• Journal of Navigation and Port Research
• /
• v.38 no.4
• /
• pp.379-384
• /
• 2014

In case of sunken tankers, remaining-oil recovery operation should be conducted due to possible oil spill accident. However, the deep sea operation make difficulties in checking the completion of remaining oil recovery process, therefore the work termination procedure is very important. In this paper, a reasonable work termination procedure through the comparison and analysis of two cases(Youil No.1 and Osung No.3, Kyung-Shin) which were performed in different method, using disparate equipment. By investigating previously applied methods and techniques, work speed, safety and expenses were compared. The proposed ending procedure of the remaining-oil recovery project is to recover the remaining oil from each cargo tanks and to clean up such tanks whilst an independent surveyor proceeds to a confirmation procedure whereby said surveyor checks out whether any remaining oil exists by putting a stick in each cleaned up tanks and opening up the hatch cover of the tanks or the top place of the tanks to confirm the cleanness of oil. Such procedure shall be done through discussion by the ordering party, contractor and the independent surveyor all together with a flexible application.

• Spatial Information Research
• /
• v.18 no.5
• /
• pp.93-105
• /
• 2010

Spatial neighborhoods are spaces which are relate to target space. A 3D spatial query which is a function for searching spatial neighborhoods is a significant function in spatial analysis. Various methodologies have been proposed in related these studies, this study suggests an adjacent based methodology. The methodology of this paper implements topological data for represent a adjacency via using network based topological data model, then apply modifiable Dijkstra's algorithm to each topological data. Results of ordering analysis about an adjacent space from a target space were visualized and considered ways to take advantage of. Object of this paper is to implement a 3D spatial query for searching a target space with a adjacent relationship in 3D space. And purposes of this study are to 1)generate adjacency based 3D network data via network based topological data model and to 2)implement a 3D spatial query for searching spatial neighborhoods by applying Dijkstra's algorithms to these data.

• Journal of the Korean Society of Costume
• /
• v.65 no.1
• /
• pp.46-60
• /
• 2015

This study analyzed the process of development and verification of standards through the competency analysis of fashion accessories products in the development of 'National Competency Standards'(NCS), which was carried out in 2013 for the fashion industry. The NCS for fashion accessories production was developed through three Focus Group Interviews (FGIs) and fashion accessories production was defined as "the process of design, development and manufacture intended to produce items that improve the degree of completion of fashion products that are produced from textile fabric, knitted fabric, leather and other materials such as bags, belts, hats, gloves, scarves, neckties and socks with the exception of clothes". The competency unit for fashion accessories production was analyzed in 11 categories: development of design; development of materials; production of prototype samples; calculation of cost; determination of mass production model and price; planning of main manufacture process; ordering of materials; planning for mass production; preparation for mass production; mass production; and inspection of completed products, and the verification was carried out on development outcomes through a survey carried out of on-site personnel. This study recommends the following direction for future improvements based on an analysis of the development process of the NCS for fashion accessories production. First, future development of standards should first provide a rational category system for each area of fashion good production based on the production process, which should be followed by a detailed competency survey. Second, in order to ensure a more efficient verification survey, an expert for each competency unit should be designated for the develop standard to induce a more sincere response. Also the questionnaire should require supplementation in order to collect the various additional opinions of experts of the field. Finally, this study concludes that it is urgent to procure an education infrastructure and specialized professors in order to apply the competency standard for fashion accessories production to the education sector. This study also concludes that the government will be required to provide systematic and consistent support aimed at supplementing development and forming a firm collaborative working environment for the industry and academia in order to improve the current education environment and build a more field-oriented education environment.

• Journal of the Korean Society for information Management
• /
• v.30 no.1
• /
• pp.111-129
• /
• 2013

This study analyzed the process of multimedia services and indexed the core quality characteristics through the tools employed in 'Define' and 'Measure' steps of the 6 Sigma DMAIC methodology. To achieve the goal, as a case study of 'S' University Central Library, first, brainstorming technique was used to tap the librarians, second, interview with the half-time student workers, third, user's opinion on homepage was analyzed and lastly, the interview with the users. This study also drew some potential causal factors which would likely to affect the multimedia service using Process Map and C&E Diagram. Those factors were prioritized using X-Y matrix and Pareto Chart. This study revealed 14 factors affecting multimedia services: 'presence/absence of the persons who are in charge of selection', 'cycle of selection materials', 'presence/absence of seperated multimedia room', 'materials arrangement method', 'notification of popular materials', 'notification of documents arrivals', 'methods of noticing new arrivals', 'methods of ordering materials', 'cycle of checking order status', 'types of persons requesting materials', 'methods of requesting materials', 'checking of the status of the returned materials', 'methods of noticing materials in housed', and 'methods of ways to return overdue materials'.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.1
• /
• pp.86-96
• /
• 2013

The realtime monitoring of radon ($^{222}Rn$) concentrations has been carried out from Gosan site, Jeju Island for three years of 2006~2008, in order to evaluate the background level and timely variational characteristics of atmospheric radon. The mean concentration of radon measured during the studying period was $2965mBq/m^3$ with its annual mean values in the range of $2768{\sim}3124mBq/m^3$. The relative ordering of the seasonal mean concentrations was seemed to vary such as winter ($3578mBq/m^3$) > fall ($3351mBq/m^3$) > spring ($2832mBq/m^3$) > summer ($2073mBq/m^3$). The monthly mean concentrations were in the order of Jan>Feb>Oct>Nov>Dec>Mar> Sep>Apr>May>Jun>Aug>Jul, so that the highest January value ($3713mBq/m^3$) exceeded almost twice as the July minimum ($1946mBq/m^3$). The hourly concentrations in a day showed the highest level ($3356mBq/m^3$) at around 7 a.m., increasing during nighttime, while reaching the lowest ($2574mBq/m^3$) at around 3 p.m. From the backward trajectory analysis for a continental fetch of radon, the high concentrations (10%) of radon matched with the air mass moving from the Asia continent to Jeju area. In contrast, the low concentrations (10%) of radon were generally correlated with the air mass of the North Pacific Ocean. In comparison by sectional inflow pathways of air mass, the radon concentrations were relatively high from the north China and the Korean peninsula.

• Korean Journal of Materials Research
• /
• v.11 no.8
• /
• pp.661-665
• /
• 2001

The mechanical alloying (MA) effect in $\sigma$-VFe intermetallic compound was studied by neutron and X-ray diffraction. The structure of MA $\sigma$-VFe powders were characterized by the X- ray diffraction with Cu- $K\alpha$ radiation and neutron diffraction with monochromatic neutrons of $1.835\AA$ using a high resolution powder diffractometer (HRPD). Mechanical alloying of $\sigma$-VFe compound gives rise to a dramatic structural change. After 60 hours of MA, the Fe-Fe distribution of the $\sigma$- phase VFe tetragonal structure with 30 atoms in a unit cell is found to change into that of the $\sigma$-(V,Fe) solid solution with bcc structure, which is a stable phase at elevated temperature above $1200^{\circ}C$. A comparison of X-ray diffraction data for the $\alpha$-phase has been also made with the corresponding neutron diffraction data. The (101) and (111) diffraction peaks of the $\sigma$-phase was clearly observed only in neutron diffraction pattern, which is believed to be a characteristic feature due to the chemical atomic ordering of $\sigma$- VFe phase.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2004.11a
• /
• pp.290-295
• /
• 2004

Along with social changes, school buildings are getting complex and diversified unlike the past. However, objective data analysis on construction costs fall short. In particular, ordering agencies are in a great need of objective and practical construction cost management for on-budget construction and procurement of quality goods. This paper analyzes the design diagram for a newly built school with an order from the Daejeon Metropolitan Office of Education, and compares the analysis with those of other kinds of buildings. The results are: the total construction cost of one school unit is 8,017,596,000 won on average; the cost is in the order of building, machinery and equipment, electricity, communications and civil engineering; as to activity, RC construction takes account of $30.3\%$ of the total construction cost. 1'he cost of school construction per M2 is 838,000 won, which is 6th highest of 11 kinds of constructions and slightly lower than 950,000 won, the average price of comparative constructions. When it comes to the percentage, school building takes mote percentage of the total cost than comparative building while machinery and equipment, electricity and communications takes slightly less percentage. Through simple regression analysis of gross coverage, this paper suggests a model formula with which the total construction cost, construction cost in accordance with activity, how much main construction materials are to be used are predictable.

• Spatial Information Research
• /
• v.17 no.2
• /
• pp.201-212
• /
• 2009

As GIS analysis method began to be introduced in late 1980's, studies of land development applying the GIS also started to be proceeded in various fields. Since 2003, Land Suitability Assesment has been adopted in order to prevent national land from development thoughtless for the environment and to plan appropriate national land management in terms of green development. Land Suitability Assessment System II based on diverse GIS analysis method such as Contour Analysis, Overlay Analysis, Network Analysis was particularly adopted to draft plans of specifying and altering of exclusionary zoning as well as installing and maintaining of urban planning facilities. But there has been a lot of problem, like an inaccurate basic data and assessment indicators, unmatched threshold, and contradicted evaluation result between each evaluating systems. Even though it is suited to an evaluation criteria, grade distribution is applied to start at 20, and development-centered evaluation result is offered. Now, we observed how suitability values and grading were changed, ordering to change grade distribution system from $20{\sim}100$ to $0{\sim}100$. In result, it showed changes of grades in some parcels. And in case of suitability values, 87% of parcels decreased to minimum 1 point, maximum 70 points. It means that changing grade distribution system of assessment system II doesn't have only influence on suitability values and grading but it is also an empirical analysis because of considering both development and maintenance.

• Korean Journal of Construction Engineering and Management
• /
• v.8 no.5
• /
• pp.101-108
• /
• 2007

To execute a construction project, many construction participants are engaged in the project. Especially many subcontactors role is very important, but their contract statute seems weaker rather than prime contractor. So to protect the subcontractor and to activate fair subcontract, Fair Transactions in Subcontracting Act was enacted. Direct payment to subcontractor clause of the act can protect subcontractor from the fear of insolvency of prime contractor, on the other hand can cause dispute about the interpretation of defect liability. Therefore the positive act and regulation were examined, and the effects of direct payment to subcontractor were analyzed. And the treatment direction of direct payment were suggested in this paper. Summary is as follows; (1) Statute of subcontractor for the ordering subject must be considered (2) Contract relationship must be reflected in the performance bond, subcontract bond, and subcontract construction conditions (3) To clarify the defect liability for the direct payment, retainage to guarantee the repair during contract period may be reflect on the subcontract construction conditions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.489-492
• /
• 2005

We report new polymer stabilized ferroelectric liquid crystal (PSFLC) cells with mechanical stability which is achievable by introducing photospacers in the cells. It was found that the mechanical st ability of the PSFLC cell was effected by introduction of photo spacers. We analyzed the dependence of mechanical stability and memory property on the density of photospacers in the PSFLC cell. The stability and memory properties of PSFLC Cells depending on photospacer density are discussed. 1. Introduction Recently, flexible displays have attracted much attention because they have remarkable advantages: thinner, lighter, non-breakable and conformable features. Flexible displays have various potential applications such as e-book and e-paper displays utilizing the distinct features. E-book and E-paper displays demand very low power consumption, so that bistable memory liquid crystal modes are required in case of flexible plastic LCDs for those application. Three kinds of memory LC modes have been developed; bistable nematic, bistable cholesteric and bistable FLC. Among them SSFLC as one of bistable FLC has big advantages such as low driving voltage, wide view angle and fast response time, SSFLC cells are, however, very weak against mechanical shock. Polymer stabilized FLC (PSFLC) has been developed to overcome the poor mechanical stability of SSFLC. PSFLC was known to have network structure that FLCs are oriented with smectic layer ordering in polymer network. The polymer network stabilizes the FLC orientation, which leads to improvement of mechanical stability of PSFLCD. A lot of studies have been done for the application of PSFLC to flexible $LCDs.^{[1{\sim}12]}$ However, it should be noted that PSFLC does not have sufficient mechanical stability for the particular applications such as smart card LCD, where LCD is highly bendable.Bead spacer was mainly used to maintain cell gap of conventional PSFLCDs. But the spacer density of it is not locally uniform in the cell, so that it is generally difficult that the PSFLCDs with bead spacers show sufficient mechanical stability. In order to more improve the mechanical stability of PSFLCDs, we introduced photospacers into PSFLCDs. In this paper, we describe the improvement of mechanical stability by introducing photospacers into PSFLCDs.