• Microbiology and Biotechnology Letters
• /
• v.8 no.1
• /
• pp.55-60
• /
• 1980

Some of the cultural conditions were improved in order to obtain the higher biomass of Lactobacillus bulgaricus NLS-4 which has the higher lactic acid producing activity as well. Among eight media including 11％ non-fat milk medium as a control, the TIP medium was selected. By a batch experiment, the maximum cell concentration could be increased to 1.0$\times$10$^{9}$ cells per $m\ell$ when the organism was grown at 38$^{\circ}C$ for 18 hours with agitation speea of 200 rpm and under the constant level of pH 6.5 con-trolled with 1 N KOH solution in the selected medium. The cell concentration was further increased to 2.3$\times$10$^{9}$ cells per me in the steady state of continuous culture at the dilution rate of 0.17 hr$^{-1}$ for 18 hours.

• Korean Journal of Soil Science and Fertilizer
• /
• v.6 no.4
• /
• pp.205-211
• /
• 1973

General physical and chemical characteristics of eleven apple orchard soils derived from granite, granodiorite, diorite, arkose sandstone and shale were investigated in relation to soil profile. The results are summerized as follows: 1. Soils were mostly sandy and showed pH 4.35 to 6.75, 1.14 to 5.58 of organic matter, 0.065 to 0.209% of nitrogen. All properties decreased with depth. 2. Total exchangeable bases of surface soils were comparablly low (4.89 to 17.81me/100g, Ca>Mg>K>Na). Cation exchange capacity ranged from 7.74 to 21.72 mg/100g and base saturation percentage from 22.52 to 94.62%. 3. Phosphorus content of surface soil was very low (less than 35.5 mg/100g). The contents of potassium (7.2-79.2 mg/100g), available copper (1.0-16.9 ppm) and water soluble boron (0.18-0.72 ppm) were high in surface soil but low with depth. The content of manganese showed clear difference with pH, that is, at pH 4 to 6 water soluble manganese ranged from 0.42 to 17.8 ppm and exchangeable manganese from 9.82 to 66.38 ppm but above pH 6 the water soluble was less than 0.70 ppm and the exchangeable less than 22.25 ppm.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2023.04a
• /
• pp.38-38
• /
• 2023

Sorghum (Sorghum bicolor L.) is a promising biomass crop with a high lignocellulose content. This study aimed to select high salt-tolerance sorghum lines for cultivation on reclaimed land. Using 7-day seedlings of the sorghum population consisted of 71 radiation-derived mutants (M₂ to M₆) and 33 genetic resources, survival rate (SR), plant height (PH), root length (RL), fresh weight (FW), and chlorophyll content (CC) were measured for two weeks after 102 mM (0.6%) NaCl treatment. Furthermore, the characteristics of the sorghum population were confirmed using correlation analysis, PCA (principal component analysis), and the FCE (fuzzy comprehensive evaluation) method. Under 102 mM NaCl conditions, SR ranged from 4.9 (IS645-200-6) to 82.4% (KLSo79125-200-1), with an average of 49.9%. PH varied from 7.5 (Mesusu-100-2) to 33.2 cm (DINE-A-MITE-100-2-10), with an average of 20.4 cm. RL ranged from 1.0 (IS645-200-1) to 17.0 cm (30-100-2), with an average of 7.7 cm. FW varied from 0.1 (IS645-200-6) to 4.5 g/plant (DINE-A-MITE-100-2-10), with an average of 2.1 g/plant. CC ranged from 0.9 (DINE-A-MITE-100-2-2) to 3.1 mg/g (IS12937), with an average of 1.7 mg/g. An overall positive correlation, with SR and FW (r = 0.86, P < 0.01), and FW and CC (r = 0.79, P < 0.01), was shown by correlation analysis. Among the five traits, two principal components were extracted by PCA analysis. PC1 was significantly associated with FW, while PC2 was highly involved with RL. To evaluate the salt tolerance level of the sorghum population when an FCE based on trait data was performed, MFV (membership function value) was 0.68. As a result of compiling the MFV of each line, eight lines with MFV > 0.68 were selected. Ultimately, the radiation-derived mutant lines, DINE-A-MITE-100-2-10 and DINE-A-MITE-100-2-12 were selected as salt-tolerant sorghum lines. The results are expected to inform salt-tolerant sorghum breeding programs, and the high salt-tolerance sorghum lines might be advantageous for cultivation on reclaimed land.

• Resources Recycling
• /
• v.22 no.2
• /
• pp.18-21
• /
• 2013

In this study, surface modification of wood powder by atmospheric pressure plasma treatment was investigated. The composites were manufactured using wood powder and polypropylene(wood powder : PP = 55 wt% : 45 wt%). Atmospheric pressure plasma was treated as condition of 3KV, $17{\pm}1$KHz, 2 g/min. Helium was used as carrier gas and monomer such as hexamethyl-disiloxane(HMDSO) was used to modify surface property by plasma polymerization. The tensile strength of untreated waste wood powder(W3) and homogeneous wood powder(H3) were about 18.5 MPa, 21.5 MPa while the tensile strength of plasma treated waste wood powder(PW3) and homogeneous wood powder(PH3) were about 21.2 MPa, 23.4 MPa, respectively. And tensile strength of W3 and H3 were improved by 14.6% and 8.8%, respectively. From the results for mechanical property, morphological analysis, we obtained improved interfacial bonding of polypropylene and wood powder modified by plasma treatment.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.45 no.1
• /
• pp.1-10
• /
• 2012

The objective of this study was to investigate the sanitary and nutritional requirements for the industrialization of commercial kwamegi from Pacific herring Clupea pallasii (CK-PH). The proximate composition of CK-PH was 46.4-47.2% moisture, 24.7-25.6% crude protein, 23.6-25.2% crude lipid, and 2.5-2.9% ash, which differed significantly from that of commercial kwamegi from the Pacific saury Cololabis saira. According to the volatile basic nitrogen content, heavy metal content, and viable cell and coliform group counts, products K and F (prepared by a general process) maintained their freshness, whereas product T (treated with green tea extract) did not. Products K and F contained five types of biogenic amine: agmatine sulfate (2,596 and 2,067 mg/kg, respectively), putrescine dihydrochloride (8.5 and 8.0 mg/kg, respectively), cadaverine (3.7 and 3.9 mg/kg, respectively), histamine (17.0 and 12.4 mg/kg, respectively), and spermidine (8.7 and 8.0 mg/kg, respectively). Product T contained six amine types: tyramine (12.5 mg/kg), agmatine sulfate (2,723 mg/kg), putrescine dihydrochloride (29.4 mg/kg), cadaverine (321.6 mg/kg), histamine (45.3 mg/kg), and spermidine (13.6 mg/kg). The total amino acid content of product K (22.16/100g) was 5.8% lower than that of product F. The major amino acids of products K and F were aspartic acid, glutamic acid, leucine, and lysine. No difference was found in the fatty acid composition of products K and F. The major fatty acids in products K and F were 18:1n-9, 20:5n-3, and 22:6n-3. Based on the recommended daily dietary allowances for Koreans, the significant minerals in products K and F were calcium, phosphorus, and magnesium.

• Microbiology and Biotechnology Letters
• /
• v.17 no.5
• /
• pp.510-518
• /
• 1989

Most of orange peels are disposed from orange juice manufacturing process. Thus, our purpose is to utilize these orange peels as fermentation substrate. We have investigated culture conditions and factors influencing citric acid production by an isolated strain, Asp. niger. Citric acid production was much higher in semisolid culture than in submerged culture and the particle size of ground orange peels was favored at 20 mesh in semisolid culture. The optimal pH and temperature were 4.5-5.0 and 3$0^{\circ}C$ respectively and the temperature cycling at 35$^{\circ}C$ for 20 hrs durig exponential phase, 1$0^{\circ}C$ for 4 hrs and 3$0^{\circ}C$ during stationary phase showed higher citric acid production than did at fixed temperature, 3$0^{\circ}C$. The addition of NH$_4$NO$_3$0.2%, MgSO$_4$7$H_2O$ 0.1%, methanol 2.5%, ethanol 1.5%, to culture medium promoted citric acid production but the addition of trace metal ions as nutrients had not effect on the acid production in orange peel medium. Under the optimal culture conditions, maximum yield of citric acid was 80.4% in solid medium. Almost of all original components of citrus peel was consumed by Asp. niger during fermentation.

• Journal of environmental and Sanitary engineering
• /
• v.22 no.1 s.63
• /
• pp.17-27
• /
• 2007

This study was conducted the adsorption experiment way of organic wastewater (BOD, COD, TOC, T-N, T-P) by changing the carbonization temperature and the size of adsorbent to examine the adsorption capacity of Korean traditional charcoal which has similar characteristics to activated carbon of organic pollutants. Also, it was performed the basic experiment for pH and inorganic materials. As a result of observing Korean traditional charcoal with has the greatest inorganic contents which are the important factor of chemical adsorption. As the carbonization temperature was better high temperature charcoal than law temperature charcoal to adsorption capacity of pollutant and as the particle was minute (D size : $3.35mm{\sim}2.0mm$), it was most effective. The result of adsorption experiment of organic wastewater show that the elimination ratio of pollutants by bamboo high temperature charcoal was found as BOD(82.1%), COD(91.7%), TOC(52.4%), T-N(66.6%), T-P(83.2%) and it has most excellent adsorption capacity of organic pollutants.

• Journal of Powder Materials
• /
• v.14 no.3 s.62
• /
• pp.202-207
• /
• 2007

Novel polymer mold process for fabrication of microcomponents using metal nanopowders was developed and experimentally optimized. Polymer mold for forming green components was produced by using a hard master mold and polydimethylsiloxane (PDMS). In the preparation of metallic powder premix for the green components without any defect, 90 wt.% 17-4PH statinless steel nanopowders and 10 wt.% organic binder were mixed by a ball milling process. The green components with very clear gear shape were formed by filling the powder premix into the PDMS soft mold in surrounding at about $100^{\circ}C$. Cold isostatic pressing (CIP) was very potent process to decrease a porosity in the sintered microcomponent. The microgear fabricated by the improved process showed a good dimension tolerance of about 1.2%.

• Korean Journal of Food Science and Technology
• /
• v.17 no.5
• /
• pp.383-388
• /
• 1985

Soy protein isolate was acylated with succinic anhydride and acetic anhydride. The functional properties are markedly improved by acylation of the $\varepsilon$-amino groups. Acylation of the available amino groups shifted the isoelectric point from 4.5 to 4.0 and enhanced the solubility between pH 4.0-6.0. In the 0.03M-$CaCl_2$ solution the solubility of the modified soy protein is much larger than that of the unmodified protein above the isoelectric point. The emulsion properties and foaming properties also improved by the modification and the effects of pH on the properties paralleled its effect on protein solubility. The changes of reduced viscosity with concentration followed Huggin's equation and by modification the intrinsic viscosity of the soy protein increased and the interaction coefficient decreased.

• Microbiology and Biotechnology Letters
• /
• v.17 no.2
• /
• pp.136-141
• /
• 1989

A raw starch-digesting enzyme from Streptomyces sp. 4M-2 was purified by ammonium sulfate fractionation, DEAE-Sephadex A-50 column chromatography and Sephadex G-100 gel filtration. The specific activity of the purified enzyme was 51.22 RSU/mg protein and the yield was 4.5% of the total activity of the culture broth. The purified enzyme was found to be homogeneous by polyacrylamide gel electrophoresis and its molecular weight was estimated to be about 102, 000 daltons by SDS-polyacrylamide gel electrophoresis, The optimal temperature and pH for the enzyme activity were 42$^{\circ}C$ and PH 5.5, respectively. The enzyme had Km, value of 44.44mg/$m\ell$ for raw corn starch. The enzyme was activated by addition of calcium and barium ions. Corn amylose was degraded by the enzyme very easily and raw potato starch was also degraded easily. Main products of the enzymatic hydrolysis of raw corn starch were analyzed to be maltose and maltotriose. The enzyme was considered as $\alpha$-amylase.