the adsorbent. Especially, for the amount of 6 g of KSF, the efficiency of removal for $F^-$ and ${NO_3}^-$ was 99% and 95% respectively. But, for all adsorbents, the efficiency of removal for $Cl^-$ was less than 9%. Also, a Freundlich equation was used to fit the acquired experimental data. As the result, for the $F^-$ and ${NO_3}^-$ on KSF, Freundlich constants, K, was respectively 1.09 and $0.45\;[mg/g][L/mg]^{1/n}$ and the adsorption intensity(1/n) was determined to be 0.08 and 0.27 respectively.

• Geotechnical Engineering
• /
• v.12 no.2
• /
• pp.33-42
• /
• 1996

The weathering of mudrock in the Pohang area is mainly caused by slaking and swelling when the mudrock is absorbed with water. In this regard, this paper chows the results of chemical analysis and the identification of rock-forming minerals from XRD. It also compares the slaking and swelling characteristics of mudrocks sampled from 3 different sites. The chief rock -forming minerals are the quartz, and the several types of clay minerals. The slake durability indices are ranged from 71% to 96%, and these values are closely related to the liquid limit of the powdered nock specimen. In a similar manner to the slaking characteristics the greatest values of the swelling pressure and the swelling strain were measured from the mudrock specimen with the highest value of liquid limit. The greatest measured values of the swelling pressure and the swelling strain are 9.4 kg 1 cm2 and 33.5% respectively. The residual sheer strength of mudrock decreases as the number of wet -diy cycles increases, and the residual strength at 5 cycles are measured to c,=0.24kg/cm2 and p,=28$^{\circ}$. The lowest residual strength is measured at the fresh rock -rock contact surface in the moist condition of which values are cr: 0 and n,: 21.5$^{\circ}$.

• Economic and Environmental Geology
• /
• v.53 no.6
• /
• pp.645-654
• /
• 2020

We present the K-Ar age dating results of <0.1㎛ fraction of the selected fault rocks from the Yangsan fault in the Yeonghae area. Based on the mineralogical characterization, the <0.1㎛ fractions were mostly composed of 1Md illite polytype, or I-S interstratified mineral, which should be formed by fault activation. Therefore, we determined the timings of fault activation events by analyzing K-Ar age-dating for the <0.1㎛ fractions. Accordingly, the activation timings of Yangsan Fault in the Yeonghae area were determined as 45.5±1.1 Ma, 50.9±1.2 Ma, 58.2±1.3 Ma, 60.8±1.4 Ma, 65.3±1.6 Ma, 66.8±1.5 Ma, 67.1±1.5 Ma, and 75.1±1.7 Ma. These results indicate that at least 5-times of major fault events occurred in the Yangsan fault from late Mesozoic to Cenozoic Era. In the outcrop, age dating results tend to be younger age from the location of the oldest sample(75.1±1.7 Ma) toward to the both sides. From the results, it suggests that the fault activation extends from the location of oldest age saple to both sides. This geochronological research of the multiple fault activation ages for the Yangsan Fault will provide crucial information for establishing the tectonic evolution model in the southeastern part of the Korean Peninsula.

• Korean Journal of Soil Science and Fertilizer
• /
• v.25 no.3
• /
• pp.191-194
• /
• 1992

The tomb of the king Muryung, the 25th king of ancient Baegje dynasity in Korea, was proved to be constructed about 1500 years ago. The Physico-chemical characteristics were determined in order to investigate the pedogenic process for tomb soils. Clay and silt content inclosed down to 30~40cm soil depth. The increase of clay was 13.4% in the 10cm surface soil and the estimated time for 1% increase of clay in the profile was about 112 years. There were great changes in chemical properties in the 10cm surface soil, and considerable accumiration of salts and increase of catiom exchange capacity(CEC) down to 30cm depth. The alteration of primary minerals and formation of clay minerals were great in the 10cm surface soil and considerably reconized down to 50~60cm. The result suggested that the development of soil profile from the tomb parent material for the period was 10cm under the forest environment in Korea. The parent material of tomb soil was considered to be transported greyish green clored diorite from other place.

• Korean Journal of Soil Science and Fertilizer
• /
• v.7 no.4
• /
• pp.197-200
• /
• 1974

PCP adsorption experiment was carried out with six soils various in clay mineral and organic matter content and soil pH. The results were as follows; 1. The major factor governing the PCP adsorption is pH 2. The adsorption was increased with organic matter content at a certain pH 3. The adsorption was less related to crystalline clay mineral species.

• Journal of the Mineralogical Society of Korea
• /
• v.32 no.4
• /
• pp.235-247
• /
• 2019

The Central South Sea Mud (CSSM), developed in the Seomjin River estuary, is known to be supplied with sediments from Heuksan Mud Belt (HMB) and Seomjin River. However, in order to form a mud belt, more sediments must be supplied than supplied in the above areas. Therefore, research on additional sources should be conducted. In this study, clay minerals, major elements analyzes were performed on cores 16PCT-GC01 and 16PCT-GC03 in order to investigate the transition in the provenance and transport pathway of sediments in CSSM. The Huanghe sediments are characterized by higher smectite and the Changjiang sediments are characterized by higher illite. Korean river sediments contain more kaolinite and chlorite than those of chinese rivers. Korean river sediments have higher Al, Fe, K concentraion than Chinese river sediments and Chinese rivers have higher Ca, Mg, Na than those of Korean rivers. Therefore, clay minerals and major elements can be a useful indicator for provenance. Based on our results, CSSM can be divided into three sediment units. Unit 3, which corresponds to the lowstand stage, is interpreted that sediments from Huanghe were supplied to the study area by coastal or tidal currents. Unit 2, which corresponds to the transgressive stage, is interpreted to have a weaker Huanghe effect and a stronger Changjiang and Korean rivers effect. Unit 1, which corresponds to the highstand stage when the sea level is the same as present and current circulation system is formed, is interpreted that sediments from Changjiang and Korean rivers are supplied to the research area through the current.

• Journal of the Mineralogical Society of Korea
• /
• v.31 no.2
• /
• pp.113-121
• /
• 2018

Baekasan Acheon cave located in Hwasun-gun, Jeollanam-do is a natural limestone cave only found in this province. In this study, the mineralogical and geochemical characteristics of speleothems collected from Baekasan Acheon cave were identified and the capability of carbonate mineral formation by aerobic microorganisms enriched from the cave and the mineralogical and geochemical characteristics of carbonate minerals formed by the microorganisms were investigated. The samples of sediments (clay) and speleothems (shelfstone and cave coral) were collected at three sites in the cave. The samples of shelfstone and cave coral were identified mainly as carbonate mineral, Mg-rich calcite, and clay minerals were composed of quartz, muscovite, and vermiculite by X-ray diffraction (XRD) analysis. To cultivate the carbonate forming microorganisms, parts of the sediment and speleothems were placed in D-1 medium containing urea, respectively, and the growth of microorganisms was observed under the aerobic condition at room temperature. The capability of carbonate mineralization of the cultured Baekasan Acheon cave microorganisms was examined through adding 1% (v/v) of the cultured microorganisms and calcium sources, Ca-acetate or Ca-lactate, into the D-1 medium. XRD analysis showed that the microorganisms cultured in cave deposits formed calcium carbonate ($CaCO_3$) under all conditions, and these microbial carbonate minerals included calcite and vaterite. The morphological characteristics and chemical composition of biologically formed minerals were observed by SEM-EDS showed various crystal forms such as rhomboid, spherical, perforated surface with Ca, C, and O of major chemical components. The existence of such microorganisms in the cave can contribute the formation of carbonate minerals, and it is likely to affect the geochemical cycles of carbon and calcium in the cave.