• Title/Summary/Keyword: 1,2-unit

검색결과 8,859건 처리시간 0.037초

Indoor exposure to hazardous air pollutants and volatile organic compounds in low-income houses in Lagos, Nigeria

  • Luqmon, Azeez;Musa, Olaogun;Mariam, Adeoye;Abdulazeez, Lawal;Babatunde, Agbaogun;Ibrahim, Abdulsalami;Adija, Majolagbe
    • Advances in environmental research
    • /
    • 제1권4호
    • /
    • pp.277-288
    • /
    • 2012
  • This study investigated exposure to air pollutants in rooms in low-income houses at Shomolu (R1), Mafoluku (R2) and Mushin (R3) in Lagos state. The concentrations of most measured exceeded limits of Illinois Department of Public Health (IDPH) for indoor air quality. Air quality index (AQI) in rooms studied was unhealthy for sensitive people in terms of CO, unhealthy in terms of $SO_2$ and very unhealthy in terms of $NO_2$ while moderate air quality was obtained in terms of $PM_{10}$ in most rooms. High concentrations of carbontetrachloride, formaldehyde and xylene measured could have been responsible for some of the health complaints of the occupants. Factor analysis shows that cooking with kerosene, use of gasoline generator and insecticide were the major contributors to indoor air pollution in these rooms. Therefore, there is need to urgently tackle poverty as all affected by these pollutants were poor who live in substandard houses without kitchens.

과학기술위성 2호 원격검침-명령 유닛 시험모델 설계 및 구현 (Engineering Model Design and Implementation of Telemetry-Command Unit for STSAT-2)

  • 오대수;유창완;남명룡;황동환
    • 한국항공우주학회지
    • /
    • 제33권5호
    • /
    • pp.93-98
    • /
    • 2005
  • 과학기술위성 2호 시스템 내의 각 전자 유닛(Unit)의 상태 정보를 원격검침(Telemetry)하고 원격명령(Telecommand) 내릴 수 있는 원격검침-명령 유닛(Telemetry-Command Unit, TCU)의 시험모델(Engineering Model, EM)의 개발을 완료하고 동작시험 결과를 제시하였다. TCU는 과학기술위성 1호와는 다르게 CPU가 없이 FPGA 만으로 구현하여 소형화, 경량화 및 저 전력화를 실현하고 기술 집약화를 이루었다. 본 논문에서는 TCU의 개념 설계를 소개하고 구현결과를 제시한다.

교외 산업단지지역 강우유출수내 비점오염물질의 유출특성 및 원단위 산정 (Washoff Characteristics of Non-point Source pollutants and Estimation of Unit Loads in Suburban Industrial Complex Areas Runoff)

  • 김성준;신선미;전용태;원찬희
    • 환경영향평가
    • /
    • 제21권2호
    • /
    • pp.315-325
    • /
    • 2012
  • The characteristics of stormwater runoff and estimation of unit loads were examined in suburban industrial complex areas. During rainfall event, the peak concentrations occurred within the first 100 minutes after rainfall and then the highest concentration of NPS pollutants sharply decreased, showing strong first flush effect in suburban industrial complex. The cumulative load curves for NPS pollutants showed above the straight line, indicating that first flush effect occurred in suburban industrial complex. While the mean TSS, BOD, COD, TN and TP EMCs values were shown the highest values as 120.6 mg/L, 20.8 mg/L, 44.0 mg/L, 5.58 mg/L and 1.46 mg/L respectively. Unit loads estimated from the EMCs were TSS $43.86kg/km^2/day$, COD $52.45kg/km^2/day$, BOD $24.79kg/km^2/day$, T-N $6.65kg/km^2/day$, T-P $1.75kg/km^2/day$, and Pb $0.10kg/km^2/day$. Results of unit loads were compared with the unit pollutant loads from land-use in Korea and USA. The unit load of TSS was lower than that of USA. Estimated BOD and T-N and T-P unit loads were lower than that of Korea.

고리 1호기 원자로 압력용기 절단과 포장 방법에 따른 처분 물량 산정 (Evaluation on Radioactive Waste Disposal Amount of Kori Unit 1 Reactor Vessel Considering Cutting and Packaging Methods)

  • 최유정;이성철;김창락
    • 방사성폐기물학회지
    • /
    • 제14권2호
    • /
    • pp.123-134
    • /
    • 2016
  • 최근 국내에서는 월성 1호기 및 고리 1호기를 포함하여 운영 중인 원자력발전소가 노후화함에 따라 원전 해체에 대한 관심이 많이 증대되고 있다. 이와 관련하여 월성 1호기의 계속운전이 최근 결정되었으며, 고리 1호기의 경우 2017년 6월 영구정지하기로 결정되었다. 이에 본 논문에서는 상업용 원자로로서는 국내 최초로 해체가 예정된 고리 1호기에 대해, 원자로 압력용기 자체의 해체로 인해 발생하는 방사성폐기물 최종 처분량을 원자로 압력용기 절단 방법 및 방사성폐기물 처분용기를 고려하여 산정하였다. 처분용기를 고려한 방사성폐기물 처분량을 산정한 결과 원자로 압력용기 몸통 부위보다는 반구 형태의 헤드 부분을 작게 절단할수록 최종 처분량이 감소하는 것으로 예측되었다. 또한 경주 방폐장의 200 L 및 320 L 드럼 처분용 처분용기의 경우 무게 제한으로 인해 적재효율이 좋지 못한 것으로 나타났다.

브랜드 아파트의 단위평면 각 실의 경향분석 (Tendency of Each Space of Unit Plans for Brand Apartments)

  • 오혜경;홍이경
    • 한국실내디자인학회논문집
    • /
    • 제20권1호
    • /
    • pp.128-137
    • /
    • 2011
  • This study aims to examine each space characteristics of unit plans for brand apartments. Through construction companies' web-sites and real estate web-sites, all the apartment unit plans with $66m^2{\sim}164m^2$ unit among the brand apartments were analyzed. On the analysis of the apartment unit plans($66m^2{\sim}164m^2$) provided by top 8 construction companies from March 2004 to December 2008. The remarkable changes compared to existing apartments include an increase in the number of bays; front side allocation of bedrooms beside the main bedroom; installation of a vestibule, a dressing room, and a powder room; installation of built-in closets in bedrooms beside the main bedroom; and installation of a receipt spot on the sidewall in the balcony. Besides, as for minor opinions there were opinions of front side allocation of kitchen/dining room, back side allocation of the main bedroom, and installation of dressing room in bedrooms beside the main bedroom. Therefore, construction companies should pay attention to research result about the unit area ranges of apartment unit plans, and reflect it positively to develop apartment unit plans to satisfy consumers.

시판 새우젓의 이화학적 특성 (Physicochemical Properties of Commercial Salrt-Fermented Shrimp)

  • 황종현;김진만
    • 한국식품영양과학회지
    • /
    • 제30권4호
    • /
    • pp.760-763
    • /
    • 2001
  • 시판되는 새우젓의 새로운 기능성 지표를 제시하고자 단백분해효소의 활성 및 키토산 분해활성 등을 측정하였다. 시판 되는 새우젓의 염도를 측정한 결과. 29.8~48.3%로 제품에 따라 최대 19% 정도의 염도 차이를 보였다. 총질소량은 3510.5 ~7314.1 mg/100g 으로 A시료가 7314.1 mg/100 g으로 가장 높은 총질소 함량을 보인 반면 D 시료는 3510.5 mg/100 g으로 비교적 낮은 총질소 함량을 보였다. 아미노태 질소량은 321.2~723.9 mg/100g으로 총질소 함량이 가장 낮았던 D시료가 아미노태 질소 함량이 낮았다. 5개 시판 새우젓의 평균 펩타이드 길이(average peptide length: APL)는 10.1~15.0이었다. 휘발성 염기질소는 14.1~98.6mg/100g 으로 D시료에서 가장 높은 98.6mg%의 함량을 보였다. 단백질 분해효소 활성은 18~232 unit로 차이를 보이고 있으며 C번 시료의 단백질 분해 효소 활성이 232 unit로 가장 높은 효소활성을 보였다. Chitinase 활성은 14.4~171 unit의 활성을 보였으며 E번 새우젓이 171 unit로 가장 높은 효소 활성을 보였다.

  • PDF

Structure-Antifungal Activity Relationships of Cecropin A-Magainin 2 and Cecropin A-Melittin Hybrid Peptides on Pathogenic Fungal Cells

  • Lee, Dong-Gun;Jin, Zhe-Zhu;Shin, Song-Yub;Kang, Joo-Hyun;Hahm, Kyung-Soo;Kim, Kil-Lyong
    • Journal of Microbiology and Biotechnology
    • /
    • 제8권6호
    • /
    • pp.595-600
    • /
    • 1998
  • In order to investigate a relationship of the structure-antifungal and hemolytic activities between cecropin A(1-8)-magainin 2(1-12) and cecropin A(1-8)-melittin(1-12) hybrid peptides, several analogues with amino acid substitution at positions 10 (Ile) and 16 (Ser) were designed and synthesized. The increase of the hydrophobicity by substituting with Leu, Phe, and Trp at position 16 in cecropin A(1-8)-magainin 2(1-12) did not have a significant effect on antifungal activity but caused a remarkable increase in hemolytic activity. These results indicate that the hydrophobic property at position 16 of cecropin A(1-8)-magainin 2(1-12) is more correlated to hemolytic activity than to antifungal activity. Replacement with Pro at position 10 of cecropin A(1-8)- magainin 2(1-12) and cecropin A(1-8)-melittin (1-12) caused a remarkable decrease in a-helical contents in the 50% TFE solution and induced a reduction in lytic activity against Aspergillus flavus, and Aspergillus fumigatus. These results demonstrate that flexibility at the central hinge region is essential for lytic activity against fungal cells and $\alpha$-helicity of the peptides.

  • PDF

치과 캐드/캠 시스템으로 제작된 지르코니아 single 코핑과 3-unit 구조물의 상대적 적합도 비교 (Comparison of relative fitness between zirconia single coping and 3-unit fixed partial dentures (FPDs) manufactured by dental CAD/CAM system)

  • 이완선;박종경;김욱태
    • 구강회복응용과학지
    • /
    • 제30권1호
    • /
    • pp.16-22
    • /
    • 2014
  • 목적: 본 연구의 목적은 동일한 모형에서 제작된 지르코니아 single 코핑과 3-unit 구조물의 변연 및 내면 적합도를 평가하는 것이다. 연구 재료 및 방법: 상악 우측 제2소구치가 상실되고 상악 제1소구치와 제2대구치가 지대치로 형성된 에폭시 모형(epoxy model)을 제작한 후 레이저 스캐너를 이용하여 스캔 하였다. CAD 소프트웨어를 이용하여 지르코니아 구조물을 디자인하고 CAM을 사용하여 지르코니아 single 코핑과 3-unit 구조물을 제작 하였다. 지르코니아 single 코핑은 상악 제1소구치, 제2대구치에서 각각 10개씩 제작 되었고 지르코니아 3-unit 구조물도 10개가 제작 되었다. 적합도 측정을 위하여 제작된 실리콘 복제(silicone replica)를 4등분하고 각 면의 측정 위치(P1, P2, P3, P4, P5)에서 디지털 현미경을 사용하여 적합도를 측정하였다. 각 위치에서 측정된 불일치 값들은 변연 불일치(MG, P1), 축 불일치(AG, P2와 P3의 평균), 교합 불일치(OG, P4와 P5의 평균)의 세 범주로 분류하였다. 결과: Single 코핑에서 변연 불일치의 범위는 18.47 - 40.54 ${\mu}m$, 축 불일치의 범위는 39.73 - 73.61 ${\mu}m$, 교합 불일치의 범위는 116.90 - 134.69 ${\mu}m$이었다. 3-unit 구조물에서 변연 불일치의 범위는 45.95 - 87.44 ${\mu}m$이고, 축 불일치의 범위는 23.78 - 57.00 ${\mu}m$이고, 교합 불일치는 99.89 - 131.06 ${\mu}m$이었다. 결론: 본 연구의 결과에 따르면 single 코핑에 비해 3-unit 구조물의 변연 불일치가 증가하였지만 임상학적 수용 범위(- 120 ${\mu}m$) 내에 있었으며 3-unit 구조물의 불일치 증가를 방지하기 위해서 더욱 균질한 지르코니아 블록 사용과 소결공정들을 조절해야 할 것이다.