• 청정기술
• /
• 제17권3호
• /
• pp.244-249
• /
• 2011

이산화탄소/프로필렌 옥사이드 공중합을 통하여 고분자 사슬 내에 친수성기와 소수성기가 공존하는 저분자량의 블록 공중 합체를 합성하였다. 고활성의 촉매를 사용한 이산화탄소/프로필렌 옥사이드 공중합 반응에 단말기로 -OH기를 갖는 폴리(에틸렌 글리콜)(PEG)을 분자량 조절제로 투입하여 블록 공중합체를 합성하였다. 단말기 한쪽 끝에만 -OH기를 갖는 폴리(에틸렌 글리콜)을 투입하였을 때는 PEG-block-PPC (폴리(프로필렌 카보네이트)) 다이블록 공중합체가 얻어지고, 단말기 양쪽 끝 모두 -OH기를 갖는 폴리(에틸렌 글리콜)을 투입하였을 때는 PPC-block-PEG-block-PPC 트리블록 공중합체가 얻어진다. 제조된 블록 공중합체는 $^1H$-NMR 스펙트럼을 통하여 구조 분석을 하였고 GPC를 통하여 분자량을 측정하였다.

• Archives of Pharmacal Research
• /
• 제25권3호
• /
• pp.392-399
• /
• 2002

The effects of vehicles and penetration enhancers on the in vitro permeation of melatonin through dorsal hairless mouse skin were investigated. Propylene glycol laurate (PGL), isopropyl myristate (IPM), propylene glycol monolaurate (PGML) and propylene glycol monocaprylate (PGMC) showed high permeation fluxes and PGL, PGML and PGMC decreased lag time significantly. In both of the binary co-solvents of diethylene glycol monoethyl ether (DGME)-PGL and DGME-IPM, the highest fluxes were achieved at 20% of DGME, which were $10.5{\pm}1.5$ and $9.1{\pm}2.4{\;}{\mu\textrm{g}}/cm^2/h$, respectively. Among fatty acids used as a permeation enhancer, capric acid and oleic acid in DGME-PGL (80:20 v/v) showed relatively high enhancing effects. Capric acid also shortened the lag time of melatonin from $2.4{\pm}0.7{\;}to{\;}1.3{\pm}0.2{\;}h$. Oleic acid, however, failed to shorten the lag time. Therefore, for effective solution formulations in terms of permeation flux and lag time, capric acid-containing DGME-PGL (80 : 20 v/v) could be used to enhance the skin permeation of melatonin.

• 폴리머
• /
• 제39권2호
• /
• pp.247-255
• /
• 2015

Poly(1,2-propylene glycol adipate) (PPA) was used as an environmentally friendly plasticizer in flexible poly(vinyl chloride) (PVC). Thermal, mechanical, and rheological properties of the PVC/PPA blends were characterized by differential scanning calorimetry, dynamic mechanical analysis, tensile test, scanning electron microscopy and small amplitude oscillatory shear rheometry. The results showed that PPA lowered the glass transition temperature of PVC. The introduction of PPA could decrease tensile strength and Young's modulus of the PVC/PPA blends; however, elongation-at-break was dramatically increased due to the plastic deformation. The plasticization effect of PPA was also manifested by the decrease of dynamic storage modulus and viscosity in the melt state of the blends. The results indicated that PPA had a good plasticizing effect on PVC.

• 한국환경보건학회지
• /
• 제39권6호
• /
• pp.483-491
• /
• 2013

Objectives: Electronic cigarettes are battery powered devices that convert a nicotine-containing liquid into an inhalable vapor. The device aerosolizes nicotine so that it is readily entrained into the respiratory tract, from where it enters the bloodstream. Information on the safety of E-cigarettes is required. Methods: Seventeen articles on studies analyzing toxic substances in the liquid and gas phases of electronic cigarettes were reviewed. Results: Tobacco-specific nitrosamines, bis(2-ethylhexyl) phthalate, formaldehyde and acetaldehyde, known to be carcinogenic agents in humans or animals, were detected in the liquid and gas phases. In addition, diethyl phthalate, acetone, ethanol, cresol, xylene, propylene, styrene, triethylene glycol, tetraethylene glycol, pentaethylene glycol cis-3-hexen-1-ol, methyl cinnamate and undecane were identified in the liquid and gas phases of E-cigarettes. Propylene glycol, glycerin, 1-methoxy-2-propanol, 1-hydroxy-2- propanone, acetic acid, 1-menthone, 2,3-butanediol, menthol, carvone, maple lactone, benzyl alcohol, 2-methyl-2-pentanoic acid, ethyl mantel, ethyl cinnamate, myosamine, benzoic acid, 2,3-bipyridine, cotinine, hexadecanoic acid, and 1'1-oxybis-2-propanol were detected in the vapors of E-cigarettes. Conclusion: The hazardous compounds identified in the liquid and gas phases of E-cigarettes should be controlled for the lowest concentrations in the raw materials and production procedures.

• 한국연초학회지
• /
• 제27권1호
• /
• pp.31-39
• /
• 2005

This study was conducted to evaluate the characterization of the pyrolysis products of propylene glycol(PG) and glycerine alone and together with tobacco. The weight change of the samples during the pyrolysis was measured by a thermal analyzer(STD-2960). The pyrolysis products were determined by GC/MS after pyrolysis using a curie-point pyrolyzer(CPP, $220^{\circ}C,\;420^{\circ}C,\;650^{\circ}C,\;and\;920^{\circ}C$) and a double-shot pyrolyzer(DSP, $220^{\circ}C,\;420^{\circ}C,\;650^{\circ}C,\;and\;800^{\circ}C$), respectively. The pyrolysis products from tobacco with and without the addition of PG($2\%$) and glycerine($2\%$ were assayed for its pyrolytic behavior. The results showed that a dramatic change in weight of PG and glycerine was observed at $175^{\circ}C\;and\;249^{\circ}C$, respectively. PG and glycerine showed different patterns for their pyrolysis products according to the method of pyrolysis. Namely, the change rate in pyrolysis with DSP was much higher than that of CPP at above $650^{\circ}C$. The major pyrolysis products of PG were propene, acetaldehyde, propanal, and acetol; the major pyrolysis products of glycerine were 2-propenal, 2-propenol, acetol, and acetic acid. In the pyrolysis experiments of tobacco added PG and glycerine, the pyrolysis products of PG and glycerine weren't detected additionally, except for diethyleneglycol diacetate. From these results, it can be concluded that the PG and glycerine added to tobacco would not be expected to pyrolyse extensively during smoking.

• Elastomers and Composites
• /
• 제27권3호
• /
• pp.161-173
• /
• 1992

A series of polyurethane block copolymers based on hydroxyterminated poly(dimethyl siloxane), poly(propylene glycol) and poly(tetramethylene glycol) soft segments of molecular weights 1,809, 2,000 and 2,000, respectively, were synthesized. The hard segments consisted of 4,4'-diphenylmethane diisocyanate and 1,4-butanediol as the chain extender. Samples with different molar ratios were prepared. We tried to synthesize poly(dimethyl siloxane)-based polyurethane(PDMS-PU) containing a hard block as major fraction and a soft block as minor fraction for preparing toughened rigid systems. After a study of the pure PDMS-PU, poly(propylene glycol)-based polyurethane(PPG-PU) and poly(tetramethylene glycol)-based polyurethane(PTMG-PU), (mixed polyol)-based block copolymers and blends between PDMS-PU, PPG-PU and PTMG-PU were prepared, and characterized by means of differential scanning calorimetry, tensile testing and scanning electron microscopy. In (mixed polyol)-based PU and in lower hard segment content blends, macro-phase separation was shown, but blends with higher hard segment contents showed significant reduction in amounts of phase separation.

• 한국식품과학회지
• /
• 제20권2호
• /
• pp.157-163
• /
• 1988

Propylene glycol 용매계에서 0.5M DL-alanine(${\alpha}-amino-propionic acid$) 와 0.5M D-glucose 를 $100^{\circ}C,\;120^{\circ}C$ 및 $140^{\circ}C$에서 각각 20분, 2시간 반응시켜 생성되는 휘발성 화합물을 분석하고 반응온도와 시간이 갈색화반응 및 휘발성 화합물생성에 미치는 영향을 조사하였다. 갈색화반응 및 휘발성 화합물생성에 미치는 영향을 조사하였다. 갈색화반응은 반응온도와 시간이 증가함에 따라 급격히 증가 하였다. 휘발성 화합물은 7종의 alkylpyrazine, 4종의 pyrrole, 3종의 furan, 1종의 furanone 그리고 기타성분으로 2-hydroxy-3-methyl-2-cyclopenten-1-one을 포함하여 11종이 확인되었으며 pyrazine, pyrrole 및 furan화합물의 생성량은 반응온도가 높아지고 반응시간이 길어짐에 따라 급격히 증가하였다. 또한 alanine과 glucose의 마이야르 반응에 의해 생성되는 구수한 카라멜냄새 및 설탕 탄냄새(burnt sugar-like)는 주로 2-hydroxy-3-methyl-2-cyclopenten-1-one, 2, 5-dimethyl-4-hydroxy-3(2H)-furanone과 같은 함 산소화합물과 pyrazine, pyrrole과 같은 함 질소화합물에 의해 생성되는 것으로 추정되었다.

• Applied Biological Chemistry
• /
• 제12권
• /
• pp.53-56
• /
• 1969

Bacillus subtilis var. M-181 생산(生産)한 amylase의 내열성(耐熱性)에 미치는 alcohol류(類)와 탄수화물(炭水化物)의 영향(影響)을 검토(檢討)하였다. 그 결과(結果)는 다음과 같다. 1. Alcohol류(類)에서는 glycerin, propylene glycol, ethylene glycol, ethyl alcohol, methyl alcohol 등(等)의 순(順)으로 내열성증가(耐熱性增加)의 효과(?果)가 있었으며 고급일가(高級一價) alcohol 과 dipropylene glycol 은 역효과(逆?果)를 나타냈다 2. Inositol은 당(糖) alcohol 보다 효과(?果)가 컸으며 당(糖) alcohol 중(中)에서는 mannitol, dulcitol, sorbitol의 순(順)으로 내열효과(耐熱效果)가 있었다. 3. 단당류(單糖類)에서는 mannose, galactose, xylose, glucose, arabinose, rhamnose, fructose 등(等)의 순(順)으로 내열효과(耐熱效果)가 있었다. 4. 소당류(小糖類)에서는 melibiose, lactose, maltose, sucrose, raffinose등(等)의 순(順)으로 내열효과(耐熱效果)가 있었다. 5. 다당류(多糖類)에서는 glycogen, soluble starch dextrin 등(等)의 순(順)으로 내열효과(耐熱效果)가 있었으며 inulin의 내열성(耐熱性) 증가효과(增加效果)가 인정(認定)할수 없었다.

• 한국가축번식학회지
• /
• 제16권3호
• /
• pp.269-276
• /
• 1992

Studies were carried out to find the freezing media which gives no ice crystals in single(glycerol, ethylene glycol, dimethyl sulfoxide(DMSO)) and mixture solutions(glycerol＋propylene glycol, glycerol＋ethylene glycol) of permeable cryoprotectants in vitrification solution and to study effects of VS on the survival of vitrified mouse morulae. The results are summarized as follows: 1. In toxicity test of permeable cryoprotectants, 30% glycerol of single solution showed the highest FDA-score(4.1) in mouse morulae frozen compared among other single solutions. The FDA-score(4.1) of 30% glycerol was higher than 30% ethylene glycol(3.6) and DMSO(1.4( (P<0.05). 2. 20, 30 or 40% single solution of permeable cryoprotectants containing m-PBS with 10% sucrose and 20% BSA was not crystallized during cooling, but crystallized during warming. However, the 30% mixture solution of the two permeable cryoprotectants was not crystallized both during cooling and warming.3. When mouse morulae were frozen in 30% mixture solutions of two permeable cryoprotectants(glycerol and propylene glycol, glycerol and ethylene glycol), highest FDA-score(4.5) was obtained in a mixture solution of 20% glycerol and 10% ethylene glycol(20G10E) than other 30% mixture solutions(10G20E, 15G15E, 20G10P, 15G15P, 10G20P) and there was significant difference between 20G10E and 10G20E(P<0.05).

• Archives of Pharmacal Research
• /
• 제24권6호
• /
• pp.578-583
• /
• 2001

To investigate the feasibility of developing a new tenoxicam plaster, the effects of vehicles and penetration enhancers on the in vitro permeation of tenoxicam from a pressure-sensititre adhesive (PSA) matrices across the dorsal hairless mouse skin were studied. Vehicles employed in this study were propylene glycol (PC)-oleyl alcohol (OAI), PG-oleic acid (OA), and diethylene glycol monoethyl ether (DCMI)-propylene glycol monolaurate (PCML) cosolvents with/without fatty acids. In this studys amines such as triethanolamine (TEA) and tromethamine (TM) were additionally used as a solubilized. Among PSAs used, $Duro-Tak^{\circledR}$87-2510 showed much higher release rate than either $Duro-Tak^{\circledR}$ 87-2100 or $Duro-Tak^{\circledR}$87-2196. The relatively high flux rate was obtained with the formulation of DCMI-PCML (40:60, v/v) with 3% OA and 5% TM, and the flux increased as a function of the dose;the initial flux up to 12 h was $4.98{\pm}1.38{\;}{\mu\textrm{g}}/{\textrm{cm}^2}/h$ at the tenoxicam dose of $50{\;} mg/70{\;}{\textrm{cm}^2}$. This flux was much higher than that of a commercial piroxicam patch ($Trast^{\circledR}$) ($1.24{\pm}0.73{\;}{\mu\textrm{g}}/$\textrm{cm}^2/hr$) with almost only one-third that of the commercial patch. Therefore, these observations indicated that these composition of tenoxicam plaster may be practically applicable.