• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제16권1호
• /
• pp.13-18
• /
• 2009

A semilocal convergence analysis is provided for Newton's method in a Banach space. The inverses of the operators involved are only locally $H{\ddot{o}}lderian$. We make use of a point-based approximation and center-$H{\ddot{o}}lderian$ hypotheses for the inverses of the operators involved. Such an approach can be used to approximate solutions of equations involving nonsmooth operators.

• 한국통신학회논문지
• /
• 제19권9호
• /
• pp.1793-1801
• /
• 1994

본 논문에서는 직렬 연결된 N-단 증폭기의 1dB 이득 억압점을 예측하기 위한 새로운 방법을 제안한다. 제안된 방법은 각 증폭기 제작사로부터 제공된 스칼라 데이터를 사용하여 각 증폭기의 입출력 전력 전달함수를 산출하고 이것을 각 증폭기의 입출력이 정합되었다는 가정하에 스칼라 형태로 곱함으로써 서브 시스템의 입출력 전력 전달 함수를 산출한다. 이렇게 구해진 전달 함수를 이용하여 역으로 서브 시스템의 1dB 이득 억압점을 예측할 수 있다. 제안된 방법은 스칼라 데이타의 수에 관계없이 사용할 수 있는 일반적인 방법이지만 본 논문에서는 2개의 스칼라 데이타(선형 전력 이득, 1dB 이득 억압점)와 3개의 스칼라 데이타(선형 전력 이득, 1dB와 0.5dB 이득 억압점)만을 사용할 경우에 대해서만 각각 분석된다. 제안된 방법의 유용성을 확인하기 위해 Ku-band에서 동작하는 두개의 표본 증폭기를 사용하여 기존의 방법과 제안된 방법에 의한 예측 결과와 실험에 의해 측정된 결과를 서로 비교하기 위해 함께 제시한다.

• 수산해양기술연구
• /
• 제42권1호
• /
• pp.44-53
• /
• 2006

The expansion of near shore aquaculture is feasibility of moving aquaculture facilities into the open ocean. Numerical modeling technique using finite element method was used to enable the optimum design and evaluation of submersible aquaculture cage system. The characteristics of mooring loads response in mooring lines under waves and current and their response amplitude operators were calculated for single and three point mooring configuration at the surface condition and submerged one. The static mooring loads without wave and current loading were similar for both the surface and submerged configuration. It was calculated that three point mooring was more adequate than single point mooring for the mooring configuration of submersible aquaculture cage system. The wave induced response amplitude operators for the single point mooring configuration with the influence of currents were identical to those without the influence of currents.

• 한국인쇄학회지
• /
• 제12권1호
• /
• pp.1.2-15
• /
• 1994

This is the study which appear the relation between the situation of Anchor point and the qualities of lithographic prints using the uncoated paper. Anchor point were measured by microscopic photography and Kubelka-munk`s method. The situation of Anchor point increased with print density and print though, but it decreased with evenness and rub off. In case of commercial uncoated paper, the situation of Anchor point was optimized when it was 25~35% apporoximately. In preparation of samples for microscopic photography, the samples were used by the resin testing methods. This method used that the resin fixes the printed papers of sample very hard, in preparation of samples for microscopica potography a good result could be gained by this method.

• 대한임베디드공학회논문지
• /
• 제10권1호
• /
• pp.49-55
• /
• 2015

In this paper, we propose a fast interest point detection method using SURF algorithm. Since the SURF algorithm needs a great computations to detect the interest points and obtain the corresponding descriptors, it is not suitable for real-time based applications. In order to overcome this problem, the interest point detection step is parallelized by OpenMP and SIMD based on analysis of the scale space representation process and localization one in the step. The simulation results demonstrate that processing speed is enhanced about 55% by applying the proposed method.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.6-14
• /
• 2014

A new method to determine the total harmonic contributions of several customers and the utility at the point of common coupling is presented. The proposed method can quantify the individual harmonic impact of each suspicious harmonic source at the point of common coupling. The individual harmonic impact index is then used to assess the total harmonic contribution of each harmonic source. This index can be calculated by the results processed from instantaneous harmonic voltage and current phasor values. The results demonstrate the performance of the proposed method in terms of steady-state accuracy and response to time-varying operating conditions. The proposed index can be used for billing purposes to control harmonic distortion levels in power systems.

• 한국광학회지
• /
• 제22권1호
• /
• pp.58-63
• /
• 2011

외선 점광원 탐지장비의 탐지성능 예측을 위한 최소탐지조도(MDI)를 측정하고 실험결과를 제시하였다. 최소탐지조도 측정은 시준기를 이용하여 실험실 환경에서 수행할 수 있는 방법으로 구현하였으며 측정에 따르는 시험조건 및 절차를 상세히 기술하였다. 또한 최소탐지조도 측정 결과를 이용하여 분석한 적외선 탐지장비의 최대탐지거리 예측결과를 제시하였다.

• International Journal of Concrete Structures and Materials
• /
• 제3권1호
• /
• pp.63-69
• /
• 2009

This paper provides the engineer with a simple design method dealing with situations arise where in-situ reinforced concrete joints are cast between hollow core units. Using finite element method, hollow core slabs with wide in-situ RC joints under point load and line loads are analysed. In addition, some important behavioural characteristics of the floor slab subjected to line and point loads are investigated. In-situ reinforced concrete joint causes reduction of load distribution for remote units because distance to the remote units from the point of load is increased, while the portion of load distribution carried by loaded unit increases. Also, it was turned out load distribution factors for point load and line loads are almost same. Finally, we suggest a simple analytical method, which can determine load distribution factors using normalized deflections by regression analysis for design purposes.

• Structural Engineering and Mechanics
• /
• 제34권1호
• /
• pp.85-95
• /
• 2010

In this paper, numerical solution of the singular integral equation for the multiple curved branch-cracks is investigated. If some quadrature rule is used, one difficult point in the problem is to balance the number of unknowns and equations in the solution. This difficult point was overcome by taking the following steps: (a) to place a point dislocation at the intersecting point of branches, (b) to use the curve length method to covert the integral on the curve to an integral on the real axis, (c) to use the semi-open quadrature rule in the integration. After taking these steps, the number of the unknowns is equal to the number of the resulting algebraic equations. This is a particular advantage of the suggested method. In addition, accurate results for the stress intensity factors (SIFs) at crack tips have been found in a numerical example. Finally, several numerical examples are given to illustrate the efficiency of the method presented.

• 대한전자공학회논문지SP
• /
• 제48권2호
• /
• pp.96-101
• /
• 2011

소실점이란 실제 공간의 평행한 선들이 영상 내에 투영되면서 한곳에 모이는 점이다. 본 논문에서는 이러한 소실점의 특성을 이용한 실시간 소실점 검출 알고리즘을 제안한다. 기존의 소실점 검출 방법은 1) 복잡한 계산이 요구되거나 2) 알고리즘에 따라 소실점을 검출할 수 있는 영상이 제한되어 있다. 제안하는 방법은 블록 기반의 HOG(Histogram of Oriented Gradient)를 구하여 영상의 구조적 특성을 이용하는 것으로 영상 내에 존재하는 소실점을 실시간으로 검출한다. 먼저 영상의 블록 단위로 HOG 기술자를 구한 뒤, 제안하는 동적 프로그래밍(dynamic programing)을 이용하여 소실점의 위치를 예측한다. 본 논문에서는 다양한 영상에 대한 실험을 통해 제안하는 알고리즘이 효율적인 소실점 검출 방법임을 보이고자 한다.