• Journal of the Korea Safety Management & Science
• /
• v.11 no.4
• /
• pp.161-168
• /
• 2009

Ubiquitous application is in need of high-level technology to meet various requests for ubiquitous service. In order to adopt ubiquitous technology in not only pilot projects but also regional services, many projects like u-City are implemented in and outside the country. RFID has been known as one of the important technology to provide with core benefits of Ubiquitous services. Because each band of RFID technology has merits and demerits concurrently, single-band RFID system has limitations for various RFID services. Thus, we developed dual-band RFID system enable to provide with 13.56MHz and 2.45GHz RFID service at the same time to compensate the shortage of single-band RFID system. Also we have considered the way that the firmware would control signals without collision, studied battery life and range for tag, and made hardware for dual-band RFID service.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1123-1126
• /
• 2003

In this paper, the emission properties of electrodeless fluorescent lamp were discussed using the inductively coupled plasma. To transmit the electromagnetic energy into the chamber, a RF power of 13.56MHz was applied to the antenna and considering the Ar gas pressure and the RF electric power change, the emission spectrum, Ar- I line, luminance were investigated. At this time the input parameter for ICP RF plama, Ar gas pressure and RF power were applied in the range of $10{\sim}60m$ Torr, $10{\sim}300W$ respectively.

• Korean Journal of Materials Research
• /
• v.4 no.2
• /
• pp.227-232
• /
• 1994

Diamondlike carbon thin film has been fabricated with low discharging frequency, 450KHz by plasma enhanced chemical vapor deposition. Its physical properties such as optical band gap, microhardness and internal stress have been compared with 13.56MHz film. Optical band gap of 450KHz DLC thin film was less than 13.56MHz film and it was found that C-H bond concentration and total hydrogen contents in the film decreased greatly as the result of FT-IR and CHN analysis. Also, when DLC thin film was fabricated with low discharging frequency, it was expected that the adhesion of the film to the substrate was improved by the great decrease of internal stress without any considerable decrease of microhardness.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.04a
• /
• pp.190-193
• /
• 2010

본 논문은 최근 전세계적으로 유통물류를 비롯한 산업 전반에 걸쳐 RFID(Radio Frequency Identification) 기술이 새로운 성장 동력으로 각광을 받고 있다. 유비쿼터스 시대에서 RFID는 빼놓을 수 없는 시스템 이다. RFID/USN 사업 추진시 공부하는 학생들이 RFID 시스템을 학습하기 위해서 자료를 구할 때는 비밀유지계약서를 체결해야 한다. RFID 시스템을 대부분 수입에 의존하고 있고, 기술 인력도 현재 부족하여 어려움을 겪고 있다. 이런 문제점을 보안하기 위하여 공부하는 학생들이 RFID 시스템을 쉽게 접근할 수 있도록 제작하였다. 여러 가지 규약에 의해 제안되었던 문제점을 해결하는데 의의가 있다. 별도의 RFID 전용칩을 사용하지 않고, 마이크로콘트롤러를 사용하여 저가격 RFID 학습 시스템을 구현하였다. 13.56MHz RFID 시스템의 ISO14443A 읽기/쓰기 방법에 대해 설명하고, HF 대역의 13.56MHz RFID 시스템의 구성에 대해서 소개한다. 구현한 RFID 시스템을 활용하여 응용 프로그램을 제작하여 실습을 진행하였다. RFID 시스템의 구조를 쉽게 이해하기 위하여 각각의 모듈로 분류하여 나누어 제작하였다. 태그의 EEPROM 메모리에 정보가 어떻게 저장 되는지를 학습할 수 있도록 C#을 사용하여 응용 프로그램을 설계 및 구현하여 실습하였다. 학습자가 RFID 시스템이 산업분야에서 어떻게 활용되는지 이해를 돕기 위하여 학생증 발급 시스템을 구현하였다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.10
• /
• pp.39-45
• /
• 2011

This paper proposes a low power current-steering 10-bit DAC selecting clock enable signal. The proposed DAC reduces the clock power by cutting the clock signal to the current-source cells in wihich the data will not be changed. The proposed DAC was implemented using a 0.13${\mu}m$ CMOS process with $V_{DD}=1.2V$. Its core area is 0.21$mm^2$. It consumes 4.46mW at 1MHz signal frequency and 200MHz sampling rate. The clock power is reduced to 30.9% and 36.2% of a conventional DAC at 1.25MHz and 10MHz signal frequencies, respectively. The measured SFDRs are 72.8dB and 56.1dB at 1MHz and 50MHz signal frequencies, respectively.

• Electronics and Telecommunications Trends
• /
• v.21 no.2 s.98
• /
• pp.161-169
• /
• 2006

IT 839 정책 중 하나인 RFID는 기업의 수요 예측, 생산, 재고, 유통의 관리, 상점에서의 제품 판매 방식을 변화시킨다는 비전을 제시하고 있다. 향후 그 시장 규모가 막대할것으로 전망되고 있다. 본 고에서는 IDTech사의 RFID 구축사례에 대한 심층분석을 통해 현재 실제 시장 현황을 살펴보았다. IDTech사의 RFID 구축 데이터베이스에 의해, RFID 구축사례가 가장 많은 국가는 미국으로 나와 있으며, 전세계적으로 RFID가 가장많이 적용 되 어진 분야는 소매 및 소비재 분야로 나타났다. 가장 많이 사용 되 어지는 주파수 대역은 HF(13.56MHz)였다. 태그의 형태로는 라벨이 가장 많은 비중을 차지하는것으로 나타났다. HF(13.56MHz)와 LF(125~135kHz) 방식은 모든 국가에서 활용되고 있으나 Microwave(2.45GHz)와 UHF(868~960MHz)의 비중도 상대적으로 높게나타났다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.4
• /
• pp.59-64
• /
• 2023

In this paper, It is proposed through the empirical design of a Conducted EMI filter for noise reduction of power used in electronic devices. For the proposed structure, A-type, B-type, C-type, and D-type structures were designed, and conductive noise reduction was confirmed by using an LC network with various X-capacitors, Y-capacitors, and Air-inductors. 10 [μH] was used for L1 and L2, and 4.7 [nF] was used for C1 and C2. L3 for common mode used 13[μH], and C5, C6, C7 were designed using 10[nF]. The measured insertion loss values of the designed EMI filter were -74.4[dB] at 3.2MHz, -75.4[dB] at 4MHz, and -75.3[dB] at 13.56MHz. Therefore, the proposed EMI filter will be able to reduce power supply noise used in various electronic devices.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.5
• /
• pp.519-527
• /
• 2010

In this paper, we proposed a 13.56 MHz wireless power transfer system using loop antennas with tunable impedance matching circuits. In general, a wireless power transfer system shows an impedance mismatching due to a reflected impedance, because a coupling coefficient is varied with respect to separation distance between two resonating antennas. The proposed system can compensate the effect of this impedance mismatch owing to tunable impedance matching circuits using varactor diodes. Therefore, transmission efficiency is enhanced, moreover, the center frequency of the system is not changed, regardless of separation distance between two antennas. In order to demonstrate the performance of the proposed system, a wireless power transfer system with tunable impedance matching circuits is designed and implemented, which has a pair of loop antennas with a dimension of $30\;cm{\times}30\;cm$ cm. The input return loss, coupling coefficient, efficiency, and input impedance variation with respect to a distance between loop antennas were measured. From measured results, the proposed system shows enhanced performances than the case of the general fixed $50\;{\Omega}$ impedance matching circuits. Therefore, we verified that the proposed wireless power transfer system using the proposed impedance matching scheme will be able to ensure robust operation even when the separation distance of antennas is varied.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.8
• /
• pp.805-808
• /
• 2011

This paper presents a design of high-efficiency and high-power class E power transmitter. The transmitter is composed of 300 Watt class E power amplifier and AC-DC converter. The AC-DC converter converts 220 V and 60 Hz AC to a 290 V DC. The generated DC voltage is directly applied to a bias of the class E power amplifier. Because the converter does not have DC-DC converter unit, it has very high conversion efficiency of about 98.03 %. To minimize the loss at the output of the power amplifier, high-Q inductor was implemented and deployed to the output resonant circuit. As a result, the 13.56 MHz class E power amplifier has a high power-added efficiency of 84.2 % at the peak output power of 323.6 W. The overall efficiency of class E power transmitter, including the AC-DC converter, is as high as 82.87 %.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.842-845
• /
• 2008

This paper propose a dormitory management system based on 13.56MHz RFID system. The proposed dormitory management system consists of three parts, the RFID hardware system the middleware, and the application. RFID hardware system uses 13.56MHz frequency which is suitable for a close range. The middleware is implemented to accept the RFID hardware system values using RS-232c communication method and forward the values to the application. The application is designed to make the DB using the forwarded values, and works based on the DB. The efficacy of the proposed dormitory management system is verified by means of experiments. In the experiments, we set up the system to the dormitory of Daeduk College to show the improvement results of proposed system.