• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.1471-1472
• /
• 2010

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.689-690
• /
• 2008

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.81-87
• /
• 2017

This paper describes the dynamic behavior and enhancement of Korean high-speed trains. The tail vibration reduction method of the yaw damper installation method change, which was derived from previous research, was applied to the running test of high-speed train. In addition, the vibration reduction method for the entire vehicle was derived by a numerical method and its effect was confirmed by a running test. The improved design was applied to the double-deck high-speed train coaches and the commissioning proceeded without problems in dynamic behavior. Sensitivity analysis of the suspension parameters affecting the critical speed of Korean next-generation high-speed trains was performed and four design variables that greatly affected the critical speed were derived. These were in the order of the primary elastic joint x-directional stiffness, the secondary yaw damper series stiffness, the secondary lateral damper damping coefficient, and the carbody damper damping coefficient. By optimizing the design variables, the suspension parameter that improves the critical speed by 23.3% can be used in the commercial designs of Korean next-generation high-speed trains.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.69-74
• /
• 1998

차량에서 인체가 노출되는 진동환경으로서 좌석과 바닥에서의 진동사이에 위상차가 존재하는 경우에 대한 인체의 반응을 주관평가 실험을 통해 분석하였다. 인체가 진동에 민감하게 반응할 뿐만 아니라 인체와 좌석으로 구성되는 진동시스템의 공진주파수와 관련된 2.5, 3.15, 4, 5, 6.3 Hz의 주파수에서, 진동의 크기를 각각 0.25, 0.4, 0.63, 1.0, 1.6m/s$^{2}$로 변화시켜 가며 위상차가 인체의 안락성에 어떻게 영향을 미치는 지를 분석하였다. 두 진동간의 위상차는 진동량이 적을수록, 또 주파수가 낮을수록 인체의 안락성에 악영향을 미쳤다. 진동의 진폭이 0.25m/s$^{2}$ 일 때 위상차가 180.deg.인 경우의 불편함은 0.deg.인 경우보다 2.5배 정도 큰 것으로 나타났다. 특히 현가장치가 장착된 의자의 경우에는 좌석과 바닥진동의 위상차이가 안락성에 미치는 영향을 정량적으로 파악하여 인체-좌석 시스템의 공진주파수를 선정해야 함을 알 수 있다.

• Journal of the Korean Society for Railway
• /
• v.20 no.1
• /
• pp.111-119
• /
• 2017

In this study, deflection limits based on the vibration serviceability of guideway structures are proposed considering maglev train-guideway interaction. Equations of motion are derived for a simplified maglev railway. Feedback constants for the control of the electromagnetic force for levitation are optimized in order to minimize the airgap fluctuations. Deflection limits for a guideway are calculated for various operating speeds of a maglev train, span lengths of a guideway, and natural frequencies and damping ratios of the second suspension in order to satisfy the serviceability criteria for airgaps and for the vertical acceleration of a cabin. From the analysis results, proposed are requirements for the second suspension of maglev trains and deflection limits for guideway structures.

• Journal of the Korean Society for Railway
• /
• v.20 no.3
• /
• pp.311-319
• /
• 2017

The primary suspension system of a railway vehicle restrains the wheelset and the bogie, which greatly affects the dynamic characteristics of the vehicle depending on the stiffness in each direction. In order to improve the dynamic characteristics, different stiffness in each direction is required. However, designing different stiffness in each direction is difficult in the case of a general suspension device. To address this, in this paper, an optimization technique is applied to design different stiffness in each direction by using a conical rubber spring. The optimization is performed by using target and analysis RMS values. Lastly, the final model is proposed by complementing the shape of the weak part of the model. An actual model is developed and the reliability of the optimization model is proved on the basis of a deviation average of about 7.7% compared to the target stiffness through a static load test. In addition, the stiffness value is applied to a multibody dynamics model to analyze the stability and curve performance. The critical speed of the improved model was 190km/h, which was faster than the maximum speed of 110km/h. In addition, the steering performance is improved by 34% compared with the conventional model.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.95-95
• /
• 2004

철도차량용 주행장치인 대차는 차체의 하중을 지지하고, 승객 및 차량의 안전, 주행성능 및 승차감에 지대한 영향을 미치는 핵심 구조부품이다. 주행장치는 크게 대차틀, 차륜 및 차축, 1차 2차 현가장치, 제동장치, 전동기 및 동력전달장치 등으로 구성되며, 대차틀은 형상이 복잡하고 하중을 직접 지지할 뿐만 아니라 하중조건도 정적 및 동적하중이 복합적으로 작용하고 있다. 대차틀은 차체 자중 및 승객 하중에 의한 정하중과 곡선주행, 제동시 발생하는 하중 및 불규칙한 선로와 차체, 주행장치, 윤축의 운동모드에 의한 동하중을 받고 있다.(중략)

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.984-988
• /
• 2010

In Korea, the next generation high-speed train, whose target is maximum speed of 400km/h and operating speed of 370km/h, has been developed since 2007. In this paper, the safety of the next generation high-speed train is compared UIC 518OR under the malfunctioning situation of the suspension system. The bogie of the next generation high-speed train has two suspensions. Two different vehicle models of the next generation high-speed train are created by using VAMPIRE and ADAMS/Rail, which are specialized to design railway vehicle. And Those models are showed same dynamic properties. First of all, the sensitivity analysis of ModelCenter is performed using model of VAMPIRE. One suspension element which has significant effects on the safety are selected by result of the sensitivity analysis. And then, the dynamic analysis when the suspension element is broken is performed using ADAMS/Rail. The 30km track between Pungsegyo and Biryong tunnel in Gyeongbu High-speed Line was used at the dynamic analysis. The estimated value is found by using the normal method of UIC 518OR. The estimated values on the normal/fault state and the limit values of UIC 518OR are compared. Finally, the safety of the next generation high-speed train is verified.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.1
• /
• pp.53-65
• /
• 1992

For improving the performance of maglev systems with a combined lift and guidance, it is suggested that the multivariable control systems and a secondary suspension should be added. The former is required to reject both track irregularities in vertical disturbances and wind gusts in lateral disturbances, and the latter to guarantee passengers against an unsatisfied criteria in ride quality. In this paper, bond graph model for the study of nonlinear dynamics of maglev systems with a combined lift and guidance is presented briefly. And, the secondary suspension is analyzed to understand the role of stiffness and damping factors in passive devices. Finally, LQG/LTR mulitivariable control systems are designed for the overall maglev systems with and without secondary suspension, and then the system performances in these two cases are evaluated.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.7
• /
• pp.732-740
• /
• 2008

This paper presents vibration control performances and stability evaluations of railway vehicle featuring controllable magnetorheological(MR) damper. The MR damper model is developed and then incorporated with the governing equations of motion of the railway vehicle which includes vehicle body, bogie and wheel-set. A cylindrical type of MR damper is devised and its damping force is evaluated by considering fluid viscosity and MR effect Design parameters are determined to achieve desired damping force level applicable to real railway vehicle. Subsequently, computer simulation of vibration control and stability analysis is performed using Matlab Simulink.