• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.4
• /
• pp.85-93
• /
• 2011

A parametric study is conducted for the design of segmented arc plasma torch with the input power and current of 0.4 MW and 300 A, respectively. For this purpose, we use the analytical relationship between input power, current condition, plasma temperature, inner diameter (R) and length (L) of the torch constrictor based on arc channel model. The results reveal that arc plasma temperatures increase monotonically as ��L increases or R decreases for the ranges of R ${\leq}$ 7.5 mm and L ${\leq}$ 1.25 m. For larger valuse of ��R and L than 7.5 mm and 1.25 m, respectively, however, they show non-linear behavior corresponding to the variations of ��L, which stands for the generation of unstable arc plasma. From this parametric study, optimum ranges of R and L are suggested as 5.5 mm ${\leq}$ R ${\leq}$ 7.5 mm and 0.25 m ${\leq}$ L ${\leq}$ 0.5 m for 0.4 MW class segmented arc plasma torch, under which stable arc plasma can be achieved at the input currents of ~300 A.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.778-784
• /
• 2017

We investigated the possibility of a bio-monitoring system for predicting toxic dinoflagellates (Genus Alexandrium) by the measuring shell valve movements(SVMs) of Pacific oyster, Crassostrea gigas (Mollusca: Bivalvia) using the Hall element sensor. We then described the SVMs of Pacific oyster exposed to the toxic algae under laboratory conditions. Pacific oyster used for experiment were fed Isochrysis galbana until they stabilized and kept under hunger conditions for three days to prevent the influence of food before the experiment. Pacific oyster were exposed to the toxic dinoflagellate, A. fundyense, and the potentially toxic dinoflagellate, A. affine. When Pacific oyster were exposed to A. fundyense, SVMs increased over 10 times/hr at low cell densities of 20 cells/mL. SVMs increased again at $14.1{\pm}5.7times/hr$ at 500 cells/mL, and $27.9{\pm}11.1times/hr$ at the high cell density of 5,000 cells/mL. However, in the presence of A. affine, SVMs increased at $6.7{\pm}3.9times/hr$ until 300 cells/mL, while they increased greatly to $15.3{\pm}10.8times/hr$ at 1,000 cells/mL. The SVMs of Pacific oyster indicated differences depending on species for toxic dinoflagellates. Therefore, the SVMs of Pacific oyster could be useful for A. fundyense, but would bedifficult to apply for A. affine.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.861-866
• /
• 2007

This study was conducted to investigate an aeration tank with RBC process attached Bacillus sp. known as a suitable microorganism for the removing of organic carbon, nitrogen and phosphorus. An aeration tank was based on tapered aeration because Bacillus sp. was well grown in this like environment conditions. The biofilm process with Bacillus sp. as an advanced treatment process could be a best technology for the prominent removal of organic carbon, nitrogen and phosphorus if the mechanism in the process is verified. The operation conditions of DO in the tapered aeration tank were maintained as $1.2{\sim}1.5mg/L$ in aeration tank1, as $0.3{\sim}0.5mg/L$ in aeration tank 2 and less than 0.2 mg/L in aeration tank 3, respectively. Lab-scale experiments were conducted, at room temperature, internal recycle rate was from 200% to 50% and returned sludge rate was from 100% to 50%. As a result, concentration of organic carbons, nitrogen and phosphorus in Period 1 (the time of Bacillus sp. adapted to environment) were decreased gradually. Ultimately, each removal rate in this biological experiment were TCODCr 94%, BOD 87%, T-N 85%, T-P 89% in Period 2. Hence, this process showed an excellent performance of the removal of organic carbon, nitrogen and phosphorus and this is an effective system fur treating of wastewater.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.3
• /
• pp.505-510
• /
• 2000

In this study the effects of pre-chlorination on the coagulation of water which contain Microcystis aeruginosa. were investigated on the laboratory scale. We prepared the sample of $10^5cell/mL$ Microcystis aeruginosa and then applied 0.2, 1.0, 10 mg-Cl/L chlorine on the sample After reaction period(1 minute and 1 hour), each sample was coagulated. As a result, after 0.4 mg-Al/L coagulant dose, turbidities of all samples were below 2 mg-Kaolin/L. Turbidity was not affected by chlorine dose. As the dose of chlorine was increased, the residual aluminum was decreased, but result of $UV_{254}$ was adverse.

• Journal of Applied Biological Chemistry
• /
• v.64 no.1
• /
• pp.83-87
• /
• 2021

Antimicrobial activity of an aqueous extract from Caesalpinia sappan L. was investigated against skin flora such as Escherichia coli, Staphylococcus aureus, Cutibacterium acnes, and Malassezia furfur. The yield and polyphenol content of the aqueous extract were 14.01±0.81% and 487.5±19.69 ㎍/mg-extract, respectively. The minimum inhibitory concentration of the aqueous extract against E. coli, S. aureus, C. acnes, and M. furfur was 0.875, 1.750, 1.750, and 1.750 mg/mL, respectively. In disc diffusion test, the aqueous extract of C. sappan L. increased the clear zone in a dose-dependent manner. The aqueous extract inhibited the microbial growth in a concentration-dependent manner.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.7
• /
• pp.635-643
• /
• 2017

The purpose of this study is to investigate the influence of the cold reduction rate and an ultrasonic fatigue test (UFT) on the fatigue behaviors of STS 304L. The tensile strength, yield strength, hardness value and fatigue limit in the UFT fatigue test linearly increased as thickness decreased from 1.5 mm to 1.1 mm, as the cold reduction rate of STS 304L increased. As a result of the UFT fatigue test (R = -1) of four specimens, the fatigue limit of the S-N curve formed a knee point in the region of $10^6$, and the 2nd fatigue limit caused by giga cycle fatigue did not appeared. In the case of t = 1.1 mm, the highest fatigue limit was 345 MPa, which was 64.3% higher than the original material (t = 1.5 mm). As a result of the UFT fatigue test of STS 304L, many small surface cracks occurred, grown, coalesced while tearing.

• Journal of Microbiology and Biotechnology
• /
• v.3 no.4
• /
• pp.298-302
• /
• 1993

Pullulan was produced from starch hydrolysate with Aureobasidium pullulans SH8646. We could measure the correct amount of pullulan produced without the interference of starch from the culture supernatant by using a bacterial $\alpha$-amylase treatment and ethanol: acetone (1:1) precipitation. When 5% acid-hydrolyzed starch was used as a carbon source, the dry cell weights obtained were similar irrespective of DE values of starch hydrolysates. The dry cell weights of those on the starch hydrolysate media prepared with 0.1 N HC1 treatment, were slightly higher (9.5~10.5 g/l) than those on the starch hydrolysate media prepared with 1.0 N HCl (8.5~9.5 g/l). And among the starch hydrolysates showing DE values lower than 50, maximum pullulan production of 15 g/l was obtained at DE 30~40 starch hydrolysate but those showing DE values higher than 50, the pullulan production was increased with the increase of the DE value of starch hydrolysates. From the media containing 5%, 10%, and 15% starch hydrolysate (DE 25, 45, and 75), about 20~34% pullulan yield was obtained and the maximum pullulan yield of 34% (17g/l) was obtained from 5% DE 75 starch hydrolysate. The pullulan yields from starch hydrolysate media were much lower than those from glucose, maltose, maltotriose, and sucrose media.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.6
• /
• pp.739-747
• /
• 1997

This study was performed to clarify various conditions on the test of lipoxygenase-l and to establish the application of new test method for varietal improvement of soybeans in order to decrease beany flavors. Potassium borate and Tris were used as buffer and O.1M potassium borate solution showed the best result for the lipoxygenase-l test. In the range of pH 8.5~9.0 of the buffer, 2mM linoleic acid as substrate was effective. For color development, 100$\mu$l of two solutions(KI and starch) were added to the half soybean seed, successively. The substrate solution included linoleic acid was stored safely for 10 days at 4$^{\circ}C$ in refrigerator and for 4 days at room temperature. The best result was as follows; the 1ml of substrate solution[0.1M potassium borate(pH 9.0), 0.1％ Tween-20, 2mM linoleic acid] was added to the chipped half soybean seed in l.5ml plastic tube, waited for 15 minutes, and 100$\mu$l of color development solutions(5％ saturated KI in 15％ acetic acid, 1％ starch) were added to the tube, successively. After 4 hours, the purple color was observed in the upper phase of the plastic tube in the presence of lipoxygenase-1 and milky color in absence of lipoxygenase-1. The purple color was stable from 4 to 24 hours. There was no interfering effect by lipoxygenase-2 and -3. The plastic tube should be placed in the tube stand without shaking during the lipoxygenase-l test.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.7
• /
• pp.1038-1042
• /
• 2006

A new type of DTPA-bis-amides (L1-L4) and their Gd(III)-complexes of the type $[Gd(L)(H_2O)]{\cdot}nH_2O$ (5: L1; 6: L2; 7: L3; 8: L4) have been prepared and characterized by analytical and spectroscopic techniques. The X-ray crystal structure of 8 has been determined for structural confirmation. The coordination geometry adopts a tricapped trigonal prism geometry with L4 acting as a chelate octadentate and a water molecule in the coordination sphere. Crystals are monoclinic, $P2_1$, a = 14.468(3), b = 19.235(4), c = 13.527(2) $\AA$ $\beta$ = $107.245(3)^{\circ}$, V = 3595.2(11) $\AA^3$, Z = 4, $D_{calc}$ = 1.570. Significant increases in relaxivities are observed with 6 and 7 as compared with that of $Omniscan^{(R)}$, a commercial MR agent: R1 = 12.46 $mM^{-1}\;s^{-1}$, R2 = 8.76 $mM^{-1}\;s^{-1}$ for 6; R1 = 12.77 nm-1 s-1, R2 = 7.60 mM-1 s-1 for 7; R1 = 4.9 $mM^{-1}\;s^{-1}$, R2 = 4.8 $mm^{-1}\;s^{-1}$ for $Omniscan^{(R)}$. In the case of 5, however, both R1 and R2 are found to be lower to show 2.09 $mM^{-1}\;s^{-1}$, and 1.82 $mM^{-1}\;s^{-1}$, respectively.

• Korean Journal of Animal Reproduction
• /
• v.25 no.1
• /
• pp.63-69
• /
• 2001

This study was carried out to examine the effects of nitric oxide compounds (hemoglobin and L-NAME) on the development of porcine in vitro maturation (IVM) and in vitro fertilization (IVF) oocytes. Cumulus cell free embryos derived from porcine IVM/IVF oocytes were cultured in NCSU23 medium containing 1~5 $\mu\textrm{g}$/$m\ell$ hemoglobin added to 44 and 96hrs in culture times, and in NCSU23 medium containing 0, 10, 50 or 100mM L-NAME. The developmental rates beyond morulae stage in 0, 1 and 5 $\mu\textrm{g}$/$m\ell$ hemoglobin groups add to 44hrs in vitro culture times were 52.4%, 57.6% and 57.4%, respectively. The addition of hemoglobin groups made it slightly higher than the control group. The proportion of embryos developed to morulae and blastocysts in 1 $\mu\textrm{g}$/$m\ell$ hemoglobin add to 96hrs after in vitro culture (70.8%) was a little higher than those of 0 and 5 $\mu\textrm{g}$/$m\ell$ hemoglobin (66.2% and 62.8%). There was no significant difference in all groups (P〉0.05). The developmental rates beyond morulae stage in 0, 10, 50 and 100mM of L-NAME groups add to 96hrs after in vitro culture were 65.2%, 73.5%, 70.1% and 53.3%, respectively 10mM and 50mM L-NAME groups were significantly higher than in 0 and 100mM of L-NAME groups (P＜0.05). In conclusions, these results indicate that L-NAME (10mM, 50mM) can increase the proportion of embryos that develop into morulae and blastocysts but hemoglobin did not affect.