• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.3
• /
• pp.75-83
• /
• 2001

RIM(Reaction Injection Molding) is a widely used method to manufacture middle-large size outfit-part for a prototype car. The main advantage of RIM is the capability of manufacturing a small number of prototype parts with less cost and lead time than injection molding which is the most popular method to manufacture plastic parts. Generally, epoxy resin and RTV(Room Temperature Vulcanization) silicon are used as mold materials for RIM, and the selection of mold materials is usually depended upon the industrial environment of manufactures and it decides overall mold making process and part quality. This paper suggests a new mold making process by consolidating the advantages of epoxy resin and RTV silicon based RIM mold to enhance the parts quality while reducing the manufacturing cost and time and shows the competitiveness of the suggested process compared with conventional methods.

• Journal of Fashion Business
• /
• v.5 no.3
• /
• pp.49-61
• /
• 2001

In this study, girdle wearing was surveyed on the female college students in Seoul and Seoul satellite cities. Data were collected by convenient sampling method, and sample size was 252 subjects in 18 to 29 years. Questionnaire was composed of 5 parts: experience of girdle wearing, the preference of girdle type, degree of dissatisfaction/discomfort in wearing girdle, wear sensation evaluation of girdle fabrics, including demographic and anthropometric data. The results of surveys are as follows: Experience of girdle wearing (season of wearing girdle, main intention of wearing girdle, frequency of wearing, body part to want to be shaped by girdle) was examined. Especially body parts to be shaped by girdle were in order of abdomen > hip > thigh > waist-hip sideline. Therefore, it would be considered that female college students want to care about the shape of abdomen or hip. The long leg panty type was most preferred among the girdle types. The reason of preference of long leg panty type was cost > easiness of putting on-and-off > shaping many body parts at once. For dissatisfaction/discomfort in wearing the commercial girdles, it showed in order of poor ventilation at sweating > static electricity with outer garment > difficult breathing due to pressure > deformation after laundering.

• Journal of KIBIM
• /
• v.1 no.1
• /
• pp.18-25
• /
• 2011

Construction cost estimation in the early phase provides the opportunity to make reasonable decisions related to the project. For estimating this cost, various methods have been developed. But several problems have been recognized like accuracy, relation beteewn design and cost etc. In this study, we developed the method of cost estimating for building parts. The modified method has defferent ratio of space functions to calculate cost more correctly. Also historical cost data is used in this modified method for architects to estimate cost conveniently. By this modified method, we expects architects should easily design buildings based on cost.

• Journal of Applied Reliability
• /
• v.13 no.1
• /
• pp.11-18
• /
• 2013

For a reliability assessment of machinery parts, accurate performance test, environmental test, life test, etc. are required on the sample. In the performance test conditions of various machinery parts, some problems happen such as needs to rise temperature rapidly with large flow of oil having very low thermal conductivity and to measure very high torque or tiny torque, etc. This study brings out the method to apply heat to rise temperature for large flow of oil without chemical change in a performance test of oil cooler. To measure large scale of torque in a performance test of planetary gearbox of excavator, the method of torque measurement is proposed by replacing the large torque meter priced very expensive. To measure very small torque on lubricated friction, a methode of force balance type test mechanism is introduced for tests of piston assembly.

• Journal of the Korean Society of Safety
• /
• v.18 no.3
• /
• pp.69-74
• /
• 2003

To investigate the partial discharge and electric field distribution in cable joint parts, we measured the partial discharge and electric field in specimen. The specimens which cross-linked polyethylene(XLPE) and ethylene propylene diene ethylene(EPDM) are used to insulating material for underground cable md cable jointing parts. The polymers are used to insulating material in switchgear which is a kind of transformer equipment and in ultra-high voltage cable. Its using is increasing gradually, the electrical insulation properties are not only excellent but also mechanical property is excellent. And because it is possible to be made void of several type in insulator while it is produced, which the electrical field distribution is changed by void, it has a critical influence to insulator performance. The underground cable is connecting by the jointing material, insulating breakdown and the electric ageing which are caused by several mixing impurity and the damage of cable insulator layer, which reduced the life of cable while intermediate joint kit is connected. Therefore, the computer simulation is used to estimating insulator performance, XLPE is used to the insulating material of ultra-high voltage cable and EPDM is used to insulator layer in joint material kit, and which are produced as specimen. And it is analyzed the electric field concentrating distribution and partial discharge by modeling of computer simulation in void and cable joint kit.

• Korean Journal of Computational Design and Engineering
• /
• v.18 no.1
• /
• pp.1-9
• /
• 2013

Nowadays in order to perform assembly process planning by using CAPP (Computer Aided Process Planning), researches to generate the assembly sequence automatically have come under constant interest by many researchers and they are devoted to optimize the assembly sequence. In this paper, the product on analyzing the relationship between assembled parts via contacting information such as common area, automatically based on the liaison graph of the product. To verify the validness and efficiency of the approach, the simple product is tested in the experimental way.

• Journal of Welding and Joining
• /
• v.18 no.1
• /
• pp.70-76
• /
• 2000

A rolled steel for structural parts and lead bronze alloy were bonded each other by a new semi-solid diffusion bonding process to investigate the effect of the process parameters, for example bonding temperature and bonding time, on the interface characteristics, and bonding behavior. It can be possible that manufacture of the bonded steel/lead bronze which has a cylindrical shape with inserted the lead bronze alloy into the steel ring by the diffusion bonding process under the semi-solid condition of the lead bronze alloy without any pressure and flux. It has been know that the control of the amount of the liquid phase in semi-solid lead bronze alloy was very important to obtain soundness interface, since the shear strength of the bonded steel/lead bronze at 850℃ for 60 minutes under the condition of about 40% of the liquid phase in the lead bronze alloy shows maximum value, 210 MPa. The shear strength increases with an increase in bonding time and show maximum value, and then decreases.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.135.1-135
• /
• 2003

A technique for detection of Xanthomonas axonopodis pv. citri, a causal bacterium of canker on Unshiu orange fruits, was developed using bacteriophage. Procedure for the detection was designed on the basis of the previous reports that one group(CPI) of X. axonopodis pv. citri bacteriophage and corresponding two Iysotypes distributed in Korea. First, fruit surface was washed with sterile distilled water and pellet was obtained from centrifugation. The pellet was resuspended in Wakimoto's potato semi-synthetic broth medium and divided equally into two parts. One part was heated in boiling water to kill bacterial cells. Bacteriophages(CP$_1$) were respectively added into two parts and 0.1 ml from each part was mixed with soft agar medium. After incubation for 18 hrs at 25$^{\circ}C$, the causal bacterium of canker was determined based on plaques formed on the medium. This procedure can be effectively used for detection of living bacterial pathogen on fruit surfaces of Unshiu orange.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.6
• /
• pp.903-912
• /
• 2016

Morphological and anatomical evaluation of grafted P. merkusii have been undertaken to obtain the information about compatible and incompatible symptoms of 18 years old grafts based on morphological observation and microscopic analysis. Samples of compatible and incompatible grafts were obtained from previous research conducted by the Silviculture Departement Team in 1994. Result showed that compatible grafts have normal stem form and secondary growth (diameter growth), but some abnormality symptoms like undulated pattern of annual growth rings, phloem thickening and abnormality resin ducts in inner and middle parts of the union area occurred. Incompatible ones showed abnormality of the stem form, cortex-bark necrosis and swelling in the union area. Microscopic observation showed abnormality of all parts of the union, undulated pattern of annual growth rings, phloem thickening, abnormal resin ducts, low numbers and discontinuity of vascular elements in the union area.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.4
• /
• pp.55-63
• /
• 2001

This paper describes a methodology of product function deployment for understanding product functions and generating systematic functional relation charts. The product function deployment is based on the designer's understanding of product functions. The method involves following steps: 1) definition of product primary function and flows of energy, material, and information, 2) construction of a product tree using key parts, 3) definition of functions and interactions of the functional units, 4) construction of 'from-to' relation matrices, 5) grouping of the parts, and 6) construction of functional relation charts. With this approach, functional relation charts can be generated such that complex product functions are easily understood. The functional relation chart of a refrigerator is generated as an example.