• 제목/요약/키워드: 1st-order system

검색결과 419건 처리시간 0.024초

갈대사상여과법(砂床濾過法)을 이용한 축산폐수정화(畜産廢水淨化);I. 처리일수(處理日數) 및 계절별(季節別) 변화(變化) (Purification of Animal Wastewater Using a Reed-Sand-Filter System;I. Retention Period and Seasonal Variation)

  • 이덕배;김종구;강종국;김선관;소재돈;이경수
    • 한국환경농학회지
    • /
    • 제13권2호
    • /
    • pp.231-239
    • /
    • 1994
  • 축산폐수의 경제적 정화기술을 개발하고자 사상여과조(砂床濾過漕)(모래층 20cm+자갈층 30cm)에 갈대를 재배한 뒤 혐기발효된 양돈폐수의 투입 1, 3, 5, 7일 후 정화 효과를 계절별로 분석한 결과는 다음과 같다. 1. 축산폐수 처리일수가 길수록 갈대에 의한 질소 및 인산의 흡수 이용량이 많아지고 근부에서 발생된 산소로 BOD, COD도 낮아져서 정화 효과가 향상되었다. 2. 갈대의 건물생산량은 7일 처리가 가장 높았고 양분흡수량도 처리기간이 경과할수록 중가하는 경향이었다. 3. 갈대사상여과조는 사상여과조 보다도 오염 물질제거율이 높아 여름의 경우 T - N : 30%, $PO_4^{-3}$: 37%, COD : 42%, 부유물은 30% 더 높은 정화율을 나타내었다. 4. 계절별 축산폐수정화율은 여름철이 가장 높고 가을, 봄 순이었다.

  • PDF

한방병원 침구과로 협진의뢰된 한양방 협진 환자 1,549명에 대한 후향적 분석 (An Retrospective Analysis of 1549 patients under the Cooperative Medical Care consulted to the Department of Acupuncture and Moxibustion in a Korean medical hospital)

  • 조희진;권민수;김정환;조대현;최지은;한지선;이승훈;김용석;남상수
    • Journal of Acupuncture Research
    • /
    • 제33권4호
    • /
    • pp.109-119
    • /
    • 2016
  • Objectives : The aim of this study is to give a statistical basis for the characteristics of patients who received cooperative medical care after being referred from Western medical departments to the Department of Acupuncture and Moxibustion in a Korean medical hospital. Methods : The request records were searched for cooperative medical treatment at the Department of Acupuncture and Moxibustion in a Korean medical hospital between September 1st, 2011 and August 31, 2016, based on the Order Communication system(OCS). The records were reviewed and retrospectively analyzed according to the patient's general characteristics, the chief diagnosis code based on the 7th Korean standard classification of diseases(KCD-7) before and after the cooperative medical care in the Department of Acupuncture and Moxibustion, and the actual treatment measures which patients received as a result of the cooperative medical care. Results : Among the 2702 records, 1549 patients were included in the analysis. The male to female ratio was 1 : 1.17. Sexagenarians formed the highest age group and the number of patients whose age was over 50 was 1176(75.92 %). The surgery department requested the cooperative care from the department of Acupuncture and Moxibustion for the highest number of patients, 1194(77.08 %). When analysing specific medical departments, Neurosurgery, General Surgery, Neurology, Otorhinolaryngology, and Physical medicine and rehabilitation followed. The frequency of chief diagnosis code used before the cooperative medical care was in the order of I, C, G, S, and M code, from highest to lowest. The order of the codes after the cooperative medical care was the same. Acupuncture treatment was the most frequently-used measure after the cooperative medical care. Following were infrared, moxibustion, transfer, herbal acupuncture, cupping, electroacupuncture, and so on. Conclusion : This study provides a statistical basis for the demands placed on the Department of Acupunture and Moxibustion for cooperative medical care with the Western medical department. Based on the present condition of cooperative medical care, more preparation and effort is required for its activation.

국내·외 응급구조사의 보수교육프로그램 비교조사 (Comparison of Continuing Education Program for Emergency Medical Technician in Korea and Abroad)

  • 신동민;장문순;강보라;윤병길;탁양주;이인수
    • 한국응급구조학회지
    • /
    • 제14권3호
    • /
    • pp.95-105
    • /
    • 2010
  • Purpose: This study aims to investigate the operation of continuing education system and continuing education program for emergency medical technician in Korea, Japan and United States and develop reasonable operating scheme of continuing education and curriculum in order to provide the base data for the improvement of continuing education for the improved practice capability and its maintenance, Method: The overall review of continuing education for domestic 1st class emergency medical technician was performed and also the content of continuing education for Emergency Medical Technician - Paramedic in the United States and Paramedics of Fire Department with the license for the paramedic in Japan, have been analyzed through literature, books, articles, agencies' data, laws, and internet date. Result: Hours for domestic continuing education was 4-8 hours and it was only 3-11% compared to 72 hours in the United States and 128 hours in the Japan. And with respect to the types and methods of programs, there were differences both in quantity and quality. Conclusion: As an education, providing and supplementing the changed content and technical information for the improvement of the capability and qualification of emergency medical technician, selection of education hours and various continuing education should be continuously and regularly provided and conducted. The introduction of various continuing education system and programs for this is considered to be required.

  • PDF

진공용 공기베어링의 성능해석 (Performance Analysis of a Vacuum-Compatible Air Bearing)

  • 김경호;박천홍;이후상;김승우
    • 한국정밀공학회지
    • /
    • 제23권10호
    • /
    • pp.103-112
    • /
    • 2006
  • This paper describes a theoretical analysis and experimental verification on the performances of a vacuum-compatible air bearing, which is designed with a cascaded exhaust scheme to minimize the air leakage in a vacuum environment. The design of the vacuum-compatible air bearing equipped with the differential exhaust system requires great care because several design parameters, such as the number of exhaust stages, diameter of exhaust tube, pumping speed of a vacuum pump, and bearing clearance greatly influence the air leakage and thus degree of vacuum. In this study, a performance analysis method was proposed to estimate the performances of the air bearing, such as load capacity, stiffness, and air leakage. Results indicate that the load capacity and stiffness of the air bearing was improved as its boundary pressure, which was determined by the $1^{st}$ exhaust method, was lowered, and the dominant factors on the chamber's degree of vacuum were the number of exhaust stages, exhaust tube diameter and bearing clearance. A vacuum chamber and air bearing stage using porous pad were fabricated to verify the theoretical analysis. The results demonstrate that chamber pressure up to an order of $10^{-3}$ Pa was achieved with the air bearing stage operating inside the chamber, and this analysis method was valid by comparing predicted values with experimental data, for the mass flow rates from the porous pad, and pressures at each exhaust port and chamber, respectively.

정량화 시뮬레이션 모델을 활용한 단계적인 건축물에너지효율등급 향상 방안 (Stepwise Technique for Improving Building Energy Efficiency Rating Utilizing Quantified Simulation Model)

  • 김기석;김유민;김종성;오세규
    • KIEAE Journal
    • /
    • 제14권6호
    • /
    • pp.65-73
    • /
    • 2014
  • Due to the Climate change and resource shortage by global warming, various problems are rising and getting worse around the world. Many countries are doing the considerable efforts to reduce greenhouse gas emissions. The government of South Korea also plans to decrease greenhouse gas emission, the various pilot projects are underway, which includes obligation of energy efficiency 1st rating and greenhouse gas target management system of public buildings. In particular, luxurious government office buildings and energy-wasting public building have issued and emerged as a social problem. Energy efficiency improvement of the existing public office buildings are becoming an important issue recently. This study is proposed the step-by-step energy improvement model according to the building energy efficiency rate in order to reduce the energy consumption. To attain this end, I set up a base model by analyzing the current architectural conditions of the existing public office buildings and grasped the specific properties of building energy consumption through energy simulations. Furthermore, I suggested phased reduction prototypes for the reduction target of energy consumption by applying the methods of the zero energy building plan. This study is expecting that prototypes would give directions when it comes to planning the implementation policy of phased building plan factors, according the building energy consumption reduction goal in the existing public office buildings which are the subject of building energy target management system.

제501오룡호 전복사고의 역학적 요인 분석 (Analysis the dynamic factors on the capsize of O-Ryong 501)

  • 김용직;강일권;함상준;박치완
    • 수산해양기술연구
    • /
    • 제51권4호
    • /
    • pp.520-526
    • /
    • 2015
  • A tragic disaster happened by capsizing O-Ryong 501 trawler at Western Bering Sea in 1st, Dec. 2014. The disaster was caused by the severe weather and the long deferred escape from the storm in fully developed high sea. Lots of sea water from poop deck rushed into the fish ponder with fishes all together after hauling net and then remove the fishes from codend. The vessel became to incline to the one side caused by the weight and the free surface effect of flood sea waters and fishes at initial stage. In spite of crews all effort to discharge the waters, but the work was not achieved successfully. For the worse thing, the order of abandon ship was issued too late. After all, the ship capsized and sank, then almost crews became to the victims of the casualty including captain. In this paper, author carried out restrictively the calculation of dynamic factors influenced on the disaster including the weather condition and effects of the flood sea waters, and found out that the most important causes of the disaster were the decrease of stabilities, GM was decreased from 0.9m to 0.08 m, and the high waves which led to the vessel disaster.

다공패널형 공명기의 흡음성능에 관한 연구 (A Study on the Absorption Performance of a Perforated Panel type of Resonator)

  • 송화영;양윤상;이동훈
    • 설비공학논문집
    • /
    • 제28권6호
    • /
    • pp.224-231
    • /
    • 2016
  • When aiming to reduce the low frequency noise of a subway guest room through sound absorbing treatment methods inside the wall of a tunnel the resonator is often more effective than a porous sound absorbing material. Therefore, the perforated panel type resonator embedded with a perforated panel is proposed. The perforated panel is installed in the neck, which is then extended into the resonator cavity so that it can ensure useful volume. The absorption performance of the perforated panel type of resonator is obtained by acoustic analysis and experiment. The analytical results are in good agreement with the experimental results. In the case of multiple perforated panel type resonators, as the number of perforated panels increase, the 1st resonance frequency is moved to a low frequency band and sound absorption bandwidth is extended on the whole. In order to obtain excellent absorption performance, the impedance matching between multi-panels should be considered. When the perforated panel in the resonator is combined with a porous material, the absorption performance is highly enhanced in the anti-resonance and high frequency range. In case of the resonator inserted with perforated panels of 2, the 2nd resonance frequency is shifted to a low frequency band in proportion to the distance between perforated panels.

왕벚나무 성목 녹지삽목에서 삽목시기, 옥신처리 및 삽수부위가 발근에 미치는 영향과 이식 삽목묘의 생육특성 (Effects of Cutting Time, Auxin Treatment, and Cutting Position on Rooting of the Green-wood Cuttings and Growth Characteristics of Transplanted Cuttings in the Adult Prunus yedoensis)

  • 김장수;김진수
    • 원예과학기술지
    • /
    • 제30권2호
    • /
    • pp.129-136
    • /
    • 2012
  • 왕벚나무 성목(43-58년생)의 삽목묘 대량증식 방법을 밝히기 위해 삽목시기별, 옥신처리별 및 삽수부위별로 자동안개관수장치가 설치된 무가온 비닐하우스에 삽목을 실시했으며, 삽목묘의 가로수 식재 성공여부를 검토하기 위해 발근된 삽목묘를 묘포장에 이식하여 생육특성을 조사하였다. 각 처리에 따른 평균 발근율의 분산분석 결과는 고도의 유의성($P$ < 0.0001)이 나타났다. 시기별 평균 발근율에서 6월 1일의 삽목(61.4%)이 8월 1일(23.6%)보다 2배 이상 높아 6월 1일이 적합한 시기로 나타났다. 발근율이 가장 좋은 옥신 처리는 IBA $1,000mg{\cdot}L^{-1}$와 IBA $500mg{\cdot}L^{-1}$ 처리에서 각각 90.8%, 89.2%로 나타났으며, 발근율에 대한 각 처리간의 상호효과($P$ < 0.0001)가 인정되었다. 삽수부위에서 상단부 + IBA $1,000mg{\cdot}L^{-1}$ 처리가 발근율 96.7%로 가장 높게 나타났다. 삽목묘의 묘포장 이식 활착률 역시 옥신처리간에 고도의 유의성($P$ < 0.0001)이 인정되었으며, 잎이 있는 삽목묘의 평균 이식활착률은 46.5%로 낮았으나 IBA $1,000mg{\cdot}L^{-1}$ 처리는 79.2%로 높았다. 그러나 잎이 없는 삽목묘의 이식활착율은 8.7%로 대부분 고사하였다. 활착된 삽목묘와 접목묘 및 실생묘의 생장특성을 비교한 결과, 생장(수고, 근원경), 뿌리수, 가지수, 잎수 등에서 고도의 유의성($P$ < 0.0001)이 나타났으며 삽목묘가 월등히 우수하였다. 본 연구의 결과는 자동안개관수장치로 안정적인 습도조절과 온도유지가 가능한 삽목실에서 6 - 7월의 삽목실시, 상단부 삽수의 선택, IBA처리 및 8월에 발근된 삽목묘의 묘포장 이식을 통해 개량된 왕벚나무의 대량증식과 성공적인 가로수 식재가 가능할 것이다.

임상전문간호사 제도에 관한 의사와 간호사의 인식 (The Perception of Medical Doctors and Nurses on the Clinical Nurse Specialist System)

  • 이순옥;이원철
    • 간호행정학회지
    • /
    • 제1권2호
    • /
    • pp.372-387
    • /
    • 1995
  • One-hundred eighty four medical doctors and 349 nurses out of 6 university hospitals and 1 general hospital were surveyed from Mar. 3, to Mar. 31, 1995, in order to appreciate the extent of their understandings on the clinical nurse specialist system. The difference was analyzed by the subjects' age, their position and department, the expected benefits of the system. the assigned department, the position and qualification, the required special educational organization and program, and the extent of autonomy of the function of clinical nurse specialists and the special nursing field. The results were as follows ; 1. The perception about the expected benefits of the introduction of clinical nurse specialist system was significantly different among the age groups of medical doctors, and the age group of 40s among them showed the most positive perception. 2. The extent of acquaintance with clinical nurse specialist was the higher in the older age groups of respondent nurses. Meanwhile, the experience of participation with clinical nurse specialists was the more in the older age group of medical doctors. 3. The opinion about the required position of clinical nurse specialists was significantly different by the age and position of the respondent nurses. The rank of head nurse was suggested by the respondent nurses of older age and higher positon, while the level of in-charge nurse was suggested by the staff nurses. Also, the duration of clinical experience required of clinical nurse specialists was the most frequently responded as 6 to 10 years by nurses, as 2 to 5 years by medical doctors. 4. The degree of educational background required of clinical nurse specialists was differently responded by the various position of medical doctors and nurses. Of the medical doctors, professors frequently responded bachelor degree and medical residents frequently responded master degree as the required educational background. Of the nurses, nursing administrators more frequently responded that master degree was required of clinical nurse specialists than staff nurses and clinical nurse specialists did. 5. The extent of acquaintance with clinical nurse specialist system was different among the various department of medical doctors, which was the highest in the doctors of psychiatry, internal medicine and pediatrics, respectively. The doctors of surgery were the least acquainted of clinical nurse specialist. 6. The nurses of special parts, of surgery and of obstetrics & pediatrics responded more frequently that clinical nurse specialists should belong to the nursing department than the nurses of internal medicine and of others did. 7. The Special parts that necessitate clinical nurse specialists were responded to be the more important by nurses than by medical doctors. Clinical nurse specialists were responded to be the more necessary in the parts of diabetics, oncology, pyschiatry, dialysis, organ transplantation, intensive care, and in cardiovascular part. They were responded to be the less important in the parts of intravenous therapy, computer informatics, nursing administration, the improvement of nursing quality.

  • PDF

LQ 제어로 조단블록이 있는 중근을 실근으로 이동시키는 가중행렬 결정 방법 (Methods of Weighting Matrices Determination of Moving Double Poles with Jordan Block to Real Poles By LQ Control)

  • 박민호
    • 한국산학기술학회논문지
    • /
    • 제21권6호
    • /
    • pp.634-639
    • /
    • 2020
  • 일반적으로 비선형 시스템은 1차와 2차 시스템의 곱으로 선형화할 수 있기 때문에 시스템은 2차 시스템의 중근, 복소근, 서로 다른 두 실근과 1차 시스템의 근을 극점으로 가진다. 이런 극점의 위치 변경으로 시스템의 안정성과 응답특성을 개선할 수 있어서 다양한 방법으로 극점을 이동시키는 제어기를 설계한다. 여러 방법 중에서 LQ 제어는 이득여유와 위상여유의 안정성을 보장한다. 그런데 시행착오 방법으로 가중행렬을 선택하여 원하는 응답특성을 얻기 때문에 극점의 위치를 임의로 지정하기 어렵다. 이 논문은 조단블록을 가진 다중 중근을 원하는 실근으로 이동시키는 LQ 제어의 가중행렬을 선택하는 방법에 관한 것이다. 대각행렬 형태의 제어가중행렬과 ρd와 ϕd의 2개 변수 상태가중행렬을 갖는 해밀토니안 시스템의 특성방정식에서 중근과 가중행렬의 관계식을 유도한다. 그리고 상태가중행렬이 양의 준정부호 행렬이 될 조건에서 실근으로 이동할 중근의 이동범위를 구하고, 좌표평면에 표현한다. 이 범위에서 극점을 선택하고, 관계식으로 가중행렬을 계산하는 방법을 제안한다. 그리고 예제를 통해 조단블록을 갖는 4개의 중근을 원하는 서로 다른 실근으로 이동시키는 가중행렬과 제어법칙의 계산과정을 통해 제안한 방법의 유용성을 확인하였다.