• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.27-27
• /
• 2023

To analyze the evolution of water resources in Qiandao Lake Basin under the condition of climate change, a WEP-L distributed hydrological model was established to simulate the water cycle process in the basin during 1960-2020. The Mann-Kendall non-parametric test method and Hurst index method were used to analyze the inter-annual variation and annual distribution characteristics of the total water resources in the basin. The multi-scale temporal and spatial distribution and evolution trend of water resources in Qiandao Lake Basin were evaluated. The results show that: (1) The WEP-L model has good simulation results in the Qiandao Lake basin, and the Nash coefficient rate is above 0.83 in the periodic period and above 0.85 in the verification period. (2) The water yield coefficient of the whole basin ranges from 0.436 to 0.630. The annual average total water resource is 12.25 billion m³, equivalent to 1176.4mm of water depth. The annual distribution process shows a unimodal structure, and the water depth of each sub-basin ranges from 742 mm to 1266 mm, and the spatial distribution is higher in the west and lower in the east. (3) The annual water resources series in the basin showed an insignificant upward trend, and the Hurst index was 0.86, indicating a continuous upward trend. From the perspective of monthly water resources, January and February increased significantly, the other months were not significant changes.

• Nuclear Engineering and Technology
• /
• v.51 no.6
• /
• pp.1487-1503
• /
• 2019

The methods and performance of a pin-level nuclear reactor core thermal-hydraulics (T/H) code ESCOT employing the drift-flux model are presented. This code aims at providing an accurate yet fast core thermal-hydraulics solution capability to high-fidelity multiphysics core analysis systems targeting massively parallel computing platforms. The four equation drift-flux model is adopted for two-phase calculations, and numerical solutions are obtained by applying the Finite Volume Method (FVM) and the Semi-Implicit Method for Pressure-Linked Equation (SIMPLE)-like algorithm in a staggered grid system. Constitutive models involving turbulent mixing, pressure drop, and vapor generation are employed to simulate key phenomena in subchannel-scale analyses. ESCOT is parallelized by a domain decomposition scheme that involves both radial and axial decomposition to enable highly parallelized execution. The ESCOT solutions are validated through the applications to various experiments which include CNEN $4{\times}4$, Weiss et al. two assemblies, PNNL $2{\times}6$, RPI $2{\times}2$ air-water, and PSBT covering single/two-phase and unheated/heated conditions. The parameters of interest for validation include various flow characteristics such as turbulent mixing, spacer grid pressure drop, cross-flow, reverse flow, buoyancy effect, void drift, and bubble generation. For all the validation tests, ESCOT shows good agreements with measured data in the extent comparable to those of other subchannel-scale codes: COBRA-TF, MATRA and/or CUPID. The execution performance is examined with a mini-sized whole core consisting of 89 fuel assemblies and for an OPR1000 core. It turns out that it is about 1.5 times faster than a subchannel code based on the two-fluid three field model and the axial domain decomposition scheme works as well as the radial one yielding a steady-state solution for the OPR1000 core within 30 s with 104 processors.

• Microbiology and Biotechnology Letters
• /
• v.23 no.6
• /
• pp.659-664
• /
• 1995

To improve stability of recombinant DNA pLC1 encoding endoglucanase gene and pGL1 encoding $\beta $-glucosidase gene, DNA fragments of genes coding endoglucanase and $\beta $-glucosidase were cloned within the recA gene on a pDR1453, and the pDRE10 and pDRG20 of recombinant plasmids were integrated into the recA gene on the E. coli 1100 chromosomal DNAs. The stability of inheritance was completely maintained in E. coli 1100; Transformants E. coli 1100/pDREIO and pDRG20 were expressed well by recA promoter and increased endoglucanase and $\beta $-glucosidase activities. This method can be used as a model to improve the stability of recombinant plasmid in large scale culture.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.3
• /
• pp.261-267
• /
• 2020

This study used a real-scale model experiment to reproduce internal fires in residential buildings such as a multi-dwelling unit, in order to prevent damage caused by tens of thousands of fires witnessed each year and to take measures to cope with them. For experimental conditions, different opening sizes were applied to measure and analyze the heating temperature of the exterior wall. Results drawn are as following: when the experiment was conducted with opening sizes(horizontal length) each at 2,000mm, 1,600mm, and 1,400mm, the flashover occurred at 630 seconds, 505 seconds and 510 seconds, respectively. Also, the total heating time, in proportion to this, came to 815 seconds, 713 seconds and 721 seconds. The maximum heating temperature of the exterior wall by the opening size reached 282.4℃ at 2,000mm, 382.9℃ at 1,600mm, and 423.8℃ at 1,400mm. This represented that as the opening size gets smaller, the heating temperature of the exterior wall by fire spread becomes higher.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.43 no.1
• /
• pp.1-11
• /
• 2007

It is the basic studies for productivity improvement and laborsaving of purse seine fishery. Because the seine shape is apt to be transformed in seine shooting process due to the effect of tide, this study is intended to establish 4 steps, whose flow velocity are 0, 2, 4 and 6cm/sec, in flume tank and perform the experiment to review the character. We used two model seines designed on the scale of 1 to 180 based on the power block seine, which is the mackerel purse seine generally used in the near sea of Jeju Island and triplex seine, which is the mackerel purse seine of one boat system fishing expected in the future, for the experiment, analyzed of the sinking movements on the two seines and its results are as follows. In the setting over the flow velocity 6cm/sec, experiment was impossible because of flying and transformation of seine were severe. The sinking movements of P seine and T seine generally showed linear phenomenon and the sinking speed showed gentle curve shape. Sinking tendency was distinguished by existence of flow velocity. When there is flow velocity, it showed the phenomenon that it sinking by similar type. Although sinking depth and sinking speed did not show distinguished classification, P seine shows bigger than T seine. When there was in flow velocity, the elapsed time(Et) and sinking depth (PDp, TDp) of P seine and T seine can be shown such experimental equations as PDp=(0.21V+4.96)Et-(0.62V-0.10) and TDp=(0.19V+4.95)Et-(0.72V+0.34). When there was in flow velocity, the elapsed time and siking speed (PSp, TSp) of P seine and T seine can be shown such experimental equations as $PSp=-0.11Et^2+1.42Et+1.75\;and\;TSp=-0.11Et^2+1.41Et+1.37$.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.05a
• /
• pp.1-4
• /
• 2001

A new non-destructive fatigue prediction model of the composite laminates is developed. The natural frequencies of fatigue-damaged laminates under extensional loading are related to the fatigue lift of the laminates by establishing the equivalent flexural stiffness reduction as a function of the elastic properties of sublaminates. The flexural stiffness is derived by relating the $90^{\circ}$-ply elastic modulus reduction, and using the laminate plate theory to the degraded elastic modulus and the intact elastic modulus of other laminate. The natural frequency reduction model, in which the dominant fatigue mode can be identified from the sensitivity scale factors of sublaminate elastic properties, provides natural frequency vs. fatigue cycle curves for the composite laminates. Vibration tests were also conducted on $[\textrm{90}_{2}\textrm{0}_{2}]_s$ carbon/epoxy laminates to verify the natural frequency reduction model. Correlations between the predictions of the model and experimental results are good.

• The Journal of Fisheries Business Administration
• /
• v.46 no.2
• /
• pp.111-125
• /
• 2015

This study is to analyze the efficiency of Korean sea food manufacturing using Data Envelopment Analysis. Firstly, based on an output oriented traditional CCR, BCC model, the study estimated the efficiency scores. The average estimates of technical, pure technical, and scale efficiency turned out 0.6517, 0.7184, 0.9074 respectively, which are separated for 50 marine corporations. The 10 DMUs were efficient under CCR model while the 17 DMUs under BCC model. Also, the study suggested that the operating profit of the two output factors should be more increased relatively and averagely from the viewpoint of efficiency improvement. Secondly, super efficiency scores are estimated under super efficiency and SBM model. As a result, it came to be possible to distinguish and rank the efficiency of the efficient DMUs. The highest score was 4.2975 under Super-CCR, was 2.4947 under Super-BCC, was 2.7160 under SBM-Super-CCR, and was 1.5319 under SBM-Super-BCC model. The average estimates of super efficiency were 0.76 and 0.82 under Super-CCR and Super-BCC model respectively, and were 0.61 and 0.67 under SBM-Super-CCR and SBM-Super-BCC model. Finally, the study conducted a rank-sum test, Wilcoxon-Mann-Whitney test, to find a statistical significance of heterogeneity existing in efficiencies among the sample corporations. The result showed that there was a significant difference in average efficiency between Dried, Salted product manufacturing and Frozen product manufacturing under BCC-Super efficiency model at 10% level of significance. Furthermore, TOBIT model was applied to find out the potential factors that might influence the efficiency, Wilcoxonand the results showed debt and sales cost influenced all of the technical, pure technical, and scale efficiency, while net profit influenced only the technical efficiency.

• Korean Security Journal
• /
• no.42
• /
• pp.37-57
• /
• 2015

The purpose of this study was to verify goodness-of-fit by Many-Facets Rasch model for applying martial arts training satisfaction scale to security martial arts trainees. To achieve the purpose, 255 security martial arts trainees' data were used in the analysis. In addition, In addition, the AMOS 20.0 program was used for unidimensionality validation, and take advantage of the Facets 3.61 program for goodness-of-fit verification. Specific results are as follows: First, Unidimensionali test results showed that model fit, reliability and standardized ${\beta}$ value are suitable. Second, the analysis results of goodness-of-fit, items 1, 2, 3 are inadequate, 4, 8, 11, 13, 14 items once found to be over-fit questions. Also, analysis of item difficulty, item 1 has highest difficulty and item 7 was lowest. Third, According Facets item difficulty and response difference verification result, female group exhibited a high level of item difficulty compared to the male group, goodness-of-fit was all accurate. As the result of item difficulty and response difference verification based on Martial arts training flow, there is no response difference according to the training experience. On the other hands, less than 4 years to 5 years and less than 5 years to 6 years trainees represented over-fit features. Results of item difficulty and response difference verification by grade level, first grade was the most highly recognized the item difficulty and fourth grade was also recognized the lowest of item difficulty Fourth, the response category analysis showed that the six points response categories are not appreciate.

• The Korean Journal of Elementary Counseling
• /
• v.9 no.2
• /
• pp.143-162
• /
• 2010

The purpose of this study is to construct Parent Attachment Scale for Children. Adapting the item consisting method used in Experiences in Close Relationships-Revised(ECR-R), Parent Attachment Scale for Children was constructed to measure child's attachment style with their parent, reliably and validly. Also, reliability and item trait informations based on item response theory were reviewed. First preliminary items were derived from the original items of ECR-R and existing Attachment Inventories. These items were modified and complemented to be easier and keep the original meaning of each item. Second preliminary items were administrated to 4~6th grades students(N=576). Finally, Parent Attachment Scale for Children were consisted with 30 items based on two-parameter graded response model. Internal consistency ranges of the scales of Parent Attachment Scale for Children are as follows : Avoidance scale is .94~.96; Anxiety scale is .85~.88. Test-retest reliability ranges are as follows; Avoidance scale is .71~.80; Anxiety scale is .53~.68. Item discrimination and item information value were within an appropriated range. Hierarchical cluster analysis with Ward's Method revealed four types of attachment style : Secure, Dismissing, Preoccupied, Fearful. Other implications and limitations of this study were discussed.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.1 no.4
• /
• pp.11-20
• /
• 1997

The aseismic capacity of a traditional three-bay-straw-roof wooden house for rock site condition is quantitatively estimated. One 1/4 scale model was tested for the Nahanni Earthquake with peak ground accelerations from 0.1g to 0.6g. The natural frequency of the wooden house in elastic range is 1.66 Hz and 2.15 Hz in longitudinal and transversal direction, respectively. Damping ratio of the house in elastic range is 7%. The horizontal acceleration response of the house is significantly reduced compared with the input motion due to the nonlinear inelastic characteristics of the Sagae-machum joint of the frame. The traditional wooden house has high aseismic capacity in the rock site condition where high frequency contents of motion are predominant.