• 수산해양기술연구
• /
• 제46권3호
• /
• pp.223-231
• /
• 2010

This paper showed the difference between the selectivity of gill net by least square method with polynomials in Kitahara's and that by maximum likelihood analysis for Japanese sandfish and Korean flounder. Catch experiments for Japanese sandfish using commercial vessels off the eastern coast of Korea were conducted with six different mesh sizes between October and December 2007 and those for Korean flounder with five different mesh sizes between 2008 and 2009. The mesh size of 50% probability of catch corresponding to biological maturity length of fish was not different between that by least square method and that by maximum likelihood analysis for Japanese sandfish, however, a little different for Korean flounder, that is, those mesh sizes of 50% probability of catch for biological maturity length of Korean flounder were 10.6cm and 10.1cm by least square method and maximum likelihood analysis, respectively.

• 동아시아식생활학회지
• /
• 제23권6호
• /
• pp.862-870
• /
• 2013

This study examines the effect of communication type of food service employees on the self-efficiency and organizational commitment. To accomplish the purpose of the study, a survey was conducted to employees of food service companies located in Seoul, from August 5, 2013 to August 25, 2013 as a method of empirical study. The results of this study was analyzed using the SPSS WIN 12.0 and statistical reliability analysis, factor analysis, frequency analysis, correlation analysis and multiple regression analysis were conducted for hypothesis verification. The analysis results of this study are as follows. First, the R-square of regression result for 'communication type will have a positive effect on self-efficiency' was .220. Also, it was found that factors of consideration (Beta=.286, t=5.622), instruction (Beta=.303, t=5.970) and business (Beta=.214, t=4.217) had positive effects on self-efficiency. Values for factors of consideration and instruction were higher than business. Second, the R-square of regression result for 'communication type will have a positive effect on organizational commitment' was .429. Also, it was found that factors of consideration (Beta=.453, t=10.428), instruction (Beta=.380, t=8.749) and business (Beta=.282, t=6.477) had positive effects on organizational commitment. Values for factors of instruction and business were high but value of consideration factor turned out the highest. Third, the R-square of regression result for 'self-efficiency will have a positive effect on organizational commitment' was .334. Also, it was found that out of the factors of positivity (Beta=.369, t=8.423), confidence (Beta=.415, t=8.833) and negativity (Beta=-.072, t=-1.536), positivity and confidence had positive effects on organization commitment, and only positivity and confidence showed high values in organization commitment. Upon analyzing the effect of factors of self-efficiency (positivity, confidence, negativity) on organizational commitment, it was found that positivity and confidence showed high relevance but the negativity factor did not have any correlation.

• 대한수학회지
• /
• 제54권4호
• /
• pp.1121-1148
• /
• 2017

Go is an ancient game of great complexity and has a huge following in East Asia. It is also very rich mathematically, and can be played on any graph, although it is usually played on a square lattice. As with any game, one of the most fundamental problems is to determine the number of legal positions, or the probability that a random position is legal. A random Go position is generated using a model previously studied by the author, with each vertex being independently Black, White or Uncoloured with probabilities q, q, 1 - 2q respectively. In this paper we consider the probability of legality for two scenarios. Firstly, for an $N{\times}N$ square lattice graph, we show that, with $q=cN^{-{\alpha}}$ and c and ${\alpha}$ constant, as $N{\rightarrow}{\infty}$ the limiting probability of legality is 0, exp($-2c^5$), and 1 according as ${\alpha}$ < 2/5, ${\alpha}=2/5$ and ${\alpha}$ > 2/5 respectively. On the way, we investigate the behaviour of the number of captured chains (or chromons). Secondly, for a random graph on n vertices with edge probability p generated according to the classical $Gilbert-Erd{\ddot{o}}s-R{\acute{e}}nyi$ model ${\mathcal{G}}$(n; p), we classify the main situations according to their asymptotic almost sure legality or illegality. Our results draw on a variety of probabilistic and enumerative methods including linearity of expectation, second moment method, factorial moments, polyomino enumeration, giant components in random graphs, and typicality of random structures. We conclude with suggestions for further work.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.394-396
• /
• 2006

When developing a new GPS receiver module, the essential problems are evaluation of reliable algorithms, software debugging, and performance comparison between algorithms to find optimal solution. Most GPS receiver modules nowadays use a correlator to track signals from satellites and an MCU (Micro Controller Unit) to control operations of the entire module. The problem of software evaluation from MCU is very difficult, due to limitation of MCU resources and low ability of interfacing with user. Normally, user has to expense special tool kit for a limiting access to MCU but it is also hard to use. This article introduces an implementation of a GPS receiver test bed using correlator GP2021 interfacing with ISA (Industry Standard Architecture) PC bus. This way can give user complete control and visibility into the operation of the receiver, then user can easily debug program and test algorithms. For this article, the least square method is implemented to test the hardware and software performance.

• Journal of Astronomy and Space Sciences
• /
• 제29권3호
• /
• pp.269-274
• /
• 2012

Kinematic global positioning system precise point positioning (GPS PPP) technology is widely used to the several area such as monitoring of crustal movement and precise orbit determination (POD) using the dual-frequency GPS observations. In this study we developed a kinematic PPP technology and applied 3-pass (forward/backward/forward) filter for the stabilization of the initial state of the parameters to be estimated. For verification of results, we obtained GPS data sets from six international GPS reference stations (ALGO, AMC2, BJFS, GRAZ, IENG and TSKB) and processed in daily basis by using the developed software. As a result, the mean position errors by kinematic PPP showed 0.51 cm in the east-west direction, 0.31 cm in the north-south direction and 1.02 cm in the up-down direction. The root mean square values produced from them were 1.59 cm for the east-west component, 1.26 cm for the south-west component and 2.95 cm for the up-down component.

• 헤리티지:역사와 과학
• /
• 제53권3호
• /
• pp.80-109
• /
• 2020

신라사천왕사는 670년 '조창(祖創)'된 이후 '개창(攺刱)'을 거쳐 679년에 낙성된 밀교사원이다. 본 연구는 근년의 발굴조사 성과와 사원건립과정 및 조영척도에 관한 고찰 결과를 바탕으로, 사천왕사건축의 설계기술 해명을 시도한 것이다. 연구결과는 다음과 같다. (1) 부지 조성에 있어서는, 낭산 남록 상에 1방(坊)의 크기를 상정, 그 남북 폭을 3등분한 후, 그 중 2구획분을 평탄부로 설정했을 가능성이 있다. (2) '조창'에 있어서는, 평탄면 남단을 경계로 하여 300척(尺)평방의 규모를 상정, 그 중심에 '선축기단'을 축조했던 것으로 추정되는데, 초기구상으로써 문두루(신인(神印))의 장치를 목적으로 한, 외원 2주(肘)(3척(尺)), 내원 1주(肘)(1.5척(尺))의 단(壇) 평면 의장을 자체 고안, 그것의 100배를 중심곽 규모 및 배치 계획에 있어서의 근거로 설정해 두었을 가능성이 있다.(3) '개창'에 있어서는, '선축기단'의 중심을 금당 중심으로 고수할 경우 발생되는 목탑·금당간거리 협소 문제를 인지, 초기구상으로부터 중심곽 규모 및 배치를 조정했던 것으로 판단된다. (4) 당탑 및 단석의 배치는, 확정된 중심곽 규모(280척(尺)×320척(尺))를 대상으로 한 분할에 기초해 결정되었는데, 동서방향에 있어서는 중심곽 동서 폭을 4등분하는 선상으로 정한 반면, 남북방향에 있어서는 중심곽 짜임새상의 특성에 입각, 동서회랑의 도리칸 분할과 조정을 통해 익랑 위치를 확정한 후, 이를 기준해 금당·단석을 배치했다고 추정된다. (5) 당탑 및 단석 등의 규모는 각 건물의 정면 기단 폭에 의해 제어되었던 것으로 인정된다. 특히 금당·목탑의 규모는 중심곽 동서 폭의 4등분으로부터 시작되는 단위분수적 분할의 반복을 통해 결정된 것으로 판단되는데, 이는 단의 평면의장을 전형으로 한 자기유사성에 연원을 둔 것으로 이해된다.

• 대한원격탐사학회지
• /
• 제37권5_2호
• /
• pp.1307-1315
• /
• 2021

매년 여름철 양자강에서 유출되는 저염분수는 동중국해 뿐만 아니라 제주도 주변 해역의 염분 변화에 큰 영향을 미치며 때때로 그 영향은 한반도 연안에 국한되지 않고 대한해협을 통과하여 동해 외해 까지 확장되기도 한다. 한반도 주변으로 확장된 양자강 유출수는 해양 물리 및 생태학적으로 많은 영향을 끼치며 어업 및 양식업에 큰 피해를 유발하기도 한다. 그러나 현장조사의 한계점 때문에 동중국해에서 확산되는 저염분수를 지속적으로 관측하기에는 현실적으로 어려움이 있다. 이러한 이유로 양자강 유출수의 확산을 실시간으로 모니터링하기 위해 인공위성을 활용한 표층 염분 산출 연구가 많이 진행되어 왔다. 본 연구에서는 시간 및 공간 해상도가 상대적으로 좋은 GOCI(Geostationary Ocean Color Imager)를 활용한 동중국해 표층 염분 산출 알고리즘을 개발하였다. 알고리즘 개발을 위해 기계학습 기법 중 하나인 MPNN(Multilayer Perceptron Neural Network)을 이용하였으며, 출력층에는 SMAP(Soil Moisture Active Passive) 위성의 표층 염분 자료를 활용하였다. 이전 연구에서 2016년 자료를 이용한 표층 염분 산출 알고리즘이 개발되었으나 본 연구에서는 연구 기간을 2015년 부터 2020년까지로 확장하여 알고리즘 성능을 개선하였다. 2011년부터 2019년까지 동중국해에서 관측된 국립수산과학원의 정선조사자료를 이용하여 알고리즘 성능을 검증한 결과로 R²는 0.61과 RMSE는 1.08 psu로 나타났다. 본 연구는 GOCI를 이용한 동중국해 표층 염분 모니터링 알고리즘 개발을 위해 수행되었으며, 향후 GOCI-II의 표층 염분 산출 알고리즘 개발에 많은 기여를 할 것으로 기대된다.

• Journal of Positioning, Navigation, and Timing
• /
• 제4권2호
• /
• pp.73-77
• /
• 2015

Global Positioning System (GPS) Precise Point Positioning (PPP) has been extensively used for geodetic applications. Since December 2012, BeiDou navigation satellite system has provided regional positioning, navigation and timing (PNT) services over the Asia-Pacific region. Recently, many studies on BeiDou system have been conducted, particularly in the area of precise orbit determination and precise positioning. In this paper PPP method based on BeiDou observations are presented. GPS and BeiDou data obtained from Mokpo (MKPO) station are processed using the Korea Astronomy and Space Science Institute Global Navigation Satellite System (GNSS) PPP software. The positions are derived from the GPS PPP, BeiDou B₁/B₂ PPP and BeiDou B₁/B₃ PPP, respectively. The position errors on BeiDou PPP show a mean bias < 2 cm in the east and north components and approximately 3 cm in the vertical component. It indicates that BeiDou PPP is ready for the precise positioning applications in the Asia-Pacific region. In addition, BeiDou tropospheric zenith total delay (ZTD) is compared to GPS ZTD at MKPO station. The mean value of their difference is approximately 0.52 cm.

• 건축역사연구
• /
• 제18권5호
• /
• pp.59-80
• /
• 2009

The purpose of this study is to investigate the history, space structures, blueprint, and techniques of the construction of Nam-hea city walls. Nam-hea city walls were relocated in 1439 from Whagumhun-Sansung(火金峴山城) to the present site, nearby Nam-hea Um.(南海邑) The city walls were rebuilt after they were demolished during Japanese invasion on Korea in 1592 and their reconstruction was also done in 1757. At present, the city walls only partially remained due to the urbanization of the areas around them. A plane form of the City wall is a square, and the circumference os approximately 1.3km. According to the literature, the circumference of the castle walls is 2,876尺, the height is 13尺, and the width is 13尺 4寸. Hang-Kyo(鄕校). SaGikDan(社稷壇), YoeDan(厲壇), SunSo(船所) which is a harbor, as well as government and public offices such as Kaek-Sa(客舍) and Dong-Hun(東軒) existed inside the castle walls. Inside the castle walls were one well, five springs, one ditch, and one pond, and in the castle walls, four castle gates, three curved castle walls, and 590 battlements existed. The main government offices inside castle walls were composed of Kaek-Sa, Dong-Hun, and Han-Chung(鄕廳) their arrangements were as follows. Kaek-Sa was situated toward North. Dong-Hun was situated in the center of the west castle walls. The main roads were constructed to connect the North and South castle gate, and subsidiary roads were constructed to connect the East and West castle gate. The measurement used in the blueprint for castle wall was Pobaek-scale(布帛尺:1尺=46.66cm), and one side of it was 700尺. South and North gate were constructed in the center of South and North castle wall, and curved castle walls was situated there. One bastion was in the west of curved castle walls and two bastions were in the east of curved castle walls. The east gate was located in the five eighths of in the east castle wall. Two bastions were situated in the north, on bastion in the south, one bastion in the south, and four bastions in the west castle wall. The castle walls were constructed in the following order: construction of castle field, construction of castle foundation, construction of castle wall, and cover the castle foundation. The techniques used in the construction of the castle walls include timber pile(friction pile), replacement method by excavation.

• 한국해양학회지:바다
• /
• 제29권1호
• /
• pp.1-13
• /
• 2024

동해 남서부해역은 대마난류나 연안 용승에 의한 영양염 공급 등으로 동해 북부나 동부에 비해 일차생산력이 높은 것으로 알려져 있지만, 이 해역의 생물 펌프에 관한 연구는 제한적이다. 본 연구에서는 O₂/Ar 측정으로 산출한 고해상도 순군집생산 현장 관측 결과와 기계학습 모형을 결합하여 시공간 해상도가 8일 간격, 4 km인 봄과 여름 순군집생산 시계열 자료를 추정하였다. 기계 모형의 예측과 실측의 평균 제곱근 오차는 6 mmol O₂ m^-2 d^-1로 관측값 평균의 15%에 해당했다. 울릉분지 중앙부의 순군집생산은 3월에 49 mmol O₂ m^-2 d^-1로 가장 높았고, 6월과 7월에 18 mmol O₂ m^-2 d^-1로 가장 낮았다. 이 같은 계절 변화는 ³He 기체교환율로 추정한 질산염 공급률이나 ²³⁴Th 비평형법으로 추정한 입자유기탄소 방출률과 유사하였다. 봄과 여름의 순군집생산 추정으로 한정된 이 연구방법을 가을과 겨울로 확대하기 위해서는 아표층수의 표층 혼입에 따른 O₂/Ar 순군집생산의 오차를 보정하는 연구가 필요하다.