• Journal of the Korean Ceramic Society
• /
• v.42 no.3 s.274
• /
• pp.211-217
• /
• 2005

[ $Zn_{1-x}Co_{x}O$ (x=0-0.3) films were grown on Corning 7059 glasses by asymmetrical bipolar pulsed dc magnetron sputtering. The c-axis orientation along (002) plane was enhanced with increasing Co concentration. The $Zn_{1-x}Co_{x}O$ films are grown with fibrous grains of tight dome shape. The transmittance spectra measured from UV-visible showed that sp-d exchange interactions and typical d-d transitions become activated with increasing Co concentration. The electrical resistivity of $Zn_{1-x}Co_{x}O$ films increased with increasing Co concentration, especially it increased greatly at $30at\% Co. X-ray photoelectron spectroscopy and alternating gradient magnetometer analyses indicated that no Co metal cluster is formed and the ferromagnetic properties are exhibited. The low electrical resistivity and room temperature ferromagnetism of $Zn_{1-x}Co_{x}O$ thin films suggested the possibility of the application to Diluted Magnetic Semiconductors (DMSs).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.346-346
• /
• 2012

We investigated electrical and optical properties and chemical states of amorphous In-Ga-Zn-O (a-IGZO) thin films deposited at different substrate temperatures (from room temperature to $300^{\circ}C$). a-IGZO thin films were fabricated by radio frequency magnetron sputtering using $In_2O_3$ : $Ga_2O_3$ : ZnO = 1 : 1 : 1 target, and their electrical and optical properties and chemical states were investigated by Hall-measurement, UV-visible spectroscopy and x-ray photoelectron spectroscopy (XPS), respectively. The data showed that as substrate temperature increased, carrier concentration increased, but mobility, conductivity, transmittance in the shorter wavelength region (>350 nm), and the Tauc-plot-estimated optical bandgap decreased. XPS data indicated that the intensity of In 3d peak compared to Ga 3d peak increased but the intensity of Zn 3d peak compared to Ga 3d decreased, and that, from the deconvoluted O 1s peak, defects or oxygen vacancies and non-quaternary contents increased as the temperature increased. The relative intensity changes of the In, Zn, and O 1s sub-component are suggested to explain the changes in electrical and optical properties.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1670-1672
• /
• 2000

The stability of ZnO-$Pr_{6}O_{11}$-CoO-$Cr_{2}O_{3}-Dy_{2}O_3$ based varistors with d.c. stress were investigated. ZnO varistor doped with 4.0 mol% $Dy_{2}O_3$ exhibited the highest nonlinear exponet, but stability was very poor because of low density. In particular, the varistor containing 0.5 mol% $Dy_{2}O_3$ showed very excellent V-I characteristic, which the nonlinear exponent was 67.39 and leakage current was 1.18 ${\mu}A$, and high stability.

• Clean Technology
• /
• v.22 no.2
• /
• pp.89-95
• /
• 2016

The nanotoxicity of ZnO nanoparticles used in cosmetics and tire industry is one of emerged issues. Herein, the removal of ZnO nanoparticles dispersed in aqueous phase and its ecotoxicity were investigated. In the short-term exposure for fertilized eggs (O. latipes), the deformity was observed at 5 mg L⁻¹ of ZnO nanoparticles in some individuals and delayed hatching of eggs by retarded growth was observed at 10 mg L⁻¹ of ZnO nanoparticles. This result show that ZnO nanoparticles have cytotoxic effect to the organisms lived in water phase. Therefore, herein, the removal of ZnO nanoparticles in aqueous phase by chemical precipitation was investigated. After addition of Na₂S and Na₂HPO₄, the precipitated ZnO was transformed to ZnS and Zn₃(PO₄)₂ particles, respectively. The removal efficiency of ZnO was reached to almost 100% for two cases. In addition, the toxicity tests about ZnS and Zn₃(PO₄)₂ particles showed no acute toxicity for D. magna. This implies that transformation of ZnO to ZnS and Zn₃(PO₄)₂ particles with very low ionization constant might decrease effectively the toxicity of ZnO.

• Korean Journal of Environmental Biology
• /
• v.39 no.4
• /
• pp.550-558
• /
• 2021

In a radiotracer study, the bioaccumulation and efflux of metals in earthworms (Eisenia fetida) exposed to soil spiked with ZnO and Ag nanoparticles (AgNP) were compared to those exposed to soil spiked with ionic Zn and Ag. Additionally, the bioavailability and chemical mobility of nano- and ionic metals in the soil were estimated using the sequential extraction method and compared to the bioaccumulation factor(BAF). The BAF for ZnO (0.06) was 31 times lower than that for Zn ions (1.86), suggesting that ZnO was less bioavailable than the ionic form in contaminated soil. In contrast, the BAFs for two types of AgNPs coated with polyvinylpyrrolidone (0.12) or citrate (0.11) were comparable to those of ionic Ag (0.17). The sequential extraction of metals from the soil suggests that the chemically mobile fractions in the Zn ion treatment were higher(35%) than those (<20%) in the Ag ion treatment, which was consistent with the greater BAFs in the former than the latter. However, the chemical mobility in the ZnO treatments did not predict bioavailability. The efflux rates of Ag (3.2-3.8% d^-1) in the worms were 2-3×those(1.2-1.7% d^-1) for Zn.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.3
• /
• pp.15-19
• /
• 2003

In This paper, we developed 1.96 GHz air gap type FBAR BPF using ZnO as piezoelectric sputtered by RF magnetron at room temperature. FBAR BPF was fabricated by sputtering bottom electrode (Al), ZnO as piezoelectric and top electrode (Mo) on Si wafer one by one with RF magnetron sputter, then Si was dry etched to make an air hole. XRD test result of fabricated FBAR BPF showed that ZnO crystal was well pre-oriented as (002) and sigma value of XRC was 1.018. IL(Insertion loss) showed excellent result as 1 dB.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.211.1-211.1
• /
• 2013

We fabricate the conductive zinc oxide(ZnO) thin film using UV-enhanced atomic layer deposition. ZnO is semiconductor with a wide band gap(3.37eV) and transparent in the visible region. ZnO can be deposited with various method, such as metal organic chemical vapour deposition, magnetron sputtering and pulsed laser ablation deposition. In this experiment, ZnO thin films was deposited by atomic layer deposition using diethylzinc (DEZ) and D.I water as precursors with UV irradiation during water dosing. As a function of UV exposure time, the resistivity of ZnO thin films decreased dramatically. We were able to confirm that UV irradiation is one of the effective way to improve conductivity of ZnO thin film. The resistivity was investigated by 4 point probe. Additionally, we confirm the thin film composition is ZnO by X-ray photoelectron spectroscopy. We anticipate that this UV-enhanced ZnO thin film can be applied to electronics or photonic devices as transparent electrode.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.2
• /
• pp.190-197
• /
• 2002

In this thesis, ZnO varistors with various formulation, such as A∼E, were fabricated according to ceramic fabrication method. The microstructure, electrical properties, and surge characteristics of ZnO varistors were investigated according to ZnO varistors with various formulation. In the microstructure, A∼E\`s ZnO varistor ceramics sintered at 1130$\^{C}$ was consisted of ZnO grain(ZnO), spinel phase (Zn$\_$2.33/Sb$\_$0.67/O$\_$4/), Bi-rich phase(Bi$_2$O$_3$) and intergranuler phase, wholly. Lightning impulse residual voltage of A, B, C and E\`s ZnO varistors suited standard characteristics, below 12kV at current of 5kA. On the contrary, D\`s ZnO varistor exhibited high residual voltage as high reference voltage. In the accelerated aging test, leakage current and watt loss of B, C and D\`s ZnO varistors increases abruptly with stress time under the first a.c. stress(115$\^{C}$/3.213kV/300h). Consequently, C varistor exhibited a thermal run away. On the contrary, leakage current and watt loss of A and C\`s ZnO varistors which show low initial leakage current exhibited constant characteristics. After high current impulse test, A\`s ZnO varistor has broken the side of varistor but impulse current flowed. On the contrary, E\`s ZnO Varistor exhibited good discharge characteristics which the appearance of varistor was not wrong such as puncture, flashover, creaking and other significant damage. After long duration impulse current test, E\`s ZnO varistor exhibited good discharge characteristics which the appearance of varistor was not wrong such as puncture, flashover, creaking and other significant damage. After high current impulse test and long duration impulse current test, E\`s ZnO varistor exhibited very good characteristics which variation rate of residual voltage is 1.4% before and after test.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.993-994
• /
• 2008

Electrochromic (EC) devices are capable of reversibly changing their optical properties upon charge injection and extraction induced by the external voltage. The characteristics of the EC device, such as low power consumption, high coloration efficiency, and memory effects under open circuit status, make them suitable for use in a variety of applications including smart windows and electronic papers. Coloration due to reduction or oxidation of redox chromophores can be used for EC devices (e-paper), but the switching time is slow (second level). Recently, with increasing demand for the low cost, lightweight flat panel display with paper-like readability (electronic paper), an EC display technology based on dye-modified $TiO_2$ nanoparticle electrode was developed. A well known organic dye molecule, viologen, was adsorbed on the surface of a mesoporous $TiO_2$ nanoparticle film to form the EC electrode. On the other hand, ZnO is a wide bandgap II-VI semiconductor which has been applied in many fields such as UV lasers, field effect transistors and transparent conductors. The bandgap of the bulk ZnO is about 3.37 eV, which is close to that of the $TiO_2$ (3.4 eV). As a traditional transparent conductor, ZnO has excellent electron transport properties, even in ZnO nanoparticle films. In the past few years, one-dimension (1D) nanostructures of ZnO have attracted extensive research interest. In particular, 1D ZnO nanowires renders much better electron transportation capability by providing a direct conduction path for electron transport and greatly reducing the number of grain boundaries. These unique advantages make ZnO nanowires a promising matrix electrode for EC dye molecule loading. ZnO nanowires grow vertically from the substrate and form a dense array (Fig. 1). The ZnO nanowires show regular hexagonal cross section and the average diameter of the ZnO nanowires is about 100 nm. The cross-section image of the ZnO nanowires array (Fig. 1) indicates that the length of the ZnO nanowires is about $6\;{\mu}m$. From one on/off cycle of the ZnO EC cell (Fig. 2). We can see that, the switching time of a ZnO nanowire electrode EC cell with an active area of $1\;{\times}\;1\;cm^2$ is 170 ms and 142 ms for coloration and bleaching, respectively. The coloration and bleaching time is faster compared to the $TiO_2$ mesoporous EC devices with both coloration and bleaching time of about 250 ms for a device with an active area of $2.5\;cm^2$. With further optimization, it is possible that the response time can reach ten(s) of millisecond, i.e. capable of displaying video. Fig. 3 shows a prototype with two different transmittance states. It can be seen that good contrast was obtained. The retention was at least a few hours for these prototypes. Being an oxide, ZnO is oxidation resistant, i.e. it is more durable for field emission cathode. ZnO nanotetropods were also applied to realize the first prototype triode field emission device, making use of scattered surface-conduction electrons for field emission (Fig. 4). The device has a high efficiency (field emitted electron to total electron ratio) of about 60%. With this high efficiency, we were able to fabricate some prototype displays (Fig. 5 showing some alphanumerical symbols). ZnO tetrapods have four legs, which guarantees that there is one leg always pointing upward, even using screen printing method to fabricate the cathode.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.24-24
• /
• 2011

ZnO 직접 천이형의 와이드밴드갭 화합물 반도체로써 높은 엑시톤 결합 에너지를 가짐으로 해서 광전자나 광학디바이스로의 넓은 응용범위를 갖고 있다. 최근들어 ZnO의 비선형 광학 특성이 보고 됨으로써 새로운 광학 재료로서의 연구도 기대되고 있다. 본연구에서는 새로운 주기적 반전 구조를 제안함으로 해서 극성을 가지는 화합물 반도체의 비선형 광학 디바이스로의 응용 범위를 넓히고자 한다. ZnO는 Wurtzite 구조를 가짐으로 해서 성장 방향으로 Zn-극성 및 O-극성을 가지게 된다. 이런 자연 발생적인 극성에 의해 물리적, 화학적, 광학적 특성들이 바뀌게 됨으로, 극성의 제어는 재료의 특성을 극대화 시키기 위해 아주 중요한 항목이 되어 있습니다. 본 연구에서는 손쉽고 재현성이 확보되는 방법으로써, CrN 와 Cr2O 3의 완충층을 제안하여 ZnO 극성의 제어를 이루었고, 제안된 극성 제어 방식을 이용하여 주기적으로 Zn-극성과 O-극성이 배열된 구조(PPI 구조)를 형성 하였다. 패터닝과 재성장 방법을 통해서 다양한 구조와 사이즈의 1D, 2D PPI ZnO를 제작하는데 성공하였다. 주기적인 반전구조의 제작을 확인하기 위해 PRM(piezo response miscosocpy)이라는 방법을 통하여 주기적 극성 선택성을 확인하였으며, TEM과 PL 분석법을 통하여 구조적 광학적 특성을 분석하였다. 새롭게 제안된 극성 제어 방식을 이용하여 제작된 PPI 구조를 이용하여 비선형 광학소자로의 응용성을 확인하였다. 본발표에서는 PPI ZnO 구조의 형성방법, 분석 및 응용에 대한 제안과 결과가 논의될 것이다.