• 한국콘텐츠학회논문지
• /
• 제7권1호
• /
• pp.184-189
• /
• 2007

우리나라는 도로교통사고로 인한 사회적 비용이 연간 약 15조원에 달하며 국내총생산(GDP)의 2.15%를 차지한다. 교통사고로 하루 평균 약 20명이 사망하고, 그 피해액의 규모가 약 70억원에 이른다. 구체적으로 2005년 7월에 나온 OECD 교통사고 국제비교(2003년 통계를 기준)에 따르면 우리나라는 해당 년도 1년 동안 7,212명이 교통사고로 사망했으며 이는 인구 10만명당 교통사고 사망자가 OECD 26개국 가운데 26위, 어린이 10만명당 교통사고 사망자는 25개국 가운데 25위, 노인 10만명당 교통사고 사망자는 25개국 가운데 25위 등으로 선진국의 경우와는 대조를 보이고 있다. 그동안 정부에서는 교통사고를 줄이기 위한 여러 가지 교통정책을 시행하였고 획기적인 진전이 있었으나 일반 국민들이 느끼는 교통안전에 대한 무관심은 턱없이 부족하다. 본 연구에서는 광주.전남지역에서 발생한 교통사고 현황을 전남지방경찰청의 자료를 이용하여 분석하고 적절한 교통안전대책을 제시하고자 한다.

• 한국안전학회지
• /
• 제26권1호
• /
• pp.43-48
• /
• 2011

Estimation of accident costs would set a sound criterion on which invest judgement for work improvement would be decided. Unfortunately, however, the professional agency and most companies in Korea still adopt the conventional cost estimation method based on Heinrich's theory would not be applicable any more since it was developed about a century ago. This research was carried out to confirm the validity of conventional accident cost estimation method. With 110 accident cases occurred in an autoglass manufacturing plant for last 7 years, post-accident treatment procedure was simplified as a model with several phases, and practical costs were analyzed case by case. The results showed that, as expected, the company should the largest portion of loss due to accidents, and that mean indirect cost were 10.10(${\pm}20.70$) times as much as direct cost estimated by conventional method. Therefore, finally, accident types and items influenced much on accidents costs were analyzed and discussed.

• 한국안전학회지
• /
• 제26권4호
• /
• pp.27-33
• /
• 2011

Forensic Engineering is the area covering the investigation of products, structures that fail to perform or do not function as intended, causing personal injury or damage to property. To investigate explosion accident of the centrifugal casting machine in terms of the forensic engineering, in this paper, the computing simulation using ADINA FSI has performed to investigate that the effect of the Check-Pin fracture by the flow phenomena and molten metal weight and the mechanical properties test of the accident Check-Pin has performed using the instrumented indentation technique. Through these studies, the safety accident that may occur in centrifugal casting machine can be minimized by performing specialized and systematic investigation of the accident cause in terms of the forensic engineering.

• 한국안전학회지
• /
• 제26권4호
• /
• pp.120-126
• /
• 2011

Under the current law or system, the range of traffic accident on the crosswalk does not reflect the characteristics of traffic accident and the pedestrian's walking pattern. Thus, this study conducted a video recording survey on the 250 spots which are high to traffic accident rate of pedestrian-vehicle to reset the range of traffic accident on or near the crosswalk considering the characteristics of traffic accident and the pedestrian's walking pattern. Based on the collected data through a video recording survey, this study analyzed the pattern of pedestrians and extracted the variables influenced in the pedestrian's walking pattern. After conducting the regression analysis, this study made the model of measuring the range of traffic accident on the crosswalk. Through all processes these, this study reset the range of traffic accident on the crosswalk which could minimize the disadvantages of pedestrian when they have an accident on the crosswalk and ensure the right of way of pedestrian.

• 대한토목학회논문집
• /
• 제26권1D호
• /
• pp.133-140
• /
• 2006

본 연구에서는 효율적인 철도안전관리를 위해 철도사고유형을 재분류하고 이를 표준화하기 위해 표준화된 코드(Code)를 제시하고 있다. 우선, 기존의 국내 외 철도사고유형을 세부적으로 분석하였다. 사례연구를 바탕으로 새로운 철도사고유형은 서로 중복되지 않게 9가지로 분류되었고 40개의 서로 다른 사고형태로 세분화 되었다. 이런 모든 형태는 9개의 사고대상과 6개의 사고위치와 연관된다. 따라서 새로운 철도사고유형을 표준화 하기위해 철도사고의 종류, 철도사고 형태, 철도사고 대상, 철도사고 위치의 4자리 코드 조합을 제시하였다. 또한 현재 사용되고 있는 철도사고DB를 본 연구에서 제안하고 있는 표준코드로 전환하여 사용할 수 있는 방안을 제시하였다. 이러한 코드(Code)는 철도사고 예방, 대비, 대응, 복구로 이루어진 철도안전관리체계구축에서 중요한 역할을 담당할 것이다.

• 한국안전학회지
• /
• 제26권6호
• /
• pp.118-123
• /
• 2011

This study deals with the traffic accidents of the arterial link sections. The purpose is to comparatively analyze the characteristics and models by accident type using the data of 24 arterial links in Cheongju. In pursuing the above, this study gives particular emphasis to modeling such the accidents as the side-right-angle collision, rear-end collision and side-swipe collision. The main results are the followings. First, six accident models are developed, which are all analyzed to be statistically significant. Second, the models are comparatively evaluated using the common and specific variables by accident type.

• 콘크리트학회지
• /
• 제11권3호
• /
• pp.26-36
• /
• 1999

• 대한안전경영과학회지
• /
• 제26권3호
• /
• pp.115-121
• /
• 2024

The forklift carry cargo and move to various places. When a forklift moves to various places, a forklift accident occurs due to a number of factors,such as speed, safe distance. Forklift accidents occur at the logistic site and there are many studies on the causes of accident such as jamming, falling, collisions, etc. However, safety operation for accident prevention is necessary before operating a forklift. Pre-accident safety precautions may prevent accidents. In this study, precautionary factors for safe operation were analyzed to prevent forklift safety accidents through the AHP technique. As a result of the study showed that safety management was the priority in the terminal group and the logistics warehouse group.

• 한국생산제조학회지
• /
• 제26권3호
• /
• pp.272-277
• /
• 2017

CCTV image processing techniques have been developed for safety management in manufacturing sites. However, CCTV growth has become a social problem for video surveillance with regard to privacy. This study aims to manage the safety system efficiently and protect privacy simultaneously. In this study, the CCTV monitoring system is composed of five steps (accident monitoring, detection, notification, management, restoration). De-identified image is observed when we are in a normal situation. De-identified image changes to identified image when it detects an accident. As soon as it detects an accident, the accident information is sent to the safety administrator. Then the administrator could conduct safety measures. Afterward, accumulated accident data could be used for statistical data that could be utilized as analyzing expecting accident.

• 한국안전학회지
• /
• 제26권3호
• /
• pp.8-14
• /
• 2011

The live-line works are very dangerous because of direct contacts with the distribution line or neighboring contacts. So the purpose of this study is to identify the risk factor by accident occurrence form and accident case analysis, and to suggest the quantified risk index by risk occurrence frequency and risk strength analysis. And the risk index assessment is researched by accident cases analysis on work type. Accident cases of transmission distribution line are researched based on data of the Ministry of Employment and Labor in the last ten-year period (2000~2009). In results of this paper, high risk isn't always a priority of safety measures. Risk occurrence frequency and risk strength have to be considered according to detail work types, work methods and conditions of field work. And safety management measures must be planned according to risk occurrence frequency and risk strength.