• Journal of Sericultural and Entomological Science
• /
• v.8
• /
• pp.41-50
• /
• 1968

In order to achieve efficiency of laying eggs of silkworms, it is very important to eliminate noncocooning silkworms. This study is written on the basis of observation and analysis of mechanism of silkworms physiologically and anatomically. It is hoped that given herein will contribute to the effecting elimination work. Outline of the study summarize as follows: 1. It is observed through microscope that the silkworms which are seen normal state in the silk gland but no ability of cocoon making have polyhedrosis in the nerve, trachea and muscle near the tissue of the spinneret. 2. Relatively high proportion of non-cocooning silkworms are caused by the grasserie of the silkworms. 3. As a result of inoculation with purulent discharges against silkworms from first fooding through 8th day of 5th instar, number of cocooning silkworms were increased when inoculation are applied at laterer day of the instar. In the case of non-cocooning silkworms, meanwhile, resulted not big varriation when it is apllied in the early and middle of the period, but number of non-cocooning silkworm was reduced when the inoculation are given at laterer of the instar. Number of death during rearing and mounting are increased when earliest application of inoculation are carried out. 4. Symptom of grasserie was appeared more or less three days after application of the inoculation. Some silkworms which were inoculated just before mounting has ability of cocooning making even taken grasserie, in this case the silkworm can make thin cocoon. since the silkworm fall sick during cocoon making and unable of spinning soon. when the worm was affected by grasserie slightly, it was observed that the silkworm can spinning. It is supposed to be the light paralysis of spinneret is not very much influenced to spinning. 5. As a result of observation of original stock and hybrid including other 44 kinds of silkworm, many non-cocooning silkworms were found in the original stock especially originated from japanese than in hybrid. 6. A number of undulations are found in the middle division of the silk gland of non-cocooning silkworms. 7. According to the observation of the sizes of the body and digestive organs, normal natured silkworms and non-cocooning silkworms are more or less same in length, but the width, circumference of bodies and digestive organs were more larger in the later. If silkworm which was in the period of active eating of 5th instar was given shock of dropping to the floor, the silkworm receives little more shock when hit to side of the body than to head, and concrete floor than ondol and wooden floor.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.565-575
• /
• 2009

In recent years, there have been numerous explosion-related accidents due to military and terrorist activities. Such incidents caused not only damages to structures but also human casualties, especially in urban areas. To protect structures and save human lives against explosion accidents, better understanding of the explosion effect on structures is needed. In an explosion, the blast load is applied to concrete structures as an impulsive load of extremely short duration with very high pressure and heat. Generally, concrete is known to have a relatively high blast resistance compared to other construction materials. However, normal strength concrete structures require higher strength to improve their resistance against impact and blast loads. Therefore, a new material with high-energy absorption capacity and high resistance to damage is needed for blast resistance design. Recently, Ultra High Strength Concrete(UHSC) and Reactive Powder Concrete(RPC) have been actively developed to significantly improve concrete strength. UHSC and RPC, can improve concrete strength, reduce member size and weight, and improve workability. High strength concrete are used to improve earthquake resistance and increase height and bridge span. Also, UHSC and RPC, can be implemented for blast resistance design of infrastructure susceptible to terror or impact such as 9.11 terror attack. Therefore, in this study, the blast tests are performed to investigate the behavior of UHSC and RPC slabs under blast loading. Blast wave characteristics including incident and reflected pressures as well as maximum and residual displacements and strains in steel and concrete surface are measured. Also, blast damages and failure modes were recorded for each specimen. From these tests, UHSC and RPC have shown to better blast explosions resistance compare to normal strength concrete.

• The Korean Journal of Pharmacology
• /
• v.27 no.1
• /
• pp.13-20
• /
• 1991

There are some rather conflicting reports correlating ECS-induced changes of brain acetylcholine, and recently, Zawia and Bondy(1990) proposed the biological role of polyamine system in the long-term adaptive responses of brain to electrical stimulation. This study was undertaken to evaluate the effects of a single or repeated ECS(10mA, 100cps, 1sec; 5 ECS spread out over 9 days) on the brain acetylcholine(ACh) and polyamine contents of male mice. The ACh contents of temporal cortex(TCx) and decorticated cerebrum(dc-CB) were markedly increased by 79.9% and 49.4%, respectively, 10 and 30 min after ECS, and the increases were significantly attenuated with repeated 5 ECS, particularly in dc-CB. The putrescine concentrations of both TCx and dc-CB were little different and not affected by 1 ECS or 5 ECS. But the spermidine(Sd) concentration was higher in dc-CB and spermine(Sm) higher in TCx. While they were moderately decreased after 1 ECS, and their decreases were accentuated after 5 ECS, particularly in dc-CB.Sm(30mg/kg, i.p. inject. 30min before ECS) did not affect the ECS-induced increase of ACh content. Thease results suggest that both of brain ACh and polyamine may be implicated with the long-term adaptive responses to electrical stimulation

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.12 no.1 s.24
• /
• pp.67-74
• /
• 2006

The ship plating is generally subjected to combined in-plane load and lateral pressure loads. In-plane loads include axial load and edge shear, which are mainly induced by overall hull girder bending and torsion rf the vessel. Lateral pressure is due to water pressure and cargo. These load components are not always applied simultaneously, but more than one can normally exist and interact. Hence, for more rational and safe design rf ship structures, it is of crucial importance to better understand the interaction relationship of the buckling and ultimate strength for ship plating under combined loads. Actual ship plates are subjected to relatively small water pressure except for the impact load due to slamming and panting etc. The present paper describes an accurate and fast procedure for analyzing the elastic-plastic large deflection behavior up to the ultimate limit state of ship plates under combined loads. In this paper, the ultimate strength characteristics of plates under axial compressive loads and lateral pressure loads are investigated secondary buckling behavior through ANSYS elastic-plastic large deflection finite element analysis with varying lateral pressure load level.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.150-150
• /
• 2020

본 연구에서는 수리모형실험을 통하여 원형 다단 실린더 게이트 형식의 취수시설에서 발생하는 공기연행을 분석하였다. 수리모형실험의 원형은 경상북도 청도군에 위치한 운문댐의 "운문댐 안전성 강화사업"에서 계획되고 있는 신설취수탑을 기준으로 상사법칙은 Froude상사법칙을 적용하고 1/20의 모형 축척을 가지는 취수탑의 국부모형에 하류단 수위를 고려하기 위해 유량조절시설을 설치하여 실험을 실시하였다. 실험조건은 크게 두 가지로 구분하였으며, 수면으로부터 유입구 상단부까지의 거리 ∆h1(m)과 유입부 저수지 저류 수위와 하류단 유량조절시설간의 수위차인 ∆h2(m)이며, ∆h1에 대한 조건은 0.01m~0.06m로 0.01m 간격으로 6가지, ∆h2에 대한 조건은 0.10m~1.70m로 0.20m간격으로 9가지로 이를 조합하여 총 54개 CASE에 대해 진행하였다. 실험결과 공기연행 발생 시 그에 따른 영향을 평가하기 위해 발생 정도에 따라 미발생(Not Occur), 간헐적(Intermittent), 빈번한(Frequent), 지속적(Continuation), 공기 폭발(Air Explosion)로 분류하였으며, 각 공기연행 발생 시 취수유량의 감소율 및 영향을 분석한 결과 간헐적 공기연행 발생 시 최대 약 3.75%의 취수유량 감소, 빈번한 공기연행 발생 시 취수유량은 전체적으로 10%, 최대 약 13.19% 감소하였으며, 지속적 공기연행 발생 시 발생 이후 ∆h2증가에 의한 취수유량의 증가가 거의 이루어지지 않으며, 최대 56.25%의 취수유량이 감소, 공기 폭발 발생 시 취수유량의 영향은 지속적 발생과 비슷하나 관내 공기 포집 후 유입구로 방출 시 관에 강한 충격을 주어 안정성에도 큰 영향을 미칠 것으로 판단되어, 이에 안정성 및 취수유량 감소율을 고려하여 빈번, 지속, 공기 폭발 발생 영역에서의 취수는 적합하지 않으며, 공기연행 미발생 및 간헐적 발생 영역에서의 취수 시 목표 취수유량이 1.00~4.00(㎥/s)일 때 ∆h1= 0.40m 이상, 4.00~9.30(㎥/s) 일 때 ∆h1= 0.60m 이상, 9.30~9.53(㎥/s) 일 때 ∆h1=0.80m 이상, 9.53~9.65(㎥/s) 일 때 ∆h1= 1.00m 이상에서 취수유량 감소율 3.75% 이내로 취수유량의 확보가 가능하다. 이러한 결과는 원형 다단 실린더 게이트 형식의 취수시설에 대해 취수 시 수면와류에 의한 Air Core와 그에 따른 공기연행의 발생 조건과 영향을 수리모형실험을 통해 확인함으로써 실제 운용 시 보다 안정적이고 효율적인 운용에 대한 자료로 활용될 수 있을 것으로 판단되며, 추가로 수치해석을 통한 비교 및 공기연행과 관내 공기포집 정도에 대한 연구를 통해 보다 정확한 자료제시가 가능할 것으로 판단된다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.3
• /
• pp.279-293
• /
• 1995

The most obvious and easily recognizable sources of potential water pollution are point sources such as domestic and industrial wastes. But recently, the potential effects of nonpoint sources on water quality have been increased apparently. In order to evaluate the characteristics and the effects of nonpoint sources on water quality, this study was performed in Suyeong Bay from May, 1992 to July, 1992. The depth-averaged 2-dimensional numerical model, which consists of the hydrodynamic model and the diffusion model was applied to simulate the water quality in Suyeong Bay. When flowrate was $65.736m^3/s,$ the concentration of pollutants (COD, TSS and VSS) at Oncheon stream (Sebeong bridge) during second flush were very high as much as 121.4mg/l of COD, 1148.0mg/l of TSS and 262.0mg/1 of VSS. When flowrate was 4.686m^3/s, the concentration of pollutants $(TIN,\;NH_4\;^+-\;N,\;NO_2\;^--N\;and\;PO_4\;^{3-}-P)$ during the first flush were very high as much as 20.306mg/1 of TIN, 14.154mg/1 of $NH_4\;^+-N$, 9.571mg/l of $NO_2\;^--N$ and l.785mg/l of $PO_2\;^{3-}-P$ As results of the hydrodynamic model simulation, the computed maximum velocity of tidal currents in Suyeong Bay was 0.3m/s and their direction was clockwise flow for ebb tide and counter clockwise flow for Hood tide. Four different methods were applied for the diffusion simulation in Suyeong Bay. There were the effects for the water quality due to point loads, annual nonpoint loads and nonpoint loads during the wet weather and the investigation period, respectively. The efforts of annual nonpoint loads and nonpoint loads during the wet weather seem to be slightly deteriorated in comparison with the effects of point loads. However, the bay was significantly polluted by the nonpoint loads during the investigation period. In this case, COD and SS concentrations ranged 2.0-30.0mg/l, 7.0- 200.0mg/l in ebb tide, respectively. From these results, it can be emphasized that the large amount of pollutants caused by nonpoint sources during the wet weather were discharged into the bay, and affected significantly to both the water quality and the marine ecosystem. Therefore, it is necessary to consider the loadings of nonpoint pollutants to plan wastewater treatment plant.

• Korean Journal of Food Science and Technology
• /
• v.29 no.5
• /
• pp.919-924
• /
• 1997

The changes in physicochemical properties of cooked rice stored in an electric rice cooker at different temperature (63, 66, 69 and $72^{\circ}C$) were investigated. The growth of thermophilic bacteria was gradually increased in all samples with storage time up to 6 hours and increased rapidly afterward. The bacterial growth rate was higher during storage at low temperature than at high temperature, and the bacterial number generally reached the maximum at 18 hours of the storage. The number of bacteria in sample stored at $63^{\circ}C$ was increased to $10^6$ CFU/g after storage for 6 hours. The heat treatment at 6 hours of storage decreased the bacterial number to $10^5 $ CFU/g at 8 hours of storage. Bacterial number was gradually increased with storage time after the first heat treatment. When the sample was reheated after 8 hours of storage, the bacterial number was reduced to the level at which off-odor was not detected after storage for 24 hours. During the storage, moisture content of heat-treated sample was lower than that of sample stored at $63^{\circ}C$ but higher than that of sample stored at $72^{\circ}C$. The L value of heat-treated sample was higher than that of the sample stored at $72^{\circ}C$, but lower than that of the sample stored at $63^{\circ}C$. The b value showed an opposite trend to the L value with regard to the storage temperature. Changes in texture were not remarkable during the storage for the sample heat-treated and stored at low temperature. The occurrence of off-odor and browning was depressed in the heat-treated sample, and the texture and overall eating quality were more acceptable than the samples stored at low temperature.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.1
• /
• pp.1-11
• /
• 2020

Medium to large post structures installed along the roadside without proper protection can lead to serious vehicle damage and occupant injury at the impact. In North America and Europe, splitting systems such as slip base or breakaway device are used to reduce impacts. But the system has the risk of secondary accident when the splitted post falls down to the traffic or pedestrian. Sliding Post have been proposed as a way to solve this problem. By studying the crash test results of the 1.3ton and 0.9ton vehicle with 60 km/h and 80 km/h to a Rigidly Fixed Post (RFP) and Sliding Post (SP), danger of the conventional RFP and crashworthiness of the SP have been proven. While collision analysis only from the acceleration measured at the center of the vehicle assumes the motion of the post is the same as that of the vehicle, in this paper, by adding high speed film data to the analysis with vehicle acceleration could have separate the post motion from the vehicle motion. It gives better explanations on the movement of post and vehicle in each distinctive time step and provides basics to the crashworthy post design.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.68-87
• /
• 1982

In Korea, this is the situation at moment that the total demand of timber in 1972 is more than 5 million cubic meters. On the other hand, however, the available domestic supply of timber at the same year is only about, 1 million cubic meters. A great unbalancing between demand and supply of timber has been prevailing. To solve this hard problem, it has been necessitiated to build up the forest stocks as early as possible with fast grown species such as poplar. Under circumstances, poplar plantations which have been carryed on government and private have reached to large area of 116,603 hectors from 1962 up to date. It has now be come a principal timber resources in this country, and required the basic study on various properties of wood for it's proper utilization, since it has not been made of any systematic study on the properties of Populus grown in Korea. In order to investigate the properties such as anatomical, physical and mechanical properties of nine different species (P. euramericana Guiner I-214. P. euramericana Guiner I-476, P. deltoides Marsh, P. nigra var. italica (Muchk) Koeme, P. alba L.,P. alba $\times$ glandulosa P. maximowiczii Henry, P. koreana Rehder, P. davidiana Dode) of poplar for their proper use and development of new ways of grading processing and quality improving, this study has been made by the Forest Research Institute.

• The Korean Journal of Pesticide Science
• /
• v.2 no.1
• /
• pp.70-78
• /
• 1998

This study was conducted to investigate the adsorption-desorption characteristics of herbicide paraquat on clay minerals, humic materials, and soils under the laboratory conditions. Adsorption time of paraquat on clay minerals was faster than organic materials and soils. Adsorption amount on montmorillonite, 2:1 expanding-lattice clay mineral, was largest among the adsorbents tested. The adsorption capacity of paraquat was approximately 21 % of cation exchange capacity in soils, 45.1 % in kaolinite, and 80.6% in montmorillonite. Humic materials, humic acid and fulvic acid isolated from soil II, adsorbed larger amount of paraquat than kaolinite and soils. Distribution of tightly bound type of paraquat was larger in clay mineral and soils but loosely bound type was larger in humic acid and fulvic acid. In oxidized soil, the adsorption amount of paraquat was decreased to 85.1-95.5% of original soils. Distribution of unbound and loosely bound type of paraquat was decreased in oxidized soil but tightly bound type was increased. The competition cations decreased paraquat adsorption on humic materials and soils but not affected on montmorillonite. No difference was observed as the kinds of cations. In cation-saturated adsorbents, the adsorption amount was decreased largely in humic materials and soils but decreased a little in montmorillonite. The tightly bound type of paraquat in all adsorbents was not desorbed by pH variation, sonication, and cation application but loosely bound type was desorbed. However, the desorption amount was different as a kinds of adsorbents and desorption methods.