• Journal of Industrial Convergence
• /
• v.21 no.9
• /
• pp.67-75
• /
• 2023

The purpose of this study was to investigate difference between walking practice and happiness of one-person households according to the life cycles. This is a secondary analysis study using data from the 2021 Community Health Survey. The data were analyzed using SPSS 25 program for composite sample statistical analysis. As a result, in old age, there were many women, low education, and non-economic activities, and there were many basic living and less than 7 hours of sleep. The walking practice of one-person households was low in youth, middle age, and old age of one-person households. The level of happiness by life cycles of one-person households was 6.69 points in youth, 6.43 points in old age, and 6.19 points in middle age, and the happiness of middle age was the lowest. In youth, middle age, and old age of one-person households, there was a significant differences in happiness depending on walking practice. Therefore, social, welfare, and policy strategies should be developed to encourage walking to improve happiness of one-person households.

• 전기의세계
• /
• v.9
• /
• pp.28-35
• /
• 1962

많은 수의 동기기를 포함한 전력계통의 과도안정도를 계산함에 있어서 각각의 동기기를 독립적으로 취급하는 것은 실제상 불가능하며, 따라서 몇 대의 동기기를 1대의 동기기로 치환하여 계통을 간략하게 하는 것이 보통이다. 그러나 이렇게 함으로써 피시험동기기의 안정도에 주는 영향은 상금도 문제로 되어있다. 본 실험의 목적은 그 영향을 여러가지 운전조건에 대하여 검토하여 정당한 등치법을 찾는 데 있다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.13 no.6
• /
• pp.8-16
• /
• 2009

The development of high-pressure sub-scale combustion chambers is described. A total of four high-pressure sub-scale combustion chambers having either a detachable structure of the mixing head and the chamber or a single welded regenerative cooling structure have been developed. The sub-scale combustion chambers have a chamber pressure of 70 bar and propellant mass flow rate of 5.1~9.1 kg/s. The propellant mass flow rate and the recess number of the injector were changed for the improvement of combustion performance and they were validated through hot firing tests. The design and manufacturing techniques of regenerative cooling channel and film cooling to be applied to the full-scale combustion chamber were adopted through the present development and verified.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.10a
• /
• pp.259-264
• /
• 2004

The critical component of combustor having high combustion efficiency for high performance liquid rocket engine is injector. The results of design and hot firing tests of six sub-scale combustors which have respectively an impinging type injector(1ea.), an bi-propellant swirl closed injector(1ea.), and hi-propellant swirl mixed injector(4ea.) were described in this paper. The combustion test were successfully performed. The combustion efficiency have higher value than predicted value and high frequency combustion instability does not occur.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.2
• /
• pp.253-259
• /
• 2016

This paper introduces a new variable power divider circuit with an arbitrary power division ratio ranging from $1:{\infty}$ to ${\infty}:1$. The proposed power divider circuit consists of one branch-line coupler to be a good input matching characteristic, two variable phase shifters with 90-degree phase variation to be connected two output paths of the branch-line coupler, and one ring-hybrid coupler to combine output signals of two variable phase shifter. The power division ratio between the two output ports of the proposed power divider can be easily controlled by the phase variation of the two phase shifter. The proposed power divider circuit fabricates on laminated RF-35 (h = 20 mil, er=3.5; Taconic) with a center frequency of 2 GHz. The power division ratio of the fabricated prototype varies from about 1:1000 to 5000000:1, with an input reflection characteristic(S11) of below -20 dB, an insertion loss of about -1.0 dB, and an isolation characteristic of below -17 dB between two output ports in the range 1.9-2.1 GHz.

• Korean Journal of Optics and Photonics
• /
• v.5 no.2
• /
• pp.286-290
• /
• 1994

Lasing characteristics of an Er-doped fiber laser have been investigated at various conditions of resonator reflectivities and pump powers. Variation of the laser wavelength with various mirror reflectivities has been compared with the theoretical analysis based on absorption, gain spectra, and resonator parameters. The maximum slope efficiency of 38% was obtained with the resonator's mirror reflectivities of 100% and 4% on both sides, and the threshold powers were varied from 7.8 mW to 5.6 mW, and lasing wavelengths were varied $1.532\mum to 1.563\mum and 1.558 \mum to 1.570 \mum$ for 6 and 15.8 mlong Er-doped fiber, respectively, as the resonator reflectivities were changed from 0.0016 to 0.9.to 0.9.

• Clinical and Experimental Reproductive Medicine
• /
• v.12 no.1
• /
• pp.31-40
• /
• 1985

월경주기 중 황체기가 짧은 여성 즉 황체기 단축현상을 가진 한국여성(SLP) 의 특성을 조사하고 진단하는 방법을 개발하기 위하여 본 실험을 행하였다. 재료는 정상 월경주기를 가진 12명의 여성에서 26주기와 8명의 황체기 단축현상을 가진 여성에서 17주기를 선택하였다. 기상후 첫 오줌에서 steroid glucuronides의 농도를 측정하여 비교한 결과는 다음과 같았다. SLP 의 estrone -3 -glucuronide ($E_1G)의 농도는 초기 여포기와 황체기 동안 정상인에 비하여 현저히 낮았다. 또한 SLP 의 전 월경기 중 pregnanediol-$3{\alpha}$-glucuronide($P_2G$)의 농도 역시 유의성있게 낮았다. 그러나 $E_1G/P_2G$의 비율은 여포기가 황체기에 비하여 현저히 높았고, SLP 여성의 비율이 정상인 보다 각 월경주기 중 유의성있게 높았다. 위의 결과로 보아 $E_1G$, $P_2G$및 $E_1G/P_2G$의 농도차로 황체기 단축현상을 가진 여성을 진단 하고 또 치료시 난소의 기능조절에 이욜될 수 있을 것으로 사려된다.

• The KIPS Transactions:PartA
• /
• v.10A no.4
• /
• pp.347-356
• /
• 2003

The OCT algorithm needs efficient hardware architecture to compute inner product. The conventional methods have large hardware complexity. Because of this reason. a computation sharing multiplier was proposed for implementing inner product. However, the existing multiplier has inefficient hardware architecture in precomputer and select units. Therefore it degrades the performance of the multiplier. In this paper, we proposed a new efficient computation sharing multiplier and applied it to implementation of 1-D DCT processor. The comparison results show that the new multiplier is more efficient than an old one when hardware architectures and logic synthesis results were compared. The designed 1-D DCT processor by using the proposed multiplier is more high performance than typical design methods.

• The Optical Journal
• /
• s.122
• /
• pp.20-21
• /
• 2009

본 통계는 2002년 1월부터 디아조(Diazo) 광디스크 파일링, 타이프 라이터, 2005년 1월부터 서류분쇄기(Shredder), 타임레코더(Time recorder)가 생산 통계에서 제외되었기 때문에 전체의 숫자에는 포함되어 있지 않다. 지면 사정상 오프셋인쇄기(생산수 출입)과 워드프로세서(수출입)의 표는 생략했지만, 사무기 전체의 숫자에는 포함되어 있다. 그리고 2007년부터 회계기(수출입)가 통계에서 제외되어 전체 숫자에는 들어있지 않다. 한편, 2007년 1월 통계부터 수출입의 복사기 카테고리가 변경되어, 지금까지 계산하지 않았던 레이저복합기(FAX, 프린터, 스캐너 기능을 탑재한 기종)를 통계에 넣었기 때문에 숫자가 종전보다 늘어났으며 정전간접식, 기타 분류는 없어졌다.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.715-718
• /
• 1998

본 논문에서는 시분할 구조와 1.5bit 디지털 에러보상을 사용하여 작은 면적을 갖는 저 전압, 저전력 10bit 1㎒ 사이클릭 A/D 변환기를 제안하였다. 제안된 사이클릭 A/D 변환기는 시분할 구조를 사용함으로서 변환속도의 향상과 저 전력 특성을 가질 수 있었으며 1.5bit 디지털 에러 보상을 사용함으로서 10bit의 고해상도와 저 전력 특성을 구현할 수 있었다. 제안된 사이클릭 A/D 변환기는 0.6㎛ CMOS Nwell 공정 parameter로 simulation 하였으며 layout 결과 칩면적은 1.1㎜×0.8㎜ 이며 이는 비슷한 성능을 갖는 다른 A/D 변환기에 비하여 매우 작은 크기이다. 제안된 사이클릭 A/D 변환기는 3V의 전원전압에 1.6㎽의 전력소모를 갖는다. Matlab simulation 결과 INL, DNL은 각각 0.6LSB, 0.7LSB 이하의 값을 보였다.