• Title/Summary/Keyword: 10 cm height

Search Result 2,615, Processing Time 0.029 seconds

Accuracy Analysis of GNSS-derived Orthometric Height in Mountainous Areas

  • Lee, Jisun;Kwon, Jay Hyoun;Lee, Hungkyu;Park, Jong Soo
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.36 no.5
    • /
    • pp.403-412
    • /
    • 2018
  • Recently, GNSS (Global Navigation Satellite System)-derived orthometric height determination has been studied to improve the time and cost-effectiveness of traditional leveling surveying. However, the accuracy of this new survey method was evaluated when unknown points are located lower than control points. In this study, the accuracy of GNSS-derived orthometric height was examined using TPs (Triangulation Points) to verify the stability of surveying in mountainous areas. The GNSS survey data were obtained from Mungyeong, Unbong/Hadong, Uljin, and Jangseong. Three unknown points were surrounded by more than three UCPs (Unified Control Points) or BMs (Benchmarks) following the guideline for applying GNSS-derived orthometric height determination. A newly developed national geoid model, KNGeoid17 (Korean National Geoid 2017), has been applied for determining the orthometric height. In comparison with the official orthometric heights of the TPs, the heights of the unknown points in Mungyeong and Unbong/Hadong differ by more than 20 cm. On the other hand, TPs in Uljin and Jangseong show 15-16 cm of local bias with respect to the official products. Since the precision of official orthometric heights of TPs is known to be about 10 cm, these errors exceed the limit of the precision. Therefore, the official products should be checked to offer more reliable results to surveyors. As an alternative method of verifying accuracy, three different GNSS post-processing software were applied, and the results from each software were compared. The results showed that the differences in the whole test areas did not exceed 5 cm. Therefore, it was concluded that the precision of the GNSS-derived orthometric height was less than 5 cm, even though the unknown points were higher than the control points.

Effect of Balustrade Heights and Blanket Types on Mechanism of Falling Accident during Shaking-Off the Dust of the Blanket from Balcony

  • Hyun, Seunghyun;Ryew, Checheong
    • International journal of advanced smart convergence
    • /
    • v.9 no.2
    • /
    • pp.38-48
    • /
    • 2020
  • The shaking-off the dust from balustrade of higher stories may cause the higher risk of falling accident rate. Main purpose of this study was to quantify an effect of balustrade heights and blanket types on possibility of falling accident relative to one's motor controllability during shaking-off the dust of the blanket from balcony. Female participants, who consisted of total 10 under condition of balustrade height of 3 kinds (90 cm, 110 cm, 130 cm) and blanket types (0.4 kg, 1.6 kg, 3 kg, 200230 cm), performed repetitively the task of shaking-off the dust of the blanket. Vertical position and velocity of center of mass due to increase of blanket weigh in case of balustrade height of 90 cm was increased, but vertical ground reaction force was decreased swiftly. That is, the higher balustrade height was, the less distance difference between center of mass and center of pressure was.

A Comparative Analysis on Changes of Foot Pressure by Shoe Heel Height during Walking (하이힐 굽 높이에 따른 보행 시 족저압 변화 비교 분석)

  • Park, Jong-Jin
    • Korean Journal of Applied Biomechanics
    • /
    • v.19 no.4
    • /
    • pp.771-778
    • /
    • 2009
  • We aimed to determine the effect of heel height on foot pressure by comparing and analyzing data on foot pressure in shoes with different heel heights. Qn the basis of a previous study, we selected 3cm and 7cm as the shoe heel heights preferred by female college students. We divided 10 female students into forefoot and hindfoot to measure vertical force, maximum pressure, and average pressure. The average pressure on the forefoot was higher and that on the hindfoot was lower in the case of 7cm high-heeled shoes. The maximum pressure on the forefoot was significantly higher in the case of the 7cm heel height (p<.05). The vertical force, maximum pressure, and average pressure on the hindfoot were also significantly higher in the case of the 7cm heel height (p<.05). The results showed that wearing 7cm high-heeled shoes exerted greater maximum pressure on the forefoot and greater vertical force, maximum pressure, and average pressure on the Hndfoot. This leads to increase in confining pressure caused by high pressure distribution over the forefoot and increase in the pressure on the hindfoot, which may cause deformation of toes and heel pain over a long period. Therefore, female college students who wish to wear high heels are recommended to wear 3cm high-heeled shoes rather than 7cm high-heeled shoes.

A Study on Stand Structure and Growth Characteristics of Korean White Pine (Pinus koraiensis) in North Central Region of Gangwon Province (강원 중ㆍ북부 지역의 잣나무 임분구조 및 생장특성)

  • Lee, Daesung;Choi, Jungkee
    • Journal of Forest and Environmental Science
    • /
    • v.30 no.1
    • /
    • pp.101-106
    • /
    • 2014
  • The purpose of this research was to figure out the stand structure and growth characteristic with relation to DBH, height, and volume in sixteen Pinus koraiensis plantations of Gangwon province region. Age class was diversely distributed from age class II (16 yr) to age class VIII (77 yr), and, in terms of site index, sixteen regions were superior: nine regions 'high', seven regions 'middle'. The distribution of DBH by sites appeared a bell-shaped curve, and the number of trees was the most in diameter section of 18-22 cm. The dispersion of DBH was various with age and widest ranging from 18 cm to 58 cm in age class VII-VIII. The distribution of height was also a bell-shaped curve with the smaller deviation than the distribution of DBH, and most of trees were in height section of 14-18 m. The correlation of DBH and height was high (r=0.75), and the volume bigger than 1.0 $m^3$ was presented from DBH 35 cm, height 20 m.

The Effect of Visual & Cognitive Information of Landing Height on Landing Strategy during Drop Landing (드롭랜딩 시 낙하높이에 대한 시각 및 인지 정보가 착지 전략에 미치는 영향)

  • Eun, Seon-Deok;Yang, Jong-Hyun;Kim, Yong-Woon;Kang, Myeong-Soo;Kwak, Chang-Soo
    • Korean Journal of Applied Biomechanics
    • /
    • v.22 no.4
    • /
    • pp.405-411
    • /
    • 2012
  • The purpose of this study was to determine the effects of landing height information on landing strategy during a drop landing. Ten healthy male subjects(age: $22.1{\pm}1.9year$, height: $178.4{\pm}7.8cm$, mass: $75.3{\pm}9.4kg$) participated in this study. Each participant was asked to jump with both legs off a 40 cm high box on one of the three plates with different thickness (0 cm, 13 cm, 26 cm). In the first condition, subjects were given both cognitive and visual information about the jumping heights. In the second, they were given only cognitive information without visual one, and in the third, no information about the height was provided to subjects. (Only the data collected from the 40 cm height landing were analyzed and reported in the present study.) The results showed that landing strategies during a double-leg drop landing from 40 cm height were not significantly affected by visual and cognitive information blockages. Also, there were no statistically significant differences in landing strategies between the three conditions even though the mean differences attained in this study seemed to warrant further studies investigating the relationship between landing strategies and cognitive information.

Effect of Lighting Condition of Eco Energy LED on Growth and Flowering Quality of 'Viking' Rose (친환경에너지 LED 광 조건에 따른 '바이킹' 장미의 생장과 개화품질에 미치는 영향)

  • Han, Tae-Ho;Ahn, Young-Sang;Choi, Hyun-Sug
    • Korean Journal of Organic Agriculture
    • /
    • v.24 no.1
    • /
    • pp.99-114
    • /
    • 2016
  • This study was conducted to evaluate effects of various eco light sources with various lighting distance in 'Viking' rose (Rosa spp.) on the growth and flowering quality to be applied for farm sites. Treatment included 10-, 20-, and 30-RL (-BL, -RBL, -FL, and -IL), which referred to red LED (blue LED, red+blue LED, fluorescent, and incandescent) lighting at 10 cm, 20 cm, 30 cm respectively, apart from flowers. NL referred to natural light as a control. Growth and flowering of 'Viking' rose were non-destructively measured at 4, 6, and 8 weeks after treatment (WAT). FL treatment increased plant height at 4, 6, and 8 WAT, regardless of lighting distance, with the shortest height observed for the NL-treated flowers. 30 RL treatment also increased plant height at 6 and 8 WAT. Stem diameter and number of leaves were not significantly different for all the treatments at 8 WAT, with the lowest values observed for RBL treated-flowers among the light source treatments. Number of root was the greatest for the 30 BL-treated flowers (10.0) but the fewest for the 30 FL (4.7). Length of flower neck at 6 WAT was the extended by 6~7 cm in the 10 FL and 20 FL treatments as well as by 5~6 cm in the 20 RL and 30 RL treatments, inducing 100% of flowering. NL increased $a^*$ (29) of flower color, with the lowest value (10) observed for 20 RL. All things considered, 30 RL would be the best interaction treatment of source and distance of eco light to improve plant height and flowering quality of 'Viking' rose.

A Height Simulation on Storm Surges in Jeju Island (제주도 연안해역의 폭풍해일고 산정)

  • Yang, Sung-Kee;Kim, Sang-Bong
    • Journal of Environmental Science International
    • /
    • v.23 no.3
    • /
    • pp.459-472
    • /
    • 2014
  • Storm surge height in the coastal area of Jeju Island was examined using the Princeton Ocean Model(POM) with a sigma coordinate system. Amongst the typhoons that had affected to Jeju Island for six years(1987 to 2003), the eight typhoons(Maemi, Rusa, Prapiroon, Olga, Yanni, Janis, Gladys and Thelma) were found to bring relatively huge damage. The storm surge height of these typhoons simulated in Jeju harbour and Seogwipo harbour corresponded relatively well with the observed value. The occurrence time of the storm surge height was different, but mostly, it was a little later than the observed time. Jeju harbour showed a higher storm surge height than Seogwipo harbour, and the storm surge height didn't exceed 1m in both of Jeju harbour and Seogwipo harbour. Maemi out of the eight typhoons showed the maximum storm surge height(77.97 cm) in Jeju harbour, and Janis showed the lowest storm surge height(5.3 cm) in Seogwipo harbour.

Effects of Mecoprop Wettable Powder Concentrations on Growth and Yield of Flax

  • Kwon, Byung-Sun
    • Plant Resources
    • /
    • v.7 no.1
    • /
    • pp.15-21
    • /
    • 2004
  • This study was conducted to evaluate the effect of mecoprop-wp concentrations on weed control, growth characters and yield in flax, after 7cm and 14cm of plant height it to the field. The major weeds were Alopecurus aequalis var. a murensis (kom) ohwi, Persicaria hydropiper spach, Lamium amplexicaule L, Stellaria alsine Grimm var. undulata ohwi, Eleusine indica(L.) Gaertn. Flax yield were increased somewhat more with 250g/10a mecoprop-wp at 7cm of plant height than the other treatment and by hand weeding treatment of mecoprop-wp, 250g/10a at 7cm of plant height was slightly harmful for the flax with recommended concentration, On the other hand, all treatments were harmful in the double dosage level.

  • PDF

Effect of Initial Seedling Size and Root Pruning Intensity on Above-ground and Root Development in Quercus serrata Seedlings after Transplanting (초기 묘목크기와 단근강도가 이식 후 졸참나무의 지상부 및 뿌리발달에 미치는 영향)

  • Na, Sung-Joon;Kim, In-Sik;Lee, Do-Hyung;Lee, Wi-Young
    • Korean Journal of Plant Resources
    • /
    • v.26 no.4
    • /
    • pp.503-510
    • /
    • 2013
  • This study was conducted to determine the optimum intensity of root pruning and the initial seedling size of 1-year-old Quercus serrata for producing 2-year-old healthy seedlings. Large( > 26 cm hight) and small size ( < 24 cm hight) seedlings were pruned their root by the length of 5, 10, and 15cm and then transplanted on nursery. Stem height, root-collar diameter(RCD), height to RCD ratio(H/D ratio), shoot dry weight(DW) and root development were measured during first growing season after transplanting. Seedling size and pruning intensity influenced on shoot growth such as height, RCD, H/D ratio and DW after transplanting. In addition, the development of lateral roots such as number, length, DW and diameter were affected by the seedling size. Taproot pruned by 15cm was shown excellent above-ground growth in large seedling group, but pruned by 10 and 15cm showed respectively better shoot growth in small seedling group. Large seedlings increased their above-ground growth, taproot regrowth, and number of lateral roots more than those of the small seedlings. But the length and DW of lateral roots were increased in the small seedlings. In conclusion, in order to produce high quality 2-year-old seedlings, it is important to produce large size of Q. serrata seedlings. Also root pruning length of 1-year-old Q. serrata was reasonable on 15 cm in taller than 26 cm or 10cm in less than the height.

Yield and Chemical Composition of Cassava Foliage and Tuber Yield as Influenced by Harvesting Height and Cutting Interval

  • Khang, Duong Nguyen;Wiktorsson, Hans;Preston, Thomas R.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.18 no.7
    • /
    • pp.1029-1035
    • /
    • 2005
  • A 3${\times}$4 factorial field experiment with a complete randomised split-plot design with four replicates was conducted from June 2002 to March 2003 at the experimental farm of the Nong Lam University, Ho Chi Minh City, Vietnam, to determine effects of different harvesting heights (10, 30 and 50 cm above the ground) and cutting intervals (45, 60, 90 and 285 days) on yield of foliage and tubers, and chemical composition of the foliage. Cassava of the variety KM 94 grown in plots of 5 m${\times}$10 m at a planting distance of 30 cm${\times}$50 cm was hand-harvested according to respective treatments, starting 105 days after planting. Foliage from the control treatment (285 days) and all tubers were only harvested at the final harvest 285 days after planting. Dry matter and crude protein foliage yields increased in all treatments compared to the control. Mean foliage dry matter (DM) and crude protein (CP) yields were 4.57, 3.53, 2.49, and 0.64 tonnes DM $ha^{-1}$ and 939, 684, 495 and 123 kg CP $ha^{-1}$ with 45, 60, 90 and 285 day cutting intervals, respectively. At harvesting heights of 10, 30 and 50 cm the DM yields were 4.27, 3.67 and 2.65 tonnes $ha^{-1}$ and the CP yields were 810, 745 and 564 kg $ha^{-1}$, respectively. The leaf DM proportion was high, ranging from 47 to 65%. The proportion of leaf and petiole increased and the stem decreased with increasing harvesting heights and decreasing cutting intervals. Crude protein content in cassava foliage ranged from 17.7 to 22.6% and was affected by harvesting height and cutting interval. The ADF and NDF contents of foliage varied between 22.6 and 30.2%, and 34.2 and 41.2% of DM, respectively. The fresh tuber yield in the control treatment was 34.5 tonnes $ha^{-1}$. Cutting interval and harvesting height had significant negative effects on tuber yield. The most extreme effect was for the frequent foliage harvesting at 10 cm harvesting height, which reduced the tuber yield by 72%, while the 90 day cutting intervals and 50 cm harvesting height only reduced the yield by 7%. The mean fresh tuber yield decreased by 56, 45 and 27% in total when the foliage was harvested at 45, 60 and 90 day cutting intervals, respectively. It is concluded that the clear effects on quantity and quality of foliage and the effect on tuber yield allow alternative foliage harvesting principles depending on the need of fodder for animals, value of tubers and harvesting cost. An initial foliage harvest 105 days after planting and later harvests with 90 days intervals at 50 cm harvesting height increased the foliage DM and CP yield threefold, but showed only marginal negative effect on tuber yield.