• 대한화학회지
• /
• 제48권2호
• /
• pp.156-160
• /
• 2004

LPG용 고압고무호스의 가소제 추출률에 대하여 연구하였다. 가소제 추출을 위한 침지용 용매는 프로판, n-부탄, n-펜탄, n-헥산, n-헵탄이며, 프로필렌, 1,3-부타디엔, 1-펜텐, 1-헥센, 에탄티올, t-부탄티올, 황화에틸메틸, 황화이메틸으로 조성되어 있다. 다중회귀분석으로 가소제 추출량과 침지용매의 설명인자사이의 상관관계를 다음과 같이 얻을 수 있었다. PE(wt%)=7.5193(${\pm}$0.2466) - 0.585000(${\pm}$0.05437)Carbon${\sharp}$ + 2.3294(${\pm}$0.1967)DB + 2364(${\pm}$896.2)SH (N = 13, F = 24.135, R$^2$ = 0.8894, R$_{adj}^2$ = 0.8526, Variance = 7.588) 증기압이 높고 극성도가 높은 조성의 LPG에 의하여 가소제는 많이 용출되었다. LPG에서 티올계 황화합물과 프로필렌이나 부타디엔 등의 불포화 탄화수소의 함량이 높아질수록 추출되는 가소제량은 증가한다. 반면에 큰 탄화수소일수록 고무로부터 추출된 가소제량은 적었다.

• 한국환경보건학회지
• /
• 제46권5호
• /
• pp.555-564
• /
• 2020

Objectives: To identify and investigate through qualitative and quantitative analysis the hazardous substances generated when compressed wood was burned at a live fire-training center. Methods: Four types of compressed wood that are actually used in live fire training were burned in a chamber according to KS F2271. The gaseous material was sampled with a gas detector tube and conventional personal samplers. Results: 1,3-butadiene, benzene, toluene, xylene, formaldehyde, hydrogen chloride, hydrogen cyanide, ammonia, carbon monoxide, and nitric acid were detected. In particular, 1,3-butadiene (497.04-680.44 ppm), benzene (97.79-125.02 ppm), formaldehyde (1.72-13.03 ppm), hydrogen chloride (4.71-15.66 ppm), hydrogen cyanide (3.64-8.57 ppm), and sulfuric acid (3.85-5.01 ppm) exceeded the Korean Occupational Exposure Limit as measured by sampling pump according to the type of compressed wood. Conclusions: We found through the chamber testing that firefighters could be exposed to toxic substances during live fire training. Therefore, firefighter protection is needed and more research is required in the field.

• 한국환경과학회지
• /
• 제8권1호
• /
• pp.45-50
• /
• 1999

깨끗한 모래로 채워진 4개의 16갤론 크기 드럼통에 주물 파이프가 설치되었고 각 파이프에는 3개의 styrene butadiene rubber gasket(1개의 joint와 2개의 end caps)을 장치하였다. 각 파이프는 상수로 채워 내부의 압력을 약 40psi로 유지하였다. 첫 번째 드럼은 일정량의 휘발유로, 두 번째 드럼은 pyrene과 naphthalene을 포함한 휘발유로, 세 번째 드럼은 toluene으로 채워졌고, 네 번째 드럼은 대조군으로 사용되었다. 외부 오염물질의 이동에 의한 오염을 조사하기 위해 일정 간격으로 파이프 내의 물을 약 2년 간 조사하였다. 오염 물질이 투입된 3개의 드럼에서 약 100일 후부터 유기 오염 물질이 검출되었고 외부에 채워진 유기물이 고갈될 때까지 계속적으로 증가하는 추세를 보였다. 이미 오염된 물을 깨끗한 물로 청소한 후에도 오염된 gasket에 남아있는 유기물질이 유출되어 파이프 내의 물이 쉽게 오염되었으며 약 10일 후에는 청소 이전의 농도로 검출되어 gasket에 의한 오염이 오래 동안 지속되는 것으로 나타났다.

• Bulletin of the Korean Chemical Society
• /
• 제31권9호
• /
• pp.2613-2617
• /
• 2010

Chloroprene is a chlorine substituent of 1,3-butadiene. Butadiene rubber (BR) and chloroprene rubber (CR) composites were thermally aged at 60, 70, 80, and $90^{\circ}C$ for 2 - 185 days in a convection oven and changes of the crosslink densities by the accelerated thermal aging were investigated. The crosslink densities increased as the aging time elapsed and as the aging temperature became higher. Degrees of the crosslink density changes of the BR composite were on the whole larger than those of the CR one except the short-term thermal aging at 60 and $70^{\circ}C$. The crosslink densities abnormally increased after themal aging at high temperatures for a long time. Activation energies for the crosslink density changes of the rubber composites tended to increase with increase of the aging time and the variation showed a local minimum. The activation energies of the CR composite were lower than those of the BR one. The experimental results were explained with a role of ligand of chlorine atom of CR in a zinc complex, steric hindrance by chlorine atom of CR, and oxidation of rubber chain.

• 멤브레인
• /
• 제18권3호
• /
• pp.256-259
• /
• 2008

본 연구에서는 poly(acrylonitrile-butadiene-styrene) (ABS)에 carbon graphite와 zeolite 4A를 첨가하여 복합 필름을 제조하고 공기와 수증기 투과 특성을 살펴보았다. 복합 필름의 경우 모든 경우에서 순수한 ABS에 비해서 산소와 질소의 투과도가 감소하였으며, 산소의 투과도 감소가 질소의 투과도 감소보다 약간 큰 관계로 산소/질소 선택도도 조금 감소하였다. 또한, 수증기 투과도도 순수한 ABS에 비해서 약 1/2로 감소하였다. 이러한 투과도의 감소는 ABS에 filler를 첨가함으로 인하여 물질 확산 경로의 tortuosity가 증가했기 때문인 것으로 생각된다.

• 통합자연과학논문집
• /
• 제3권1호
• /
• pp.24-27
• /
• 2010

Multi-functionalized rugate porous silicon (PSi) for biosensor was developed by hydrosilylation with silole and its further reaction with biotin groups. PSi was generated by an electrochemical etching of silicon wafer in aqueous ethanolic HF solution PSi prepared by using etching conditions showed that many sharp spectral lines can be obtained in the optical reflectivity spectrum. 1,1-hydrovinyl-2,3,4,5-tetraphenylsilole was obtained from the reaction of 1,1-dilithio-2,3,4,5-tetraphenyl-1,3-butadiene with dichlorovinylsilane. Multi-functionalized PSi with silole and biotin groups was characterized by UV-vis absorption spectroscopy, Ocean optics 2000 spectrometer, and fluorescence spectroscopy. Optical characteristics such as reflectivity and photoluminescence (PL) were observed. An increase of the reflection wavelength in the reflectivity spectrum by 20 nm was observed, indicative of a change in refractive indices induced by hydrosilylation of the silole and biotin groups to the rugate PSi. This red-shift was attributed to the replacement of some of the Si-H group of fresh rugate PSi with silole and biotin group.

• Bulletin of the Korean Chemical Society
• /
• 제11권1호
• /
• pp.31-33
• /
• 1990

We synthesized the novel complexes of (1,1-dimethyl-3,4-diphenyl-1-silacyclopenta-2,4-di ene-2,5-yldibenzene)bis(tricarbonylchromium) and tricarbonyl (R,R'-3,4,5-triphenyl-1-silacyclopenta-2,4-diene-2 -ylbenzene)chromium(R,R' = Me, R = Me/R' = Cl, R = Ph/R' = Cl) from the reaction of the corresponding R,R'-2,3,4,5-Tetraphenyl-1-silacyclopenta-2,4-dien e (abr. R,R'-TPSCp) with chromiumhexacarbonyl. These results reveal that chromium prefer to coordinate to the phenyl substituents of 1-silacyclospentadiene rather than the butadiene moiety of the ring.

• 한국임상수의학회지
• /
• 제40권4호
• /
• pp.268-275
• /
• 2023

In this paper, we designed 3D-printed orthopedic splint models for patient-specific external coaptation on fracture healing and analyzed the stability of the models through finite element method (FEM) analysis under compressive load conditions. Polylactic acid (PLA) and acrylonitrile-butadiene-styrene (ABS) based 3D splint models of the thicknesses 1, 3, 5 and 7 mm were designed, and Peak von Mises stress (PVMS) and maximum displacement (MD) of the models were analyzed by FEM under compressive loads of 50, 100, 150, and 200 N. The FEM results indicated that PVMS and MD values, regardless of material, had a negative correlation with the thickness of the models and a positive correlation with the compressive load. There was a risk of splint deformation under conditions more extreme than 100 N with 5 mm thickness. For successful clinical application of 3D-printed orthopedic splints in veterinary medicine, it is recommended that the splint should be produced not less than 5 mm thickness. Also, it is expected to be stable when the splint is applied to situations with a compressive load of 100 N or less. There is an advantage of overcoming the limitations of the existing bandage method through 3D-printing technology as well as verifying the stability through 3D modeling before application. Such 3D printing technology will be widely used in veterinary medicine and various fields as well as orthopedics.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2005년도 공동추계학술논문발표회 논문집
• /
• pp.289-293
• /
• 2005

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2003년도 추계학술대회 논문집
• /
• pp.382-383
• /
• 2003

이동오염원에 의한 VOCs의 배출기여도를 산정 평가한 국내외의 자료에 따르면, 전체 VOCs 배출량 중 이동배출원에 의한 기여도는 미국이 26 ％, 유럽이 38 ％, 한국이 45 ％ 정도를 점할 정도로 비중이 큰 배출원으로서 주목을 받고 있다. 뿐만 아니라 배출성분 중에는 포름알데히드, 벤젠, 크실렌, 톨루엔, 1,3-butadiene 등과 같이 인체에 매우 유해한 성분이 상당수 포함되어 있기 때문에, 이들은 주관리 대상 배출원으로 간주되고 있다. (중략)