• 항공우주기술
• /
• 제6권1호
• /
• pp.173-181
• /
• 2007

단위 장비 수준에서 시스템 수준에 이르기까지 통제되는 KSLV-I 2단부의 복사성 방사/감응 특성은 탑재되는 위성, 발사체 1단부, 그리고 우주센터에 설치되고 운용되는 지상장비 및 외부 통신망의 정상동작을 보장하기 위하여 전 주파수 대역에 대해 시험 및 관리되어야 한다. KSLV-I과 하부시스템에서 방사되는 비의도성 잡음은 각각의 요구규격에 정의된 제한치 보다 작도록 제한되어야 할 뿐만 아니라 시스템의 특성을 정확히 검증하기 위한 적절한 시험 및 평가 방법도 개발되어야 한다. 본 논문에서는 KSLV-I 2단부 엔지니어링 모델의 전자파적합성 확보를 위해 도출된 복사성 방사와 복사성 감응에 대한 시험규격, 측정방법 그리고 시험 결과가 제시된다.

• 상하수도학회지
• /
• 제32권5호
• /
• pp.411-419
• /
• 2018

The residual chlorine concentration is an essential factor to secure reliable water quality in the water distribution systems. The chlorine concentration decays along the pipeline system and the main processes of the reaction can be divided into the bulk decay and the wall decay mechanisms. Using EPANET 2.0, it is possible to predict the chlorine decay through bulk decay and wall decay based on the pipeline geometry and the hydraulic analysis of the water distribution system. In this study, we tried to verify the predictability of EPANET 2.0 using data collected from experimental practices. We performed chlorine concentration measurement according to various Reynolds numbers in a pilot-scale water distribution system. The chlorine concentration was predicted using both bulk decay model and wall decay model. As a result of the comparison between experimental data and simulated data, the performance of the limited $1^{st}$-order model was found to the best in the bulk decay model. The wall decay model simulated the initial decay well, but the overall chlorine decay cannot be properly predicted. Simulation also indicated that as the Reynolds number increased, the impact of the wall.

• 동력기계공학회지
• /
• 제5권1호
• /
• pp.64-72
• /
• 2001

According to the regulation of IMO, oil discharge from ships is allowed under 15ppm only and an oil filtering equipment is essential. However, for large ships using heavy fuel oil of over S.G 0.98 and viscosity 380cSt and system oil, it has been in difficulty to process with existing filtering type of oily water separator. A parallel plate type oily water separator which is one of gravity type separators can be used as an assistant equipment for the oil filtering system to meet the present IMO standard of 15 ppm, because it is an efficient method in dealing with a large amount of rich oil with high specific gravity. This work is focused on the fundamental investigation of the performance of the plate type oily water separator by visualization method and PIV(Particle Image Velocimetry) measurement to acquire multi-point velocity data simultaneously. The experimental results showed that the space of the plates acts a significant role in separating process and it was found that an important point to minimize a vortex flow is to flow a large amount of fluid in space of the plates in order to promote the efficiency of separation.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.659-666
• /
• 2009

As the density and height of the buildings nearby subway lines get higher, the unprecedented residents' appeals for noise are on the rise. Furthermore, in accordance with the revision of enforcement regulations on the Noise and Vibration Control Act, the night time noise standards have been reinforced by 5dB effective on January 1st 2010 and the appropriate measures shall be taken accordingly. For the settlement of the public grievances against noise and vibration generated on tracks in at-grade and elevated section, the installation of continuously-welded-rail, rail lubrication system, improved fastening system and higher noise barrier is currently executed. Nevertheless, the noise and vibration levels in some areas are still exceeding the limits required in the regulation. Among the measures, an installation of higher noise barrier or noise tunnel seems to be the most effective way; however, it has limitations owing to the structural stability of existing elevated structures. The paper in consideration of the local conditions and foreign practices discusses the installation of fairing system under the train body as an noise insulation panel in order to reduce the rolling noise and under-carriage noise. Based on the result of this study, a performance verification test during actual train operation is in progress for further study.

• 전자공학회논문지S
• /
• 제35S권5호
• /
• pp.1-10
• /
• 1998

Satellite communication is getting more important in the coming 21st century because of its wide areas sevice capability, ease of access, and fast channel establishment. As such, satellite communication networks will be the basis of the global communication system in cooperation with the ground ATM networks. In this paper, we consider an efficient transmission methodology of ATM cells over the satellite communication channel. We first analyze possible bottlenecks and performance deterioration factors in the case, and then propose an enhanced cell trasmission mechanism. In order to use satellite channel for ATM cell transmission, the application of complicated channel coding is inevitable. However, the forwared error control such as convolutional encoding brings forth burst errors, which calls for the application of some kind of interleaving mechanism to randomize the burst errors at the receiver. Another aspect which should b econsidered in satellite communication system is the inherent transmission delay, which can be very considered in satellite communication system is te inherent transmission delay, which can be very critical to the delay-sensitive ATM traffic. Therefore, we propose that the processing delay at the block interleaving stage should be controlled propose a variable-size block interleaving mechanism which utilizes the predicted transmission delay for each traffic in the queues of the transmitter. According to the computer simulation, the proposed mechanism could improve the overall performance by drastically reducing the ATM cell drop rate owing to the excessive transmission delay.

• 공업화학
• /
• 제10권6호
• /
• pp.885-888
• /
• 1999

본 연구에서는 $Na_2B_4O_7{\cdot}10H_2O/Na_2B_4O_7{\cdot}5H_2O$ 반응계의 열분해 탈수반응에 의한 반응속도상수를 결정하고 반응계의 재현성 및 화학축열재의 반복사용에 따른 내구성을 검토하였다. 반응계의 열분해 탈수반응의 차수는 1차이었고, 열분해 탈수 반응속도는 수증기의 분압차에 정비례하였다. 반응계의 반응속도상수는 약 0.27이었고, 반응속도상수와 반응차수에 대한 반응의 재현성이 우수하였다. 또한 화학축열재의 내구성은 연속적으로 반복 사용하여도 활성변화는 ${\pm}5%$ 범위 내에 있었다.

• 한국작물학회지
• /
• 제59권3호
• /
• pp.307-311
• /
• 2014

본 연구는 건강 기능성 농산물로 각광을 받고 있으면서 수요와 재배면적이 점차 확대되고 있는 수수의 생산량 증대와 자급률 향상을 위한 체계적인 재배기술을 확립하기 위한 기초자료를 얻고자 고휴점파 본수에 따른 생육 및 수량에 관한 연구를 수행하였다. 1. 파종본수에 따른 초장에서 파종본수가 증가할수록 길어지는 경향이 뚜렷이 나타났으며 엽수에서는 파종본수가 가장 적은 1본 처리구에서 8.0개로 많았으며 엽수가 가장 적게 나타난 5본 처리구와 연차간 각각 1.4, 1.5개의 차이가 나타났다. 경태에서도 파종본수가 증가할수록 얇아지는 경향이 나타났으며 1본 처리구 대비 72.6, 74.3%의 차이가 나타났다. 2. 수확기의 간장은 1, 2년차 모두 파종본수가 증가할수록 길어지는 뚜렷한 경향이 나타났으며 가장 길게 나타난 5본 처리구 183, 188 cm와 가장 짧게 나타난 1본 처리구간 각각 41, 29 cm 차이가 나타났다. 간경에서는 1본 처리구에서 가장 굵은 19.18, 20.13 mm로 나타났으며 파종본수가 증가할수록 얇아지는 경향으로 나타났다. 3. 수량구성요소를 보면 이삭장 및 이삭당 종실수, 천립중 모두 연차간 파종본수가 적을수록 길고 많거나 무거운 것으로 나타났으며 수량에서는 연차간 파종본수가 2본 처리구에서 수량구성요소에서 높은 값을 보인 1본 처리구 보다 111%, 116% 높은 것으로 나타났다.

• 한국산학기술학회논문지
• /
• 제17권5호
• /
• pp.709-716
• /
• 2016

최근 급속한 플랜트 설비의 발전과 더불어 각종 기계 구조물들의 운전조건이 가혹해지고 사용시간이 길어짐에 따라 신뢰성에 대한 문제가 제기되고 있다. 특히, SNG 설비에 사용되는 재료는 설계조건에 따라 1.25Cr-0.5Mo 또는 2.25Cr-1Mo강과 같은 내열강들이 주로 사용된다. 본 연구에서는 Lab-scale용 합성천연가스 반응기를 제작하여 생산공정 반응기 재질인 1.25Cr-0.5Mo강을 이용하여 실제 SNG 공정중 1차반응기와 동일한 운전 조건에서 부식 특성에 대하여 실험적 연구를 진행하였다. 1.25Cr-0.5Mo강을 운전 시간에 따라 각각 배출조성 조건과 주입조성 조건에 노출시켜 부식에 대한 실험을 수행하였으며 실험 결과 내구성에 가장 영향을 미치는 요소는 수소로 인한 수소취성과 산화 부식임을 알 수 있었으며, 배출조성보다 주입조성에서 더 빠른 부식이 발생함을 확인하였다. 그러나 배출조성 조건에서는 산화부식과 더불어 수소취성에 의한 부식이 동시에 발생하여 장시간 운전 후 부식정도가 갑자기 증가하고 부식강도가 급격히 강해지는 것을 나타났다. 또한 주입조성에서는 산화물들이 시편에 흡착되어 두꺼운 산화층을 형성시켰으며 이로 인하여 재료의 내산화성이 크게 저하되는 것으로 확인되었다.

• 한국환경복원기술학회지
• /
• 제16권1호
• /
• pp.171-180
• /
• 2013

As the second-largest 1st degree of ecological zone in Kangwon Province, Pyeongchang County is expected to play an important role in expanding the protected areas of the Republic of Korea. However, Pyoungchang County is expected to experience an increase in demand for development due to the 2018 Winter Olympics. Problems related to various stakeholders and limited budget will arise regarding the issue of expanding the protected areas. In this study, in order to effectively control these problems, we designed expansion plans for the 1st degree ecological zoning map areas and the observed data of threatened species I and II in Pyoungchang County by using the MARXAN Software. As for the methods, we first set the planning units(PUs) for the spatial analysis. The PUs include boundary length, land cost, land status, etc. Then, we made the input data by controlling the conservation features, BLM(Boundary Length Modifier) and iteration numbers. There are two measures for the establishment of the protected areas, one of which only concerns with the ecological priority, and the other with combining the land cost on forest. The one illustrated shows that the larger patches that include the conservation feature was selected as a candidate of the protected areas. The other one presented shows that inexpensive land cost areas were selected. As this study produces visual results and enables an efficient application of various values in selecting protected areas, we believe that it will be useful to various stakeholders in spatial decision-making process.

• 대한치과보철학회지
• /
• 제28권1호
• /
• pp.95-122
• /
• 1990

This study was done to analyze the occlusal curve as one of the factors to be considered for maintenance of occlusal stability in the orthodontic and prosthodontic treatments. Sixty gnathological casts we.e obtained from 43 subjects with normal occlusion and 17 subjects with some of temporomandibular disorders. The occlusal surfaces of gnathologic casts were duplicated by using a Color kit SK-700 and tile reference points of X, Y coordinates were digitized by using the Summagraphic digitizer and 18AT computer system. The Z coordinates of cusp height were measured by 0.01mm measurable caliper. The mathematical computer program of least square method was used to analyze the occlusal curve arranged by three dimensional coordinates of X, Y, Z. The following results were obtained : 1. The occlusal curve of buccal and lingual cusp tips was fitted to the ellipse, and the occlusal curve of anterior teeth was fitted to a part of the circle in the analysis of conic sections. 2. The radius of Spee's curve showed individual differences, but was average 98.7mm in male subjects and 93.7mm in female subjects. 3. The radius fo Spee's curve according to the half of canine width showed the least coefficient of variation. 4. The radius of Spee's curve was not significantly relative to the lateral occlusal contacts on laterotrusion and the absence or presence of temporomandibular disorders. 5. The radius of Wilson's curve showed individual difference and the size of radius was followed by the order of 1st premolar, 2nd premolar, 2nd molar and 1st molar.