• Korean Journal of Applied Biomechanics
• /
• v.16 no.3
• /
• pp.105-115
• /
• 2006

The purpose of this study is to elucidate the mechanical characteristics of lower extremity joint movements at different walking speeds in obese people and suggest the very suitable exercise for obese person's own body weight and basic data for clinical application leading to medical treatment of obesity. This experimental subjects are all males between the ages of 20 and 30, who are classified into two groups according to Body Mass Index(BMI): one group is 15 people with normal body weight and the other 15 obese people. Walking speed is analysed at 3 different speeds ($1.5^m/s$, $1.8^m/s$, $2.1^m/s$) which is increased by $0.3^m/s$ from the standard speed of $1.5^m/s$. We calculated joint moments of lower extremity during stance phase through video recording and platform force measurement.Two-way ANOVA(Analysis of Variance, Mix) is applied to get the difference of moments according to walking speeds between normal and obese groups. Pearson's Correlation Analysis is applied to look into correlation between walking speeds and joint moments in both groups. Significance level of each experiment is set as ${\alpha}=.05$. As walking speed increases maximum ankle plantar flexion moment in the stance phase is smaller in obese group than in normal group, which is suggestive of weak toe push-off during terminal stance in obese group, and the highest maximum ankle plantar flexion moment in obese group during the middle speed walking($1.8^m/s.$). Maximum ankle dorsal flexion moment in obese group is relatively higher than in normal group and this is regarded as a kind of compensatory mechanism to decrease the impact on ankle when heel contacts the floor. Maximum knee flexion and extension moments are both higher in normal group with an increase tendency proportional to walking speed and maximum hip flexion and extension moments higher in obese group. In summary, maximum ankle plantar flexion moment between groups(p<.025), maximum knee moment not in flexion but in extension(p<.001) within each group according to increasing walking speed, and maximum hip flexion and extension moment(p<.001 and p<.004, respectively according to increasing walking speed are statistically significant but knee and hip moments between groups are not. Pearson correlation are different: high correlation coefficients in maximum knee flexion and extension moments, in maximum hip extension moment but not hip flexion, and in maximum ankle dorsal flexion moment but not ankle plantar flexion, in each group. We suspect that equilibrium imbalance develops when the subject increases walking speed and the time is around which he takes his foot off the floor.

• Bulletin of the Korean Space Science Society
• /
• 2004.04a
• /
• pp.67-67
• /
• 2004

KOMPSAT-2 위성에서 사용되는 torque-rod에 각 유닛의 magnetic field가 어떤 영향을 미치는 지 분석하기 위해 유닛의 magnetic moment 값이 이용된다. KOMPSAT-2의 각 전장품들의 magnetic moment 값은 기존 KOMPSAT-1의 값에 의존하여 결정되었다 이것은 KOMPSAT-2는 KOMPSAT-1의 heritage를 따라 설계되었으며 각 전장품 역시 KOMPSAT-1의 전장품 설계를 대부분 따르고 있기 때문이다. (중략)

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.1
• /
• pp.33-38
• /
• 2016

The turbocharger is an essential component to realize the engine down-sizing. The moment of inertia of turbocharger rotor is an important parameter with respect to acceleration performance of the vehicle. It can be calculated from the CAD software based the geometry data and the material properties. But the accurate value of the inertia of turbocharger rotor must be measured through the experimental method. In this study, the measurement of moment of inertia of turbocharger rotor for 2.0 L spark-ignition engine was carried out. First, an experimental equipment using a trifilar method was designed and fabricated. Some optical devices, that is, photo sensor, counter, convex lens, etc, were used to increase the accuracy of the measurement. Second, error sensitivity for the equipment was analyzed. The error of period time and the radius can give big affects to the accuracy of the moment of inertia. When the amount of error of these two were each 1.0 %, maximum error of the moment of inertia was under 3.0 %. Third, the calibration for the equipment was performed using a calibration rotor which has similar shape to turbine rotor but simple. Calculated value from CAD software and measured one for the calibration rotor were compared. The total error of the equipment and the measurement is about 1.3 %. This result shows that the equipment can give the good result with resonable accuracy. Finally the moment of inertia of the turbine rotor and compressor wheel were measured. The coefficient of variations, the ratio of standard deviation to mean value, were reasonably small at 0.57 % and 0.73 % respectively. Therefore this equipment is suitable for the measurement of the moment of inertia of the turbine rotor and compressor wheel.

• Journal of Korea Water Resources Association
• /
• v.36 no.2
• /
• pp.183-193
• /
• 2003

A relation between the temporal variation of rainfall and direct runoff was characterized using temporal indexes of rainfall(1st, 2nd, 3rd, and 4th moment). Curve Number has a relation with 1st and 2nd moment for AMCIII condition when the rainfall duration is relative (10th quantile). Also peak runoff ratio(QP/Q) has a relation with 1st and End moment for AMCIII condition as well as 3rd and 4th moment for AMC I condition. Considering all durations of rainfall, alternatively, Curve Number has a relation with 1st and 2nd moment for AMCIIIcondition besides every moments for AMC I condition. But peak runoff ratio(QP/Q) has few relations excepting 3rd and 4th moment for AMC I condition. As a results, temporal indexes of rainfall are useful to determine curve numbers regarding the temporal variation of rainfall.

• Journal of Magnetics
• /
• v.1 no.2
• /
• pp.55-56
• /
• 1996

The effective magnetic moment of Cr$_2$O$_3$is determined by assuming that a proportional relation holds between its moment and the effective magnetic moment of hematite determined by the previous derived relaxation expression and the moments of Fe3+ ion and Cr3+ ion. The result obtained from the relation is found to be given by 0.10 in Bohr magneton which is in good agreement with the value obtained by use of the expression.

• Journal of the Korean Statistical Society
• /
• v.25 no.3
• /
• pp.393-406
• /
• 1996

We obtain the general moment of non-central Wishart distribu-tion, using the J-th moment of a matrix quadratic form and the 2J-th moment of the matrix normal distribution. As an example, the second moment and kurtosis of non-central Wishart distribution are also investigated.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.265-266
• /
• 2009

• Journal of applied mathematics & informatics
• /
• v.12 no.1_2
• /
• pp.323-334
• /
• 2003

We review the developmental history of the moment matrix of matrix quadratic form. This paper also investigates, the moment matrix of (non-central) Wishart distribution, which is multi-version of X$^2$ distribution.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.2
• /
• pp.1-9
• /
• 2001

To measure springback ratio of thin sheet or plate, winding bend rig is made. It bends a specimen with keeping its curva-ture constant and measure the bending angles before and after release of bending load. To check the performance of the bend rig, we calculated the bending moment by two ways which are based on simple beam theory. One is that the bending moment is calculated by using the results of bending test, and the other is that the moment is calculated by using the results of tensile tests. The former may entails the effect of the other is that the moment is calculated by using the results of tensile tests. The former may entails the effect of the friction between bending pin of the rig and surface of specimen, but the latter does not contain any effects of the friction since the bending moment is obtained by using tensile tests. Never-theless, the values of the two bending moments shows the same level of bending moment, which implies that the friction does not influence on the presence of friction within the scope of the test performed in this experiment. This phenomenon is explained theoretically by using moment equilibrium.

• Journal of Engineering Education Research
• /
• v.23 no.3
• /
• pp.32-40
• /
• 2020

A new moment of inertia experiment apparatus different from the existing one has been developed, which does not require deformation of a sample in order to fix it to the apparatus. This new experiment apparatus was able to experiment with constant-shaped objects that did not deform the samples, so that it enabled them for conducting an experiment which is close to an ideal rigid model dealt in the general physics course. The new experimental apparatus was easy and accurate in measuring the physical quantity by using the experimental principle of physical pendulum. In the results of the measurement of the moments of inertia of the six samples, all measurements were made to be accurate enough to measure with very small errors within 1%. In addition, it has been found to be useful as an experiment apparatus to understand the concept of the moment of inertia and to prove the formula for moment of inertia. Therefore, if the new moment of inertia experiment apparatus developed in this study is used in students' experiments, it is expected that students will be able to greatly increase their understanding of the concept of moment of inertia.