• Korean Security Journal
• /
• no.2
• /
• pp.259-289
• /
• 1999

The Security Industry has dynamic working conditions. So this study intends to find the advisable direction for the reduction of accidents. To achieve the aim, the investigation of documents and the examinations of actual proofs have been done to figure the theoretical background and to see the basic knowledge of security industry. The questionnaire was composed of two question sheets to search real data and actual proofs, with making targets of pure security organization and personnel. The one consists of 9 questions to find the scale and extent of security organizations and the population and character of security personnel, and the other 25 questions in 3 major areas to analyze the causes, the frequency rates, the factors, and the condition of accidents. The period of survey was July 15th to October 15th in 1997 by mail/telephone/interview. The questionnaires were efficiently returned from 102 different organizations including the public security groups of Seoul Metropolitan Police Bureau and so on, with the information of 8,222 persons having worked for Korean Security Industry in 1996. So being based on the reality, some meaningful facts were found, and were compared with the national statistics of the Government. This study is made up of 5 chapters : in the 1st chapter the motivation, the object, the method, the direction and the limitation of the approach were presented ,in the 2nd chapter the theoretical background were inferred ; in the 3rd chapter the collected data of accidents in Korean Security Industry were analyzed and explained on the base of the questionnaires , in the 4th chapter the advisable facts connected with preventing accidents were mentioned ; in the last the conclusion were stated. With the replies of 102 different organizations including the information of 8,222 persons in 1996, the main facts found or analyzed through this study are as follows. Firstly, accident is an unpredictable and occasional event. It occurs to man and/or thing, but the frequency rate of accidents in Korean Government and other Institutes has been calculated and evaluated only in the point of the accident related with man. Secondly, the factors of accidents are firstly relevant to the way preventing accidents in Security Industry in Korea. However the frequency rate is academically calculated and evaluated by at once man(population) and hour(time). But the Government has done the rate only by man(population). This can be improper and inaccurate rates. Thirdly, the confused concept of security is used in Korean Government, academic society, corporation and so on. Therefore the detailed formation of the concept is needed for the development of Security Industry in Korea. Fourthly, security organizations can be classified into 'public security(public law enforcement)' and 'private security' according to its identification, and furthermore 'private security' can be divided into 'facilities-guard service', 'body-guard service', and 'patrol service' according to its major role. Fifthly, in the viewpoint of the number of both organization and population,'facilities-guard service' is centered in Korean 'private security'. According to the analyzed results of the questionnaires in this study, the frequency rate of accidents of Korean Security Industry is 0.43(%) totally in 1996 : 'facilities-guard service' 0.54(%), 'body-guard service' 0.12(%), and 'patrol service' 0.21(%) in 'private security', and 'public security' 0.20(%). With regard to the accident frequency rate of organization and population, 'facilities-guard service' is the highest. The accident frequency rate of population in 'facilities-guard service' organization ranges dispersively from 0.20(%) to 11.11(%). Sixthly, the accidented rate of workers having serviced for under one year is 57.6(%). This can mean that the main factor of accidents in Korean Security Industry is the lack of role-understanding and training/education. And another factor can be found on the time of accident occurrence. Many accidents have been occurred on the relaxed points like as just after lunch and morning rush-hour. Lastly, the major advisable facts related to preventing accidents are as follows : The workers who are over fifty years old in 'facilities-guard service' organization need to be educated for preventing accidents ; It is desirable that the training and education to prevent accidents should be practiced in the time of pre-service ; As the style of accidents and the age of the accidented are not same according to major service area('public security' and 'private security' : 'facilities-guard service', 'body-guard service', and 'patrol service'), the plans to prevent accidents must be different and various. However fracture and bruise are general accidents in Korean Security Industry ; Workers must care about traffic accident and violent fall ; It seems that the grouped working with other two persons will reduce accident occurrence possibility rather than individually single working.

• Journal of Preventive Medicine and Public Health
• /
• v.41 no.6
• /
• pp.407-412
• /
• 2008

Objectives: The purpose of this study was to evaluate the relationship of nonalcoholic fatty liver and cardiovascular risk factors. Methods: This study was conducted to investigate the association of nonalcoholic fatty liver and cardiovascular risk factors for adult men (n=2976) and women (n=2442) who were over 19 years old, after excluding the HBsAg(+) or anti-HCV(+) patients and the men and women with increased alcohol intake (men: 40g/week, women: 20g/week). Results: Compared with the normal liver subjects, the nonalcoholic fatty liver subjects showed a significantly increased frequency of abnormal systolic blood pressure (${geq}120mmHg$), fasting blood sugar (${\geq}100mg/dL$), total cholesterol ($({\geq}200 mg/dL$), triglyceride ($({\geq}150mg/dL$), high density lipoprotein cholesterol (<40 mg/dL), low density lipoprotein cholesterol ($({\geq}130g\; m/dL$) and abdominal obesity in men, and all these measures were significantly increased in the women except for abnormal HDL cholesterol. After adjusting for the body mass index, age, smoking, exercise and a nonalcoholic liver, the odds ratios of an abnormal waist hip ratio were 1.35(95% Confidence Interval=1.05-4.72) in the mild fatty liver, 1.61 (1.19-2.18) in the moderate fatty liver, 2.77(1.57-4.92) in the severe fatty liver compared with a normal liver. The adjusted odds ratios for abnormal fasting blood sugar were 1.26(1.03-1.53) in the mild fatty liver, 1.62(1.27-2.06) in the moderate fatty Iiver and 1.77(1.12-2.78) in the severe fatty liver. The adjusted odds ratios for abnormal triglyceride were 1.38(1.11-1.72) in the mild fatty liver, 1.73(0.33-2.24) in the moderate fatty liver and 1.91 (1.17-3.10) in the severe fatty liver of men. Adjusted odds ratios for abnormal triglyceride were 1.50(1.04-2.15) in mild, 1.71(1.07-2.68) in moderate, 1.81(0.69-4.38) in severe fatty liver of women. Conclusions: The nonalcoholic fatty liver subjects had more cardiovascular risk factors compared with the normal liver subjects. Thus, prevention and treatment of the nonalcoholic fatty liver is necessary by lifestyle modifications such as restriction of alcohol intake, no smoking, exercise and adequate eating habits.

• Korean Journal of Occupational Therapy
• /
• v.26 no.4
• /
• pp.1-11
• /
• 2018

Objective : This study was conducted to determine the emotional labor of occupational therapists and the level of their feelings of depression and to examine the impact of their emotional labor on their depressive mood. Methods : Subjects of this study were clinical occupational therapists working at hospitals and clinics in Seoul and Gyeonggi regions. The factors of emotional labor were set as independent variables, the general characteristic variable and job characteristic variable which showed significant results in the chi-square test was set as the adjusted variable and whether the depression happens or not was set as the dependent variable, after which a multivariate logistic regression analysis was conducted. Results : Components of emotional labor, including frequency of emotional display(OR 1.699, 95% CI 1.202-2.401), attentiveness to required display rules(OR 1.436, 95% CI 1.070-1.982), and emotional dissonance(OR 1.866, 95% CI 1.336-2.607) all had a significant effect on depression. The possibility of depression was significantly higher in women than men(OR 5.736, 95% CI 1.746-18.846), those working for more than 8 hours per day than less than 8 hours per day(OR 8.609, 95% CI 2.306-32.137), and those working with children than those working with adults(OR 4.249, 95% CI 1.668-10.824). Conclusion : This study revealed that the emotional labor that occupational therapists are exposed to while interacting with patients and their caregivers exerts an influence on their feelings of depression. This suggests the need for developing various preventive intervention programs designed to alleviate the depressive symptoms of occupational therapists and formulating appropriate policies.

• Journal of Chest Surgery
• /
• v.30 no.7
• /
• pp.713-718
• /
• 1997

Fracture of the sternum has been considered as a serious injury and also associated with major complications such as myocardial, major thoracic vascular, and spinal injury. Retrospective datas from blunt trauma victims admitted to our hospital were analyzed to determine significance of sternal fractures and possible associated injures. 101 sternal fractures by blunt trauma were admitted from january, 1986 to december, 1995. Frequency was about 3.51 olo of the nonpenetrating chest trauma. The ratio of male to female was 1.82 versus 1. Most common cause in the stemal fracture was high decelerating injury(73 cases). Most common fracture site was sternal body(75 cases). Average days of adm ssion were 26 days. Abnormal ECG findings were sinus bradycardia(Teases), complete or incomplete RBBB(6 cases), sinus tachycardia(4 cases), specific S-T change(3 cases), 1st degree A-V block(2 cases), LVH(1 case), PVC(1 case), and Low voltage(1 case). CPK-MB was increased about 32.Lolo of sternal fractures. Except of expired 2 patients, patients were treated with conservative treatment(94 cases) and open reductions & steel wire fixations(5 cases). Complication after operation was wound infection(1 case). Causes of death were 1 hypovolemia and 1 acute respiratory distress syndrome. In conclusion, although sternal fracture is less frequent, and mostly treats with conservative treatment, it shoed be carefully observed because of critical associated injuries.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.5
• /
• pp.451-458
• /
• 2013

This paper proposes a cross-tier interference avoidance scheme to improve femtocell performance in single frequency heterogeneous cellular networks (SFHCN). The scheduled macrocell users located close femtocell base stations cause serious interference to those femtocells so that the performance of femtocell is dramatically deteriorated. To solve this problem, this paper proposes an interference avoidance scheme by reversing the uplink and downlink frames of such femtocells. After reversing the uplink and downlink frames, femtocell base station relays the macrocell user data as well as transmitting its own data. In the 1st relaying link, femtocell and macrocell users transmit their data respectively divided uplink frames and in the 2nd relaying link, femtocell base station transmit macrocell and femtocell data using a simultaneously superposition coding scheme. Computer simulation results confirm performance improvement of proposed scheme.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.3
• /
• pp.378-386
• /
• 2017

A return-to-zero (RZ) digital-to-analog converter (DAC) with a tri-state switching scheme is proposed in this paper. The proposed scheme provides a triple weight output for RZ operation by using a conventional differential current switch and simple pseudo-differential F/Fs. The RZ function is realized with only two additional transistors in each F/F cell, which results in a power dissipation increase of less than 5%. To verify the performance of the proposed method, a 10-bit RZ DAC is fabricated using standard 180-nm CMOS technology. Measured results show that the worst SFDR performances are 60 dBc and 55 dBc in the 1st and 2nd Nyquist bands, respectively, when operating at 650 MHz clock frequency. The total power consumption is 64 mW, and the active area occupies $0.25mm^2$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.189-189
• /
• 2015

Plasmonics, sensor, field effect transistors, solar cells 등 다양한 적용분야를 가지는 실리콘 구조체는 제작공정에 의해 전기적 및 광학적 특성이 달라지기 때문에 적합한 나노구조 제작방법이 요구되고 있다. 나노구조체 제작방법으로는 Photo lithography, Extreme ultraviolet lithography (EUV), Nano imprinting lithography (NIL), Block copolymer (BCP) 방식의 방법들이 연구되고 있으며, 특히 BCP는 direct self-assembly 특성을 가지고 있으며 가격적인 면에서도 큰 장점을 가진다. 하지만 BCP를 mask로 사용하여 식각공정을 진행할 경우 BCP가 버티지 못하고 변형되어 mask로서의 역할을 하지 못한다. 이러한 문제를 해결하기 위하여 본 논문에서는 BCP와 질화막을 이용한 double mask 방법을 사용하였다. 기판 위에 BCP를 self-assembly 시키고 mask로 사용하여 hole 부분으로 노출된 기판을 Ion gun을 통해 질화 시킨 후에 BCP를 제거한다. 기판 위에 hole 모양의 질화막 표면은 BCP와 다르게 etching 공정 중 변형되지 않는다. 이러한 질화막 표면을 mask로 사용하여 pillar pattern의 실리콘 나노구조체를 제작하였다. 질화막 mask로 사용되는 template은 PS와 PMMA로 구성된 BCP를 사용하였다. 140kg/mol의 polystyrene과 65kg/mol의 PMMA를 톨루엔으로 용해시키고 실리콘 표면 위에 spin coating으로 도포하였다. Spin coat 후 230도에서 40시간 동안 열처리를 진행하여 40nm의 직경을 가진 PS-b-PMMA self-assembled hole morphology를 형성하였다. 질화막 형성 및 etching을 위한 장비로 low-energy Ion beam system을 사용하였다. Reactive Ion beam은 ICP와 3-grid system으로 구성된 Ion gun으로부터 형성된다. Ion gun에 13.56 MHz의 frequency를 갖는 200W 전력을 인가하였다. Plasma로부터 나오는 Ion은 $2{\Phi}$의 직경의 hole을 가지는 3-grid hole로 추출된다. 10~70 voltage 범위의 전위를 plasma source 바로 아래의 1st gird에 인가하고, 플럭스 조절을 위해 -150V의 전위를 2nd grid에 인가한다. 그리고 3rd grid는 접지를 시켰다. chamber내의 질화 및 식각가스 공급은 2mTorr로 유지시켰다. 그리고 기판의 온도는 냉각칠러를 이용하여 -20도로 냉각을 진행하였다. 이와 같은 공정 결과로 100 nm 이상의 높이를 갖는 40 nm직경의 균일한 Silicon pillar pattern을 형성 할 수 있었다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.15 no.3 s.39
• /
• pp.297-307
• /
• 1991

The purpose of this study was to investigate the effect of physical type and age on preference for color and fabric motifs in women's clothing design. Color preference measures consisted of fabric samples in solid colors and drawings of clothing styles painted in colors. Preference for fabric motifs was assessed by printed fabrics in various patterns and sizes. All of the preference measures were devised specifically for this study. Furthermore, items on height and weight for physical type as well as age of the subjects were included in the questionnaire. Data were obtained by means of structured interviews and self-administered questionnaires from 588 women ($20\~60$ years of age) in seoul. Analysis was by chi-square ($X^{2}$), frequency, percentage, and mean. On color preference, a small but significant body type, height, and age effect was found on some types of clothing. Preference for fabric motifs was affected by body type; height of subjects was related to preference for size of motifs, and age was related to choice, size, and width of striped motifs. It was concluded that body type, height, and age are 1e3st effective in predicting color preference. Fabric motif preference was influenced more by age than by body type or height. Generally, there was some similarities in preference for lines and fabric patterns among slim body types, tall figures, and younger age groups as well as heavy body types, short figures, and older age groups.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.8
• /
• pp.693-700
• /
• 2008

The primary mirror system in a satellite camera is an opto-mechanically coupled system for a reason that optical and mechanical behaviors are intricately interactive. In order to enhance the opto-mechanical performance of the primary mirror system, opto-mechanical behaviors should be thoroughly investigated by using various analysis procedures such as elastic, thermo-elastic, optical and eigenvalue analysis. In this paper, optimal design of the bipod flexure mounts for high opto-mechanical performance is performed. Optomechanical performances considered in this paper are RMS wavefront error under the gravity and thermal loading conditions and 1st natural frequency of the mirror system. The procedures of the flexure mounts design based on design of experiments and statistics is as follows. The experiments for opto-mechanical analysis are constructed based on the tables of orthogonal arrays and analysis of each experiment is carried out. In order to deal with the multiple opto-mechanical properties, MADM (Multiple-attribute decision making) is employed. From the analysis results, the critical design variables of the flexure mounts which have dominant influences on opto-mechanical performance are determined through analysis of variance and F-test. The regression model in terms of the critical design variables is constructed based on the response surfaceanalysis. Then the critical design variables are optimized from the regression model by using SQP algorithm. Opto-mechanical performance of the optimal bipod flexure mounts is verified through analysis.

• Journal of the Korean Society of Costume
• /
• v.56 no.4 s.103
• /
• pp.33-47
• /
• 2006

In 21 century, the ubiquitous environment is advanced fast through the so-called digital convergence. This research experts what is the next generation of traditional fashion product purchase behaviors. The purpose of this study is to analyze the fashion product purchase decision making in the development stages of ubiquitous environment. The quantitative Investigation was executed for 487 collegians and the data were analyzed with Frequency, percentage, ANOVA, Duncan test and multiple regression by using SPSS win version 10 package. The results of this research were as followed: First, in the 1st stages of ubiquitous developmental environment, using internet pc or mobile phone was analyze the difference between fashion shopping orientation group and purchase restricted factor Second, as a result of the factor analysis of the ubiquitous 2nd stages, four lower dimensions were made: giving information; wearable effect, buying facility; interest from purchase. as a result of ANOVA, there were any differences between fashion shopping orientation group and ubiquitous 2nd stages. Third, in the 3rd stages of ubiquitous developmental environment, there are differences between fashion shopping orientation group and ubiquitous 3rd stages. And the result from regression analysis of the ubiquitous 2nd stages and 3rd stages showed that buying facility factor in increasing need recognition, wearable effect factor in fashion information acquisition, giving information factor in have a intention to buy in ubiquitous #3 rendition are most influential.