• Bulletin of the Korean Chemical Society
• /
• v.30 no.7
• /
• pp.1516-1520
• /
• 2009

A sensitive technique for the determination of trace Co(II) in various samples after column preconcentration by adsorbing onto silica gel loaded with 1-nitroso-2-naphthol was developed. Several experimental conditions, such as pH of sample solution, the amount of silica gel loaded with 1-nitroso-2-naphthol, the flow rate for adsorption and so forth, were optimized. The interfering effects of diverse concomitant ions were investigated. Fe(III) interfered with more than any other ions, but the interference by Fe(III) was completely eliminated by adjusting the amount of silica gel loaded with 1-nitroso-2-naphthol to 0.30 g. The dynamic range, the correlation coefficient ($R^2$), and the detection limit obtained by the proposed technique were 3.0-140.0 ng m$L^{-1}$, 0.9942, and 1.81 ng m$L^{-1}$, respectively. For validating the technique, the aqueous samples (tap water, reservoir water, stream water, and wastewater) and the plastic samples were used as real samples. Recovery yields of 93.0-107.0% were obtained. These measured data were not different from ICP-MS data at the 95% confidence level by F test. Based on the results of the experiment, it has been found that the proposed technique can be applied to the determination of Co(II) in various real samples.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.11
• /
• pp.1705-1707
• /
• 2003

• Journal of the Korean Chemical Society
• /
• v.43 no.6
• /
• pp.644-650
• /
• 1999

Trace amount of cobalt in water samples was preconcentrated continuously with an organic precipitant and determined by flame atomic absorption spectrometry. The flow injection technique was used to preconcentrate cobalt by on-line direct precipitation with 1-nitroso-2-naphthol. The precipitation was dissolved with methyl isobutyl ketone (MlBK) and was sent to the flame. The optimum conditions for cobalt determination were determined and used to analyze Co samples. For 1.0 mL of sample, the enrichment factor was 13 and the sample throughput was about lO per hour for 0.5 ppm Co solution. The enrichment factor was increased to 68 fold for 10.0 mL. A semi-reference biologicaI sample was prepared and analyzed. The result was in good agreement with the expected value with RSD of 4%.

• YAKHAK HOEJI
• /
• v.47 no.6
• /
• pp.356-360
• /
• 2003

Nitroso-2-naphthol-3,6-disulfonic acid, disodium salt (NRS) was used as an organic ligand to prepare basic drug-selective polymeric membrane electrode. The sensing membrane of the electrode consited of basic drug-meta1(II)-NRS as an ion-exchanger site in a poly(vinyl chloride) matrix plasticized with 2-nitrophenyl octyl ether (NPOE). The metal ions used were Fe$^{2+}$, Co$^{2+}$, Ni$^{2+}$ and Cu$^{2+}$. The electrodes exhibited fast and wide linear response in the basic drug concentration of 10$^{-5}$ ∼10$^{-3}$ mol/l with a response slope of 50∼60 mV/decade in a buffer solution of pH 4∼8. The electrodes exhibited good selectivity for many basic compounds.mpounds.

• BMB Reports
• /
• v.32 no.4
• /
• pp.321-325
• /
• 1999

NAD(P)H-quinone oxidoreductase (EC 1. 6. 99. 2) was purified form S. cerevisiae. The enzyme readily reduced 2,6-dichlorophenolindophenol, a quinonoid redox dye, as well as substituted benzo- and naphthoquinones, and could accept electrons from either NADH or NADPH. The purified NAD(P)H-quinone oxidoreductase turned out to be capable of reducing nitrosoarenes as well as a variety of quinones. A chemical-trapping technique using 4-chloro-1-naphthol was used to show that the N,N-dimethyl-p-benzoquinonediiminium cation was produced in the reduction of 4-nitroso-N,N-dimethylaniline catalyzed by NAD(P)H-quinone oxidoreductase.

• Textile Coloration and Finishing
• /
• v.8 no.1
• /
• pp.73-82
• /
• 1996

The photochromic dye(spiroxazine, Blue) as a susceptible material was synthesized by condensing 1-nitroso-$\beta$-naphthol with indoline. The melting point of the synthesized spiroxazine dye was 254$^{\circ}C$. Irradiation with ultraviolet light had effect on reversible coloration reaction. The photochromic dye microcapsules were produced by in situ polymerization using urea-formaldehyde prepolymer. The average diameter of the microcapsule was 2.94$\mu$m. The dyeability and washing fastness of the photochromic microcapsule fibers were increased by the pretreatment of cationic agent.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.5 s.118
• /
• pp.1-8
• /
• 2006

This study was performed to evaluate extensive electrochemical characteristics of 23 commercially available mediators for laccase. Electrochemical properties, interactions with laccases, and ability to degrade lignin were compared for selected mediators. Among them, NNDS has very similar electrochemical properties in terms of reversibility and redox potential (about 470 mV vs. Ag/AgCl at pH=7) compared to ABTS which is a well-known mediator. Specific activity of purified laccase from Cerrena unicolor was determined by both 2,2'-azino-bis-(3-ethylbenz-thiazoline-6-sulfonic acid) (ABTS) and 1-nitroso-2-naphthol -3,6-disulfonic acid (NNDS). The specific activity of the laccase was 23.2 units/mg with ABTS and 21.2 units/mg with NNDS. The electron exchange rate for NNDS with laccase was very similar to that for ABTS, which meant that NNDS had similar mediating capability to ABTS. Determining methanol concentration after reacting with laccase compared to lignin degradation capabilities of both ARTS and NNDS. ARTS or NNDS alone cannot degrade lignin, but in the presence of laccase enhanced the rate of lignin degradation. ABTS showed better activity in the beginning, and the reaction rate of NNDS with lignin was about a half of that of ABTS at 10 minute, but the final concentration of methanol produced in 1 hour was very similar each other. The reason for similar methanol concentration for both ABTS and NNDS can be interpreted as the initial activity of ABTS was better than that of NNDS, but ABTS would be inhibited laccase activity more during the incubation.