• Microbiology and Biotechnology Letters
• /
• v.22 no.4
• /
• pp.423-429
• /
• 1994

A bacterial strain which formed a distinct colony on agar plate containing naphthalene as a vapor phase and grew well ina liquid minimal medium was isolated and identified as Alcaligenes sp. A111. Optimum temperature and pH for the cultivation of Alcaligenes sp. A111 were 30$\cir$C and 7.0, respectively. Cell growth increased dramatically from 12 hours after inoculation and revealed a stationary phase at about 48 hours. Relative growth rate ($\mu$')increased hyperbolically depending on the conceration of naphthalene up to 500 ppm and reached to the maximum value pf 2.8/day, but $\mu$' didn't change within a range of 500~4000 ppm naphthalene. NH$_{4}$Cl or NH$_{4}$NO$_{3}$ was preferrd as a nitrogen source and a P : N ratio by weight og 6 : 1 was favorable to cell growth. Alcaligenes sp. A111 utilized the intermediates of degradation of naphthalene and showed tolerance to benzene, toluene, and octane. therefore, it is suggested that Alcaligenes sp. A111 could be effectively used for the biological treatment of wastewater containing naphthalene in the presence of some aromatic compounds.

• Magazine of the Korea Concrete Institute
• /
• v.6 no.4
• /
• pp.85-91
• /
• 1994

In the previous study, naphthalene and /or naphthol were sulfonated wlth sulfuric acid and they were condensated with formaldehyde. The condensates prepared are subjected to the flow and strength tests of cement rnortnr to examine the chemcal effects of cement adrnlxtures. As the results of flow test, the flow of cement mortar mxed wth naphthol condensates(TSC) and naphthol naphthalene cocondensates( NT5) was larger than those mxed with synthetic naphtha lene condensate (NSS). In the experiments of compressive strength after 28 days curing, the hardned cement mortar containing naphthalene naphthol condensates(N1'5) showed a higher compressive strength than those contairung naphthalene condensates(NSS) and naphthol condensates('I'SC). As a results, the synthetic naphthalene condensates(NT5, TSC 1, whlch used i n this study, are greatly expected as good superplasticizers for the concrete.

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.3
• /
• pp.317-327
• /
• 2009

In this study DMT(Dimethylterephthalate), NDC(Dimethyl-2, 6-Naphthalene Dicarboxylate) were used to synthesize polyester polyol which shows enhanced storage stability, improved flame retardancy, and good compressive strength. If DMT and NDC react respectively with DEG(Diethylene Glycol) which is kind of linear diol, the obtained polyester polyols tend to crystallize easily after the reaction. In case of DMT, PA(Phthalic Anhydride) which has asymmetric structure was introduced to retard the crystallization. In case of NDC, DPG(Dipropylene Glycol) which has an methyl side chain was introduced to prevent the crystallization. It was found that to introduce DPG was much more effective method to prevent the crystallization than PA. NDC and DMT were reacted together with DPG for various compositions of NDC:DMT(8:2, 6:4, 4:6 mol ratio). The obtained NDC-DMT-DPG based polyester polyol showed improved flame retardancy, and good compressive strength with increasing the content of NDC.

• Korean Journal of Plant Resources
• /
• v.22 no.1
• /
• pp.26-30
• /
• 2009

Daucosterol and naphthalene glycoside were isolated from the seeds of Cassia mimosoides var. nomame Makino. The isolated compounds were identified by spectral means including 1D, 2D-NMR and FAB-MS experiments. Daucosterol was characterized as ${\beta}$-sitosterol-3-O-${\beta}$-D-glucoside and naphthalene glucoside was done as 2-acetyl-3-methyl-6-methoxynaphthalene-1,8-diol 8-O-glucosyl-(1${\rightarrow}$6)-glucoside. These compounds were isolated for the first time from Cassia mimosoides var. nomame Makino.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.313-316
• /
• 2013

• Bulletin of the Korean Chemical Society
• /
• v.26 no.6
• /
• pp.943-946
• /
• 2005

An effective spectrophotometric determination of palladium with 4-(2-pyridylazo)-resorcinol (PAR) using molten naphthalene as a diluent has been studied. A red complex of palladium with PAR is formed at 90 ${^{\circ}C}$. In the range of pH 9.0-11.0, the complex is quantitatively extracted into molten naphthalene. The organic phase is anhydrously dissolved in $CHCl_3$ to be determined spectrophotometrically at 520 nm against the reagent blank. Beer’s law is obeyed over the concentration range of 0.1-2 ${\mu}g{\cdot}mL^{-1}$. The molar absorptivity and Sandell’s sensitivity are 8.0 ${\times}\;10^5\;L{\cdot}mol^{-1}{\cdot}cm^{-}1\;and\;0.49\;{\mu}g{\cdot}cm^{-2}$ respectively. From the results of tolerance limits, it was found that there was no interferences were observed for most of the ions examined and those somewhat high interferences by Co(II), Fe(II) and Bi(III) could be effectively masked by EDTA.

• Advances in environmental research
• /
• v.1 no.3
• /
• pp.201-210
• /
• 2012

The bioavailability of sorbed organic contaminants is one of the most important factors used to determine their fate in the environment. This study was conducted to evaluate the bioavailability of slow-desorbable naphthalene in soils. An air sparging system was utilized to remove dissolved (or desorbed) naphthalene continuously and to limit the bacterial utilization of dissolved naphthalene. A biological air sparging system (air sparging system with bacteria) was developed to evaluate the bioavailability of the slow-desorption fraction in soils. Three different strains (Pseudomonas putida G7, Pseudomonas sp. CZ6 and Burkholderia sp. KM1) and two soils were used. Slow-desorbable naphthalene continuously decreased under air sparging; however, a greater decrease was observed in response to the biological air sparging system. Enhanced bioavailability was not observed in the Jangseong soil. Overall, the results of this study suggests that the removal rate of slow-desorbable contaminants may be enhanced by inoculation of degrading bacteria into an air sparging system during the remediation of contaminated soils. However, the enhanced bioavailability was found to depend more on the soil properties than the bacterial characteristics.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.10
• /
• pp.1593-1596
• /
• 2006

The polymeric membrane electrodes based on N,N'-bis-pyridin-2-ylmethylene-naphthalene-1,8-diamine as an ion carrier were prepared and tested for the copper-ion selective electrode. The membrane has a linear dynamic range between $10^{-6}$ and $10^{-2}$ M with a Nernstian slope of 29.6 mV per decade, and its detection limit was $10^{-5.62}$M. The potentiometric response is independent of the pH range of 3-5. The proposed electrode showed good selectivity and response for $Cu^{2+}$ over a wide variety of other metal ions in pH 4.0 buffer solutions.

• Elastomers and Composites
• /
• v.40 no.1
• /
• pp.37-44
• /
• 2005

Novel polyurethanes containing no mesogenic unit were synthesized by the polyaddition reaction of para-type diisocyanates such as 2,5-tolylene diisocyanate (2,5-TDI) or 1,4-phenylene diisocyanate (1,4-PDI) with 2,6-bis(${\omega}$-hydroxyalkoxy)naphthalene (BHNm; m= 5, 6, 8, 11). Intrinsic viscosities of the polymers were in the range of 0.28-0.43 dL/g. The thermal properties of these polymers were studied by differential scanning calorimetry and polarizing microscopy. Polyurethanes prepared from BHNm and 2,5-TDI haying methyl substituent on the phenylene unit exhibited monotropic liquid crystallinity. However, in the series of polyurethanes prepared from 1,4-PDI and BHNm, no explicit mesomorphic behavior was observed by differential scanning calorimetry and polarizing microscopy.

• Environmental Engineering Research
• /
• v.17 no.2
• /
• pp.89-94
• /
• 2012

Pyrolysis/gasification technology utilizes an energy conversion technique from various waste resources, such as biomass, solid waste, sewage sludge, and etc. to generating a syngas (synthesis gas). However, one of the major problems for the pyrolysis gasification is the presence of tar in the product gas. The tar produced might cause damages and operating problems on the facility. In this study, a gliding arc plasma reformer was developed to solve the previously acknowledged issues. An experiment was conducted using surrogate benzene and naphthalene, which are generated during the pyrolysis and/or gasification, as the representative tar substance. To identify the characteristics of the influential parameters of tar decomposition, tests were performed on the steam feed amount (steam/carbon ratio), input discharge power (specific energy input, SEI), total feed gas amount and the input tar concentration. In benzene, the optimal operating conditions of the gliding arc plasma 2 in steam to carbon (S/C) ratio, 0.98 $kWh/m^3$ in SEI, 14 L/min in total gas feed rate and 3.6% in benzene concentration. In naphthalene, 2.5 in S/C ratio, 1 $kWh/m^3$ in SEI, 18.4 L/min in total gas feed rate and 1% in naphthalene concentration. The benzene decomposition efficiency was 95%, and the energy efficiency was 120 g/kWh. The naphthalene decomposition efficiency was 79%, and the energy yield was 68 g/kWh.