• 한국정보통신학회논문지
• /
• 제10권2호
• /
• pp.386-391
• /
• 2006

본 논문에서는 유니 플래너 급전구조를 갖는 V형 선형 테이퍼드 슬롯 안테나를 설계하였다. 설계에 사용한 유전체 기판은 두께가 0.762mm이고 비유전율이 3.0인 PTFE 기판이며 손실 탄젠트는 0.001이다. 또한 중심 주파수는 5.8GHz로 설계하였으며 급전선로의 실현은 Hammerstad에 의한 식을 사용 하였다. V-LTSA의 S11과 VSWR의 시뮬레이션 결과를 얻었으며 -10dB를 기준으로 할 때 대역폭은 약 4.3GHz이었고 VSWR은 약 1.8 Octave의 광대역 특성을 나타내었다.

• 한국도로학회논문집
• /
• 제14권5호
• /
• pp.201-206
• /
• 2012

PURPOSES: This study evaluated a measuring technique for tire-pavement interaction noise that uses a noble close proximity (NCPX) method as well as for noise level measured inside of a car (e.g., Inside Noise Level) in term of rumble strips constructed at a tall gate. METHODS: According to the measurements of NCPX and inside noise level (INL), 1/3 octave band frequency analysis and overall noise level calculation were conducted in order to evaluate noise levels of NCPX and INL, depending on types of rumble strips. RESULTS: The tested sections of general concrete pavement surface and two different types of rumble strips were evaluated, using 1/3 octave band frequency analysis and overall noise level. From the analyzed results, it can be concluded that rumble strips generate a relatively huge noise levels when compared to the concrete pavement surface. CONCLUSIONS: Noting that above 3 dBA different noise levels can let drivers know that they are getting close to toll gate; therefore, they should apply their brakes. Thus, the noise levels of rumble strips are required to be reduced, based on considering the neighbors living near toll gates.

• 한국도로학회논문집
• /
• 제15권6호
• /
• pp.61-68
• /
• 2013

PURPOSES : The purpose of this study is to study the noise reducing effect of Micro Surfacing by comparing general asphalt, longitudinal tining and Slurry Seal. METHODS : This study measures vehicles' noise of each section by the NCPX method that can measure noise between the road surface and the tire at the field. Total sound pressure and sound pressure level by the 1/3 octave band frequency are calculated through the field data of each section. Total sound pressure level is compared by ANOVA test statistically. After ANOVA test, post-hoc test is conducted to know mean difference of surface type by Tukey. RESULTS : As the result of CPB analysis to confirm sound pressure levels by frequency, it was shown that sound pressure levels by frequency are totally similar except for those of frequency bands between 100Hz and 500Hz. The result of ANOVA test and post-hoc test, it was shown that sections of surface type have a difference. The result of Micro Surfacing was lower 2~5dB(A) than other surface type. CONCLUSIONS : It is found that the noise reduction performance of Micro Surfacing was better than other surface type.

• International Journal of Railway
• /
• 제2권4호
• /
• pp.152-163
• /
• 2009

In this paper, the correlation between the accelerations measured at the track components and the parameters affecting the acceleration is analyzed. To do it, the accelerations of each track component such as rails, sleepers and ballast are measured in Kyong-Bu high-speed Line. The RMS values of the measured accelerations are calculated and the pad stiffness, the longitudinal irregularity, running velocity and the corrugation, are considered as the parameters affecting the acceleration. By using the linear regression, the correlation coefficients are calculated to analyze the relationship between the acceleration characteristics and the parameters. Also, the 1/3 Octave analysis is calculated to analyze the dominant frequency band of the accelerations of the track components.

• 한국음향학회지
• /
• 제1권1호
• /
• pp.76-81
• /
• 1982

To get minimum noise level by making full use of the constrained geometric space and being compatible with the minimum pressure-drop condition, 3-pipe through-flow system is designed by inserting a new pipe which is shaped a resonator in the cavity of 2-pipe system. As a result of the 1/3-octave-band frequency analysis for the noise reduction characteristics, this system is proved to have good sound attenuation effect in the high frequency region, so that it is found to be a useful component of a muffler.

• 한국음향학회지
• /
• 제20권3호
• /
• pp.98-103
• /
• 2001

인간의 청각기관은 소리의 방향과 거리인지에 있어서 여러 가지의 정보들을 복합적으로 이용한다. 이러한 양 귀에 들어오는 소리세기의 차이, 위상의 차이, 그리고 주파수 스펙트럼의 차이 등의 정보들을 종합적으로 포함하고 있는 것이 머리전달함수이다. 본 논문에서는 이 머리전달함수를 이용한 3차원 음상정위를 위해 사람의 청각기관에 알맞은 1/3-옥타브 대역통과필터를 이용한 알고리즘을 제안한다. 먼저 측정된 머리전달함수의 음색왜곡 및 음질저하를 최소화하기 위해 1/3-옥타브 대역통과필터를 이용해 간략화시켰으며, 간략화된 데이터베이스를 크기와 시간의 부분으로 나누어 모듈을 구성하였다. 이의 성능평가를 위해 객관평가와 주관평가를 실시하였으며, 실험결과 85.7％정도의 음상정위의 성능 개선을 가져왔다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.185-190
• /
• 2000

The sound absorption coefficient of glass wool (bulk density of 48 kg/$m^3$ and 32 kg/$m^3$) was measured by reverberation room method as varying their cross-sectional area. The results show that the absorption is larger for smaller samples because of edge effect. The absorption coefficient with two different kinds of sources, 1/3-octave band and white noise, gives similar values.

• 한국철도학회논문집
• /
• 제10권5호
• /
• pp.463-472
• /
• 2007

본 논문에서는 궤도 각 부의 가속도 특성과 가속도에 영향을 미치는 인자들과의 상관관계를 분석하였다. 이를 위해서 경부고속철도 자갈궤도에 대해서 레일, 침묵, 자갈도상의 진동가속도를 측정하였다. 측정된 가속도에 대해서 실효치(RMS)를 분석하였으며 궤도의 진동에 영향을 미치는 매개요소로 패드강성, 고저틀림, 주행속도 및 요철을 고려하였다. 진동가속도와 매개요소들과의 상관관계 분석을 위해서 선형회귀식을 적용하였으며, 이를 통해서 상관계수를 도출하였다. 또한 가속도의 주파수 특성을 분석하기 위하여 1/3 옥타브 해석을 실시하였다.

• 한국도로학회논문집
• /
• 제15권4호
• /
• pp.95-105
• /
• 2013

PURPOSES: The purpose of this study is to research the influence of road traffic noise by road slope through the analysis of the field road traffic noise and determine consideration of road slope in the case of appling active noise cancellation. METHODS: This study measures vehicle's noise by the NCPX method at the three field sections such as uphill, downhill, and flatland. Total sound pressure and sound pressure level by the 1/3 octave band frequency are calculated through the raw field data. Total sound pressure level is compared by ANOVA test and T test statistically. The results obtained are compared in accordance with the road slope and the progress of the uphill section. RESULTS : The noise characteristic of early, medium, and last parts of uphill was found to be consistent when the vehicle was travelling uphill section. The result of statistical test, it was shown that total sound pressures are not different each other. According to the comparison by the geometry, sound pressure of the uphill section was higher than those of the flatland and downhill section in high frequency band. By the result of statistical test, total sound pressure are different according to geometry in the case of high vehicle speed. In the comparison result by road slope, each sound pressure level was found to be consistent in total frequency. However, total sound pressure proportionally increased according to road slope. CONCLUSIONS: It is found that the effect of road slope on noise generation was little in this experimental sites.

• 대한전자공학회논문지
• /
• 제18권6호
• /
• pp.23-29
• /
• 1981

마이크로스트립선로에 슬롯트선로를 결합시켜 평면형 광변역 balun을 설계, 제작하였다. 특히 C-band(4-8 GHz)에서 완전하게 동작시키기 위하여 슬롯트선로의 특성임피던스를 보상하여 주었으며, 이로써 이론치와 일치되는 결과를 얻을 수 있었다. 즉. 2 : 1의 부하저항에 대하여 Chebyshev 3-section 변환기로 정합회로를 구성한 결과. 3.5GHz∼7.0GHz의 1 -octave 대역에서 1.2 : 1 이하의 V.S.W.R.을 얻었으며 전송손실은 0.9dB까지 측정되었다. 특히 평형출력의 위상차는 180°±5°이내에서 linear 하게 변화하는 특성을 보이고 있다.