• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.529-535
• /
• 2018

The range extender vehicle runs on a mechanism that allows the small power generation engine to start in the most efficient specific operating range to charge the battery and extend the mileage. In this study, we developed a step motor type intake air supply system that replaces existing throttle body system to develop a simple low cost control logic system. The system was applied to the existing base engine, and in order to improve the performance by increasing the amount of intake air, the effect of changing the length of the intake and exhaust manifold was experimentally examined. As a result, the Type B intake air control actuator operated by one step motor showed higher performance than the Type A in all the operation region, but the performance was lower than that of the base engine due to the increase of flow resistance. To improve this, it was confirmed that the engine performance was improved at both speeds of 2200rpm and 4300rpm when the 140mm adapter was installed in the intake manifold and when the newly designed 70mm exhaust manifold was applied. Through this process, high - precision operation control was realized by connecting the generator load to the optimized engine for the range extender electric vehicle. Experimental results showed that the speed change rate was within ${\pm}2.5%$ at 2200rpm in 1st stage and 4300rpm in 2nd stage and the speed follow-up result of 610 rpm/s was obtained when the speed was increased from 2200rpm to 4300rpm.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.12 no.4
• /
• pp.246-252
• /
• 1992

In order to reduce the problems from overlapping between rye harvest and maize seeding dates, and also to improve the growth, productivity and nutritive value of rye (Secale cereale L.), an experiment was carried out to determine the variety effect of rye on the forage production system, and seeding date effect on the yield and quality of rye. The experiment was conducted in the forage testing field of S.N.U., Suweon, from September 1988 to May 1989. The dry matter and in vitro digestible dry matter yields of rye harvested 14 April were 5.2 t and 4.6 t/ha with an early maturing rye variety, Winter more, but 3.1 t and 2.8 t/ha were obtained with a late maturing rye variety, Kodiak. When seeding date was delayed, a significant decrease in dry matter yield was observed. ADF and NDF contents, and IVDMD of an early maturing rye, Winter more, harvested 14 April were 25.6, 44.8 and 81.9 %, but those of a late maturing rye, Kodiak, were 21.1, 39.5 and 88.9 %, respectively. ADF and NDF contents of rye were increased as the seeding date was delayed, but ail forage ryes from different seeding dates as well as varieties were recorded as the 1st grade proposed by market hay grades. The dry matter and in vitro digestible dry matter yields of rye harvested at 80 %heading stage were significantly decreased as delayed seeding date, but no significant differences were found between early and late maturing varieties. No differences in ADF and NDF contents, and IVDMD of the rye harvested at 80% heading stage were found among the treatments, but all forage ryes were evaluated as the 4 th grade proposed by market hay grades.

• Korean Journal of Occupational Health Nursing
• /
• v.9 no.2
• /
• pp.86-93
• /
• 2000

This study was conducted to find out the degree of tiredness, accumulated tendencies of fatigues in accordance with 3 types of circadian rhythms and 3 types of perceived fatigue signs such as physical, psychological and neurosensory aspects in before and after work at night. Samples were chosen from the 217 intensive care units nurses working in 13 general hospitals which had 3 shift rotating systems, Data were collected from November to December in 1999. Two hundreds seventeen respondents were classified by 3 circadian types such as 59 morning, 110 middle and 48 evening. Circadian type was measured by the circadian type scale which was designed by ${\ddot{O}}stberg$ and Home (1976). in order to estimate the level of tiredness, the investigator used the fatigue checklist designed by the Labor and Health Institute of Japan(1970). Analysis was done by frequency a percentages, ${\chi}^2$ test and repeated measures ANOVA test. The result of this study were as follow: 1. In the general characteristics of the subjects circadian types, moderate type had the large proportion at 50.7% and morning type had 27.2% and evening type had 22.1%. 2. According to the 3 types of fatigue signs, the highest general tendency was 'General weakness' and 'Feeling of headsore' for physically perceived sign, 'Drowsiness' for psychological sign, and 'Uncomfortableness in sight seeing' for neurosensory sign. 3. The most frequently complained fatigue were observed in physical symptoms among physical, mental, and neurosensual symptoms. The percentage of complained was higher after night work than before the work started. 4. There was not any statistical significant difference between the circadian type and the degree of physical, mental, neurosensory fatigue. 5. There was not any statistical significant difference in regarding to each date of night shift except difference between 1st and 2nd days of fatigue perceived physically. Therefore, the study concluded that the fatigue perceived by night shift nurses might be related with shift working condition rather than circadian types.

• Current Industrial and Technological Trends in Aerospace
• /
• v.6 no.1
• /
• pp.105-115
• /
• 2008

The organization for satellite operation team is mainly based on the number of satellites to be controlled, operator's workload of payload operation support and the degree of automation of the operation system. Although the structure and its functionality of satellite operation organization are a little different according to the complexity of the operation, most satellite control centers have adapted the similar architecture for single or multiple satellite support. KARI Satellite Operation Center(KSOC) has started its simple mission operations since the launch of KOMPSAT-1(21st Dec. 1999) and has been evolving into multiple mission operations for various satellites such as KOMPSAT-2, KOMPSAT-3, KOMPSAT-5 and COMS(Communication Ocean Meteorological Satellite). This paper presents the appropriate direction of future deployment for KSOC by comparing the current status with the recommendation of the advanced satellite operation organization and analyzing their experiences in order to propose the better solution for efficient and safe satellite operations.

• Journal of Korean Society of Rural Planning
• /
• v.11 no.1 s.26
• /
• pp.1-8
• /
• 2005

The purpose of this study is to develop a simulation model of rural road path for infrastructure of green-tourism and public service in rural areas. This study makes an objective function for moving cost minimization considering car travel time according to road characteristics, which can route the optimal shortest road paths between the center places and all rear villages, based on GIS coverages of road-village network for connecting between center places and rural villages as input data of the model. In order to verify the model algorithm, a homogeneous hexagonal network, assuming distribution of villages with same population density and equal distance between neighborhood villages on a level plane area, was tested to simulate the optimal paths between the selected center nodes and the other rear nodes, so that the test showed reasonable shortest paths and road intensity defined in this study. The model was also applied to the actual rural area, Ucheon-myun, which is located on Hoengsung-gun, Kangwon-do, with 72 rural villages, a center village (Uhang, 1st center place) in the area, a county conte. (Hoengsung-eup, 2nd center place), and a city (Wonju, 3rd center place), as upper settlement system. The three kinds of conte. place, Uhang, Hoengsung-eup, and Wonju, were considered as center places of three scenarios to simulate the optimal shortest paths between the centers and rural villages, respectively. The simulation results on the road-village network with road information about pavement and width of road show that several spans having high intensity of road are more important that the others, while some road spans have low intensity of road.

• Computers and Concrete
• /
• v.24 no.3
• /
• pp.193-206
• /
• 2019

Although concrete is the most widely used construction material, its deficiency in shrinkage and low tensile resistance is undeniable. However, the aforementioned defects can be partially modified by addition of fibers. On the other hand, possibility of adding waste materials in concrete has provided a new ground for use of recycled concrete aggregates in the construction industry. In this study, a constant combination of recyclable coarse and fine concrete aggregates was used to replace the corresponding aggregates at 50% substitution percentage. Moreover, in order to investigate the effects of fibers on mechanical and durability properties of recycled aggregate concrete, the amounts of 0.5%, 1%, and 1.5% steel fibers (ST) and 0.05%, 0.1% and 0.15% polypropylene (PP) fibers by volumes were used individually and in hybrid forms. Compressive strength, tensile strength, flexural strength, ultrasonic pulse velocity (UPV), water absorption, toughness, elastic modulus and shrinkage of samples were investigated. The results of mechanical properties showed that PP fibers reduced the compressive strength while positive impact of steel fibers was evident both in single and hybrid forms. Tensile and flexural strength of samples were improved and the energy absorption of samples containing fibers increased substantially before and after crack presence. Growth in toughness especially in hybrid fiber-reinforced specimens retarded the propagation of cracks. Modulus of elasticity was decreased by the addition of PP fibers while the contrary trend was observed with the addition of steel fibers. PP fibers decreased the ultrasonic pulse velocity slightly and had undesirable effect on water absorption. However, steel fiber caused negligible decline in UPV and a small impact on water absorption. Steel fibers reduce the drying shrinkage by up to 35% when was applied solely. Using fibers also resulted in increasing the ductility of samples in failure. In addition, mechanical properties changes were also evaluated by statistical analysis of MATLAB software and smoothing spline interpolation on compressive, flexural, and indirect tensile strength. Using shell interpolation, the optimization process in areas without laboratory results led to determining optimal theoretical points in a two-parameter system including steel fibers and polypropylene.

• Restorative Dentistry and Endodontics
• /
• v.31 no.6
• /
• pp.460-469
• /
• 2006

This article complies a survey on the replacement of the posterior restorations and accesses possible factors that influence the replacement of posterior restorations. The data was collected from patients that visited department of conservative dentistry from Dec 1st 2003, to Sep 3rd 2004. Teeth was restricted to posterior permanent teeth. 9 dentists recorded age, gender of patients, tooth location, cavity farm and restorative material. They rated marginal adaptation, anatomic form, secondary caries of old restoration by modified Ryge criteria system. The statistical analysis was performed with Chi square test (p < 0.05) for replacement ratio according to patients, tooth factor and One way ANOVA was performed for comparison of old restoration according to restorative material. The results were as follows; 1. The female (62%) was statistically higher ratio than the male (38%). 2. The distribution of replacement case according to age, the rate of replacement was in descending order, 20's (38.3%), 40's (16.8%), 30's (15.9%), 10's (11.1%), 50's (9.2%), 60's (8.7%). 3. The rate of replacement was 88% for molar and 12% for premolar (p $gt; 0.05). 4. The rate of replacement was 39% for maxillar and 61% for mandible (p $gt; 0.05). 5. The material of restorations was amalgam (69%), gold inlay (17%), composite resin (13%). 6. In rating system by modified Ryge criteria system on margin adaptation, there was statistically significant difference between amalgam and gold inlay. But on anatomic form and caries, there was no statistically significant difference among the material of restorations.

• Korean Journal of Ecology and Environment
• /
• v.39 no.3 s.117
• /
• pp.340-351
• /
• 2006

To reveal physicochemical factors contributing to variation of phytoplankton communities, the study was carried out biweekly at 6 stations from Feb. 2004 to Feb. 2005 in the lower part of the Han River, Korea. As results, water temperature was changed from $0.3^{\circ}C$ to $26.6^{\circ}C$, pH: 6.6${\sim}$9.1, DO: 1.89${\sim}$22.23 mg $L^{-1}$, BOD: 0.38${\sim}$9.20 mg $L^{-1}$, COD: 1.4${\sim}$15.2 mg $L^{-1}$, Conductivity: $62.5{\sim}500.0\;{\mu}s\;cm^{-1}$, SS: 3.00${\sim}$159.3 mg $L^{-1}$, and Chl a $1.7{\sim}71.3\;{\mu}g\;L^{-1}$. Phytoplankton standing crops ranged from min. $3.6{\times}10^2\;cells\;mL^{-1}$ (July 2004, St. 3) to max. $2.3{\times}10^4\;cells\;mL^{-1}$ (Feb. 2005, St. 6), and mean of those varied from $5.9{\times}10^3\;cells\;mL^{-1}$in spring, $2.1{\times}10^3\;cells\;mL^{-1}$ in summer, $4.1{\times}10^3\;cells\;mL^{-1}$ in autumn and $8.5{\times}10^3\;cells\;mL^{-1}$ in winter, respectively. In order to investigate factors influencing the total phytoplankton standing crops a multiple regression analysis was adopted for the correlation between standing crops and environmental factors. The coefficient of determination ($R^2$) value of the regression was 0.465, it showed that environmental factors which predominantly influenced phytoplankton standing crops were water temperature, COD, $NO_2-N$, $PO_4-N$, Discharge and pH. six stations could be divided into 3 groups based on similarity index in terms of environmental factors. In ANOVA analysis for physicochemical and biological factors, water temperature, chlorophyll a, silicate, phytoplankton standing crops were the same group differed little from stations. However, Station 1and 2 were grouped followed in dissolved oxygen, conductivity, COD, nitrite, nitrate, ammonia and phosphate, and Station 3, 4 and 5 were followed in dissolved oxygen, conductivity, pH and phosphate.

• Journal of Korean Medicine Rehabilitation
• /
• v.30 no.2
• /
• pp.139-152
• /
• 2020

Objectives To explore the traffic injury patients' experience on health care utilization of Korean Medicine (KM) practice and perception of health care system for developing a Korean medicine clinical practice guideline (CPG) of traffic injuries by survey method. Methods Two hundred ten patients in suffering from traffic injuries were surveyed from September 1st, 2019 to January 31th, 2020 at 2 University Hospitals (Pusan National Korean Medicine Hospital and Kyung Hee Korean Medicine Hospital at Gangdong) and 1 Spine Specialty Hospital (Jaseng Hospital of Korean Medicine). A structured questionnaire of experience on health care utilization of KM practice and perception of health care system of was distributed to responders by visits and all data were statistically analysed. Results Survey results showed high satisfaction of patients with the experience of KM treatments in order of daoyin exercise (7.8±2.3), chuna manual therapy (7.7±4.0), pharmacoacupuncture (7.4±3.0) etc. Safety concerns were reported in 9.1% subjects and 205 (97.6%) patients answered that collaboration with KM and western medicine is necessary for patients with traffic injuries. For the patients' requirement for extending insurance coverage, the most required therapy was chuna manual therapy (57.5%) and pharmacoacupuncture (42.0%). Conclusions This study presented the realistic patient-centered perception of KM practice and health care system in Korea. These results will provide basic data to be reflected in the process of adaptation for the revision of Korean Medicine CPG for traffic injuries.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.4
• /
• pp.476-482
• /
• 2014

In this study, we analyzed the effect of corn growth on the radar backscattering coefficient. At first, we measured the backscattering coefficients of various corn fields using a polarimetric scatterometer system. The backscattering coefficients of the corn fields were also computed using the 1st-order VRT(Vector Radiative Transfer) model with field-measured input parameters. Then, we analyzed the experimental and numerical backscattering coefficients of corn fields. As a result, we found that the backscatter from an underlying soil layer is dominant for early growing stage. On the other hand, for vegetative stage with a higher LAI(Leaf-Area-Index), the backscatter from vegetation canopy becomes dominant, and its backscattering coefficients increase as incidence angle increases because of the effect of leaf angle distribution. It was also found that the estimated backscattering coefficients agree quite well with the field-measured radar backscattering coefficients with an RMSE(Root Mean Square Error) of 1.32 dB for VV-polarization and 0.99 dB for HH-polarization. Finally, we compared the backscattering characteristics of vegetation and soil layers with various LAI values.