• International Journal of High-Rise Buildings
• /
• v.13 no.1
• /
• pp.57-67
• /
• 2024

With the requirement of high quality and three-dimensional urban development, the public space areas city-center rail transit stations is expanded from the plots defined by the road network density to the plots defined by the three-dimensional public space density, covering the internal and external paths of the plots, which brings about the resilient pattern of plot utilization. This paper uses the isochronous three-dimensional influence realm model around the station areas to quantitatively analyze and compare the surrounding three-dimensional path density of public space, and initially proposes flexible use patterns of differently scaled plots under the multi-scale plots linkage, to effectively promote the overall accessibility of the station realm space.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.3
• /
• pp.565-572
• /
• 1994

Consolidation behavior on soft clay was investigated by using one- and two-dimensional analysis based on original and modified one dimensional consolidation theory. For the analytical model, the embankment was simulated by applying single- or multi-surcharge loading to the surface of soft clay. Based on the results obtained, it was found that the predicted settlement by one dimensional consolidation theory was most of the time higher than the observed one at the mid- and especially lateral-zone of embankment. When compared with two dimensional analysis, the result of modified one dimensional consolidation analysis showed almost similar trend to the observed one. There fore even in case where proper selection of soil parameters, one dimensional consolidation theory like as modified one dimensional consolidation theory could be suggested due to its convenience.

• Korean Journal of Remote Sensing
• /
• v.16 no.4
• /
• pp.339-345
• /
• 2000

KOMPSAT-1 was launched on 21 December, 1999 and the main mission of the satellite is the cartography to provide the imagery from a remote earth view for the production of maps of Korean territory. For this purpose, the satellite has capability to tilt the spacecraft utmost $\pm$45 degrees to acquire stereo satellite imagery in different paths. This study aims to estimate the three dimensional positioning accuracy of stereo satellite imagery from EOC(electro-optical camera), a payload of KOMPSAT-1 satellite. For this purpose, the ground control points and check points were obtained by GPS surveying. The sensor modeling and the adjustment was performed by PCI software installed in KARI (Korea Aerospace Research Institute), which contained mathematical analysis module for KOMPSAT-1 EOC. The study areas were Taejon and Nonsan, placed in the middle part of Korea. As a result of this study, we found that the RMSE(root mean square error) value of three dimensional positioning KOMPST-1 stereo imagery can be less than 1 pixel (6.6 m) if we can use about 10 GCPs(ground control points). Then, a standarrd of FGDC (Federal Geographic Data Committee) of USA was applied to the result to estimate the three dimensional positioning accuracy of KOMPSAT-1 stereo imagery.

• Journal of Yeungnam Medical Science
• /
• v.18 no.1
• /
• pp.123-137
• /
• 2001

Background: The purpose of this study is to evaluate the accuracy of measurements obtained from 3-dimensional computerized tomography and 3-dimensional cephalogram constructed by using the frontal and lateral cephalogram of six human dry skulls. Materials and Methods: After CT scans and each cephalograms were taken, 3-dimensional coordinates (X, Y, Z) of landmarks were obtained using computer programs. In this study, the accuracy of both methods were determined by means of 14 linear measurements compare with caliper measurements. Results: The standard deviation of landmarks of 3-dimensional CT and 3-dimensional cephalogram were 0.23 mm, and 0.30 mm in X axis, 0.27 mm and 0.25 mm in Y axis, and 0.27 mm and 0.31 mm in Z axis. In both methods, the standard deviation were less than 0.5 mm in all landmarks, and the most of landmarks showed less than 1 mm in range. Concerning the accuracy, the mean difference between 3-dimensional CT and manual measurements was 0.33 mm, and 1.13 mm between 3-dimensional cephalogram and manual measurements. The distance between RGo and LGo showed the largest difference (2.03 mm). There were highly significant, and large correlation with manual measurements in both methods (p<0.01). Conclusion: It is concluded that closeness of repeated measures to each skulls reveal the precision of both methods. Computerized tomography and cephalogram for 3-dimensional measurement of maxillofacial structure are equivalent in quality to caliper measurements.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.3
• /
• pp.9-17
• /
• 2020

In this paper, as part of the research for the infrastructure of very high flexible and reconfigurable data center using very high speed crossbar switches, we developed a simulator that can model two and three dimensional connection structure of switches with an efficient control algorithm using software defined network and verified the functions and analyzed the performance accordingly. The simulator consists of a control module and a switch module that was coded using Python language based on the Mininet and Ryu Openflow frameworks. The control module dynamically controls the operation of switching cells using a shortest multipath algorithm to calculate efficient paths adaptively between configurable computing resources. Performance analysis by using the simulator shows that the three-dimensional switch architecture can accommodate more hosts per port and has about 1.5 times more successful 1:n connections per port with the same number of switches than the two-dimensional architecture. Also simulation results show that connection length in a 3-dimensional way is shorter than that of 2-dimensional way and the unused switch ratio in a 3-dimensional case is lower than that of 2-dimensional cases.

• Journal of computational fluids engineering
• /
• v.10 no.4 s.31
• /
• pp.51-58
• /
• 2005

The unsteady supersonic flow over two- and three-dimensional cavities has been analyzed by the integration of unsteady Reynolds-Averaged Navier-Stokes(RANS) with the k-$\omega$ turbulence model. The unsteady flow is characterized by the periodicity due to the mutual relation between the shear layer and the internal flow in the cavity. An explicit 4th order Runge-Kutta scheme and an upwind TVD scheme based on the flux vector split with the van Leer limiters are used for time and space discritizations, respectively. The cavity has a L/D ratio of 3 for two-dimensional case, and same L/D and W/D ratio of I for three-dimensional case. The Mach and Reynolds numbers are 1.5 and 450000 respectively. In the three-dimensional flow, the field is observed to oscillate in the 'shear layer mode' with a feedback mechanism that follows Rossiter's formula. In the two-dimensional simulation, the self-sustained oscillating flow has more violent fluctuation inside the cavity. The primary fluctuating frequencies of two- and three- dimensional flow agree very well with the 2nd mode of Rossiter's frequency. In the three-dimensional flow, the 1st mode of frequency could be seen.

• Fashion & Textile Research Journal
• /
• v.21 no.1
• /
• pp.104-111
• /
• 2019

This study was developed using the DTP (digital textile printing) jacquard fabrics with a three-dimensional pattern for bag and evaluated the preference and emotional structure. The following conclusions were obtained. Three-dimensional patterns of 12 species using the illustrator program, including six kinds of designs based on the text and six kinds of character types based on the geometry of the basic design was developed. As a result of evaluating the preference of the three-dimensional pattern jacquard fabric, the most preferred fabric was a three-dimensional patterned jacquard fabric with a motif of the Korean consonant "ㅅ". The results of analyzing the emotional dimension of the three-dimensional pattern jacquard fabric, eight factors including simple image, feminine image, exotic image, graphic image, sporty image, masculine image, dynamic image and stereoscopic image were derived. Between emotional factors and preferences correlation analysis showed the stronger the simple image, the feminine image, and the sporty image, the more preferable. It suggested the possibility of a morphological and new fabric for bag, textile design motifs by using Hangul consonants attempt to limit the flatness of the existing geometric form patterns that can be applied to three-dimensional bag whether swirly patterns overcome.

• Interaction and multiscale mechanics
• /
• v.3 no.1
• /
• pp.1-22
• /
• 2010

In this paper one introduces a method of multiscale modelling called collection of dynamical systems with dimensional reduction. The method is suggested to be an appropriate approach to theoretical modelling of phenomena in mechanics of materials having in mind especially dynamics of processes. Within this method one formalizes scale of averaging of processes during modelling. To this end a collection of dynamical systems is distinguished within an elementary dynamical system. One introduces a dimensional reduction procedure which is designed to be a method of transition between various scales. In order to consider continuum models as obtained by means of the dimensional reduction one introduces continuum with finite-dimensional fields. Owing to geometrical elements associated with the elementary dynamical system we can formalize scale of averaging within continuum mechanics approach. In general presented here approach is viewed as a continuation of the rational mechanics.

• Journal of the Ergonomics Society of Korea
• /
• v.16 no.1
• /
• pp.1-13
• /
• 1997

In this research, and investigation of the eye movement was performend when the objects perceived by the eye are three-dimensional objects, two dimensional images, and trhee dimensional images. This investigation was done by observing the EQG(Electro- oculogram) waves which were obtained from experiments. The observed waves were categorized into several groups. Differences among the waves were analyzed for each object and image perceived by the eye. In order to obtain waves for analysis, two kinds of experiments were performen. In each experiment, the saccadic eye movement and the smooth pursuit eye movement were considered as an independent variables. Waves obtained from the experiments were categorized into 4 types (Wave-1, Wave-2, Wave-3, Wave-4) depending on their characteristics. Unlike the other images, three dimensional image was revealed as a key factor for the active movement of the eye. Futhermore, a unique eye movement was observed in the case of three dimensional images where the focus of the eye was achieved through three steps.

• Journal of the Chungcheong Mathematical Society
• /
• v.11 no.1
• /
• pp.185-192
• /
• 1998

We briefly review the $S^1$-equivariant cohomology theory of a finite dimensional compact oriented $S^1$-manifold and extend our discussion in infinite dimensional case.