• Proceedings of the Membrane Society of Korea Conference
• /
• 2002.05a
• /
• pp.106-109
• /
• 2002

No Abstract, See Full-text

• Journal of Sensor Science and Technology
• /
• v.1 no.1
• /
• pp.85-92
• /
• 1992

A new potassium sensitive field effect transistor modified with 4'-aminobenzo-15-crown-5 was prepared and its response characteristics were evaluated. The response slope of $K^{+}-ISFET$ for pH was 30.0 mV/decade and the response time was mere than 3 minutes. And the response slope and time of the $K^{+}-ISFET$ for potassium ion as $19.5{\pm}0.2{\;}mV/decade$ and about 3 minutes, respectively. The linear response range of the sensor for potassium ion was $2.0{\times}10^{-4}{\sim}1.0{\times}10^{-2}M$. The selectivity coefficients of the $K^{+}-ISFET$ for the alkali and alkaline earth metal ions were also evaluated. Sodium, ammonium and calcium ions exhibited relatively significant interference. The long term stability of the sensor was remarkably improved and it could be used for more than 50 days.

• Journal of the Korean Chemical Society
• /
• v.37 no.8
• /
• pp.773-778
• /
• 1993

Poly(vinyl chloride)(PVC) membrane electrodes based on the lipophilic neutral carrier, dibenzo-18-crown-6(DB18C6) and benzo-15-crown-5 (B15C5) as the active sensors for Tl$^+$ ion have been prepared and tested in different content of the potassium tetrakis(4-chlorophenyl)borate (KTClPB) as lipophilic salt. Dioctyl adipate (DOA), 2-nitrophenyl phenyl ether (NPPE) and o-nitrophenyl actyl ether (NPOE) were used as plasticizing solvent mediators. Electrodes exhibited good linear responses of 40∼55 mV decade$^{-1}$ for Tl$^+$ ion within the concentration ranges 10$^{-1}$∼10$^{-5}$M TlNO$_3$. Selectivity coefficients of interfering ions (alkali metal, alkaline earth metal and some transition metal ions) for Tl$^+$-ISE were determined by separate solution method and were sufficiently small for most of them. These crown ether type ion-selective electrodes are suitable for use with aqueous solution at pH > 3.

• Bulletin of the Korean Chemical Society
• /
• v.13 no.3
• /
• pp.274-279
• /
• 1992

Immobilization method of lariat azacrown ethers, containing hydroxyl group in the side arm of crown ring, on the polymer matrix and the phase-transfer catalytic activity of thus obtained immobilized lariat azacrown ethers were studied. Polystyrene resins with crown ether structures and hydroxyl groups adjacent to the macrorings were prepared by the reaction of crosslinked polystyrene resins containing epoxy groups with monoaza-15-crown-5 or monoaza-18-crown-6. Microporous crosslinked polystyrene resins containing epoxy group for the syntheses of these immobilized lariat crown catalysts were prepared by suspension polymerization of styrene, divinylbenzene (DVB 2%) and vinylbenzylglycidyl ether. The immobilized lariat catalysts with 10-20% ring substitution exhibited maximal activity for the halogen exchange reactions of 1-bromooctane with aqueous KI or NaI under triphase heterogeneous conditions. Immobilized catalyst exhibited higher activity than corresponding catalyst without the hydroxyl group and this result was suggested that the active site have a structure in which the $K^+$ ion was bound by the cooperative coordination of the crown ring donors and the hydroxyl group in the side arm.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.08a
• /
• pp.133-136
• /
• 2003

New porphyrin square (1) was prepared by reaction of porphyrin containing pyridine and $Re(CO)_5Cl$ in THF/toluene solvent. 2-(Methylenel5-crown-5)-nicotinoly ester(2) was synthesized by reaction of 2-(Hydroxymethyl-15-crown-5 and nicotinoly chloride in $CH_2Cl_2$. In fluorescence quenching studies luminescence was quenched by addition of the guest(2) into host(l). In the host-guest system we could obtain binding constant (K=$1.13{\times}10^7M^{-1}$) at decreasing concentration of (2). But the luminescence was dramatically increased after $Na^+$ was added into the host-guest system.

• Applied Chemistry for Engineering
• /
• v.9 no.6
• /
• pp.842-845
• /
• 1998

Four new lactones and one dibenzo crown ether were synthesized by reaction of dihydroxy compound with oxalyl chloride and with ${\alpha}$,${\omega}$-dibromo compound, respectively. 5,6,11,12-Tetracarbonyl-2,2,3,3,8,8,9,9-octaphenyl-1,4,7,10-tetraoxacyclodode- cane(1), 5,6,11,12-tetracarbonyl-2,2,3,3,8,8,9,9-octamethyl-1,4,7,10-tetraoxacyclododecane(2), 7,8,15,16-tetracarbonyl-1,6,9,14-tetraoxacylclohexadecane(3), and 5,6,11,12-tetracarbonyl- 2,3,8,9- tetraphenyl-1,4,7,10-tetraoxacyclododecane(4) were prepared by reaction of oxalyl chloride with benzopinacol, pinacol, 2,2'-dihydroxybiphenyl and hydrobenzoin, respectively, in the presence of pyridine. Dibenzo-13-crown-4 (5) was obtained by reaction of catechol with 1,3-dibromopropane/1,2-dibromoethane.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.58 no.5
• /
• pp.71-79
• /
• 2016

The effects of spot heating for growing the strawberry cultivated in a plastic greenhouse during the winter that were estimated in Nonsan strawberry experiment station located in Chungnam. The temperature of water for heating was controlled by a electric hot water boiler and kept at the range of $22{\sim}24^{\circ}C$. Heating pipes were set up in root zone for root zone heating and very close to crown for crown heating. Spot heating effects were estimated by applying spot heating system in three test factors of heating root zone, crown only and crown plus root zone. The material for crown heating pipe was white low density polyethylene and the nominal diameter of that pipe was 16 mm. The material for root zone heating pipe was flexible stainless steel and the nominal diameter of that pipe was 15A. The flow rate of heating water circulation was 480 L/h and water circulation lasted for all day long. Temperatures, harvest yield by test beds were surveyed from Nov. 10, 2013 to Apr. 29, 2014. The temperature of crown spot for crown heating bed was at the range of $13.0{\sim}17.0^{\circ}C$ during the night and that of crown spot in control bed was at the range of $8.0{\sim}14.0^{\circ}C$. Also, the temperature of root zone for root zone heating bed was at the range of $18{\sim}21.0^{\circ}C$ and that of root zone in control bed was at the range of $13.0{\sim}15.0^{\circ}C$. The cumulative yield growth rate in earlier harvest period (from Dec. 20 to Mar. 15) of crown heating bed was 43% compared with that of control bed and the cumulative yield of crown plus root zone heating bed was 39 % and that of root zone heating bed was 39 %.

• Journal of the Korean Chemical Society
• /
• v.47 no.1
• /
• pp.13-18
• /
• 2003

The effect of ultrasonic decomposition was introduced to develop a pretreatment method for the analysis of potassium ion in human urine by potentiometry. N-(4’-benzo-15-crown-5)-anthracene-9-imine, which has a good selectivity coefficient for potassium against ammonium, was used as an ion-selective material for the determination of potassium in urine with relatively high concentration of $NH_4{^+}$. Protenis in urine be removed by 85.1% when the sample acidified with 1.0 M $HNO_3$ was preteated for 100 s by sonication. Potential response of the membrane electrode in the pretreated urine had a slope of 54.6(${\pm}0.2,\;n=5$) mV/decade over the linear range of log $[K^+]$=-5~-1(r=0.9997). When an oxidant, $H_2O_2$, was addwd to the urine sonicated with $HNO_3$, the deproteinization increased 10% more than that in case if only $HNO_3$ and then the maximum ratio of ca. 95% was obtained. Moreover, the Nernstian slope for $K^+$ added to the urinary sample increased to 56.7(${\pm}0.1,\;n=3$) mV/decade. When the calibration curves were measured, the slopes did not vary even after the electrode was successively used 20 times with ultrasonic cleaning. The results showed that an ultrasonic pretreatment method provides simplicity in use, reduced treatment time and improved potentiometric characteristics of the membrane as the method effectively removes ca. 95% of proteins in urine.

• Korean Journal Plant Pathology
• /
• v.10 no.1
• /
• pp.64-67
• /
• 1994

Crown rot was found find tomatoes growing on a rockwool culture system in a glasshouse at Dongkwangyang in 1992. The disease occurred on the stem of 'Trust' tomato plants with 3~4 cluster of flowers. Infected plants showed stem girdling and necrosis at or slightly above the rockwool line. Internal tissues of crown and stem including cortex, vascular bundle, and pith became decayed resulting in a chocolate-brown discoloration extending no more than 10~15 cm above the crown. Diseased tomato plants with the similar symptoms were found at Ansung and Taejon where tomatoes were grown on either rockwool or soil in plastic greenhouses. The size of macroconidia of Fusarium isolated from a diseased plant was 26.0~41.6$\times$2.9~4.7${\mu}{\textrm}{m}$, and microconidia were formed on short monophialide and the size was 3.6~12.5$\times$2.9~3.6 ${\mu}{\textrm}{m}$. Morphological characteristics and inoculation tests indicated that the causal organism of the disease was Fusarium oxysporum.

• Journal of environmental and Sanitary engineering
• /
• v.23 no.1
• /
• pp.57-65
• /
• 2008

Resins were synthesized with 1-aza-15-crown-5 macrocyclic ligand attached to styrene(dangerous matter) divinylbenzene(DVB) copolymer with crosslink of 1, 2, 6 and 15% by substitution reaction. The synthesis of these resins was confirmed by content of chlorine, element analysis, and IR-spectrum. The effects of pH, time and crosslink on adsorption of metal ion　from water fire extinguishing agent by the synthetic resin adsorbent were investigated. The metal ion was showed fast adsorption on the resins above pH 3. The optimum equilibrium time for adsorption of metallic ions was about two hours. The adsorption selectivity determined in water was in increasing order of $Mg^{2+}>Al^{3+}>Pb^{2+}$. The adsorption was in the order of 1, 2, 6, and 15% crosslink resin.