• Korean Journal of Ecology and Environment
• /
• v.54 no.1
• /
• pp.12-23
• /
• 2021

As fish communities are sensitive to natural environmental changes as well as anthropogenic pressures, their composition and characteristics help us to assess the aquatic ecosystem health. The fish fauna and the length-weight relationship of Zacco platypus in the Seomjin River system were investigated from July 2018 to May 2019. The collected species during the survey period were 49 species belong to 14 families including 19 Korean endemic and two endangered species. According to Bray-Curtis similarities, 14 sites were divided into four groups based on the fish community composition; two groups(group A, B) and two uncategorized sites(group C, D). There were significant differences between groups A and B(analysis of similarities, R=0.722, p=0.002). A similarity percentage analysis revealed that Z. koreanus(8.55%), Micropterus salmoides(6.90%), and Lepomis macrochirus (4.90%) contributed to these differences of fish assemblages between group A and B. Group A showed higher relative abundances of exotic species such as M. salmoides and L. macrochirus, while Z. platypus and Z. koreanus which are the common species in Korea, were the most dominant species in group B. Based on the length-weight relationship of Z. platypus, b values were varied from 2.82 to 3.80, indicating that growth patterns of the species were spatially different. This study could be served as baseline data for understanding fish fauna, assessing habitat characteristics based on the fauna, and identifying health conditions of Z. platypus in the Seomjin River system.

• ETRI Journal
• /
• v.36 no.1
• /
• pp.167-170
• /
• 2014

In this letter, we propose an unsupervised framework for speech noise reduction based on the recent development of low-rank and sparse matrix decomposition. The proposed framework directly separates the speech signal from noisy speech by decomposing the noisy speech spectrogram into three submatrices: the noise structure matrix, the clean speech structure matrix, and the residual noise matrix. Evaluations on the Noisex-92 dataset show that the proposed method achieves a signal-to-distortion ratio approximately 2.48 dB and 3.23 dB higher than that of the robust principal component analysis method and the non-negative matrix factorization method, respectively, when the input SNR is -5 dB.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.10 no.4
• /
• pp.276-281
• /
• 2010

A 2.5 V feed-forward second-order deltasigma modulator for audio application is presented. A 9-level quantizer with a tree-structured dynamic element matching (DEM) was employed to improve the linearity by shaping the distortion resulted from the capacitor mismatch of the feedback digital-toanalog converter (DAC). A chopper stabilization technique (CHS) is used to reduce the flicker noise in the first integrator. The prototype delta-sigma analogto-digital converter (ADC) implemented in a 65 nm 1P8M CMOS process occupies 0.747 $mm^2$ and achieves 109.1 dB dynamic range (DR), 85.4 dB signal-to-noise ratio (SNR) in a 24 kHz audio signal bandwidth, while consuming 14.75 mW from a 2.5 V supply.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.1
• /
• pp.16-20
• /
• 2017

A RF-MEMS (radio-frequency microelectromechanical-system) based DPDT (double pole double throw) switch for the Ku band has been designed and analyzed for this article. The switch topology is based on the FG-CPW (finite ground-coplanar waveguide) configuration of a microstrip-transmission line. An FEM-based multiphysics solver is used for the evaluation of the spring constant, stress distribution, and pull-in voltage regarding the requirements of the switch-beam unit. The electromagnetic performance of the switch is investigated for a $675{\mu}m$ thick silicon substrate. For the operational frequency of 14.5 GHz, an insertion loss better than -0.3 dB, a return loss better than -40 dB, and input/output- and output-port isolations better than -35 dB are achieved for the switching unit.

• Journal of Sensor Science and Technology
• /
• v.18 no.4
• /
• pp.269-273
• /
• 2009

In this paper, a study on a portable hydrogen alarm system based on the palladium coated single mode fiber sensor has been reported. The fabricated hydrogen sensor exhibited 0.14 dB, 0.41 dB and 0.54 dB optical intensity variation when it was exposed by the nitrogen and hydrogen mixed gas containing 0.5 %, 1 % and 4 % of the hydrogen concentration, respectively. The fabricated sensor exhibited 20 second of response time and 120 second of recovery time for 4 % hydrogen containing gas. The fiber optics layout and software algorithm for detection of hydrogen leakage have been presented. The implanted portable hydrogen alarm system successfully generated an alarm signal when a 4 % hydrogen containing gas was leaked out.

• Transactions of the Society of Information Storage Systems
• /
• v.3 no.2
• /
• pp.54-58
• /
• 2007

Using metal/Si materials as a recording layer, we have achieved good results for a SR disc (super resolution disc). Mainly by controlling metal composition and the ratio of metal to Si of recording layer, signal qualities were greatly enhanced. At the mark length of 75nm, the best CNR (Carrier to Noise Ratio) was about 45dB. Write power was reduced down to about 6.5mW. LFN (Low Frequency Noise) could also be reduced down to 14dB. Single tone pattern jitters for every mark whose length is from 2T through 8T were achieved to be below 10%. The readout signal was stable sustaining CNR>40dB during about 15,000 times reading. The so-called "3T-problem" could be avoided.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1994.06a
• /
• pp.1070-1075
• /
• 1994

This paper describes the method for designing loudness ratings as transmission quality for ISDN telephone connected to fully digital network. To design the desirable loudness ratings for ISDN telephone, the model system of digital speech communication for subjective test is developed and opinion tests for establishing the optimal CODEC input level, the range of overall loudness rating, and sidetone masking rating are performed. As the results, the desirable ranges of loudness ratings are proposed as 6 to 8dB for sending, 0 to 2dB for receiving, and 10 to 14dB for sidetone masking rating.

• Proceedings of the Korea Contents Association Conference
• /
• 2016.05a
• /
• pp.13-14
• /
• 2016

LTE 대역인 2.5-2.68GHz에서 동작하는 버틀러 스위치를 설계하기 위해 버틀러 매트릭스의 구성요소인 3dB 하이브리드 커플러와 크로스오버를 다단 브랜치 선로의 구조로 구성하여 광대역 특성을 갖는 평면 구조의 버틀러 스위치를 설계하였다. 설계된 버틀러 스위치는 동작대역에서 23.9dB ~ 34.18dB의 좋은 반사손실 특성과 비교적 작은 $7.124^{\circ}$의 위상오차를 보였다.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.4
• /
• pp.1-10
• /
• 1993

This paper presents the designing/manufacturing scheme of the diplexer for satellite transponder which is composed of 2-channel bandpass filters, coupled with E-plane T-junction, having symmetrical waveguide E-plane step discontinuity structures. The 2-channel bandpass filters of the diplexer are designed by the scheme of connecting ${\lambda}_{g}$/2 shunt stub to the waveguide E-plane, playing the role of heat sinks without attaching a special heat sinks and to give the profitable productivity and allow the low-cost manufacturing at mass production, tuning screws are eliminated which have been used to compensate the operating characteristics of manufactured filters. The 2 channel bandpass filters of manufactured 14/12 GHz diplexer for domestic Ku-band satellite transponder have the return loss of 25 dB, insertion loss of 0.3 dB in passband, and below-50 dB of stopband characteristics (T$_{x}$ : f$_{o}{\pm}$250 MHz, R$_{x}$ : f$_{o}{\pm}$220 MHz) at room temperature.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2002.03a
• /
• pp.53-57
• /
• 2002

In this paper, we explain new EM(electromagnetic) wave absorber that mixed NC (Natural Ceramics) and Ferrite with NL(Natural Lacquer). At first, a mixed NC and Ferrite(NC : F = (0.1~30)wt% : (99.9~70)wt%) bum at 95$0^{\circ}C$~125$0^{\circ}C$. And then, it is comminuted and injected into NL((NC+F) . NL = (30~80)wt% (70~20)wt%), finally we made Ferrite-NL EM wave absorber. Generally, conventional labor Ferrite covers only 500 MHz to 10 GHz under tolerance limits of 2 to 6 dB in absorption, and Ferrite-NL is over 8 ~ 14 dB. However, NCFerrite-NL huts superior absorption ability. It is over 16 to 19 dB through 500 MHz to 10 GHz.