• Korean Chemical Engineering Research
• /
• v.53 no.4
• /
• pp.463-467
• /
• 2015

We investigated catalytic activity of ion-exchange resins in acetalization of 1,2-propylene glycol with acetaldehyde. The impacts of reaction variables, such as temperature, reaction time, catalyst loading and feedstock composition, on the conversion of 1,2-propylene glycol were measured. The life of the catalyst was also studied. Furthermore, the reaction kinetics of 1,2-propylene glycol acetalization was studied. It was found that reaction rate followed the first-order kinetics to acetaldehyde and 1,2-propylene glycol, respectively. Therefore, overall acetalization reaction should follow the second-order reaction kinetics, expressed as. Key words: 1,2-propylene Glycol, 2,4-dimethyl-1,3-dioxolane, Ion-exchange Resin, Polyhydroxy Compounds, Acetalization $r=kC^{nA}_AC^{nB}_B=19.74e^{\frac{-6650}{T}}C^1_AC^1_B$.

• Restorative Dentistry and Endodontics
• /
• v.7 no.1
• /
• pp.47-52
• /
• 1981

The purpose of this study is to determine the antibacterial effect of Dilute Formocresol and Eugenol and Propylene glycol. The experimental drugs are Formocresol in Propylene glycol (5, 10, 20%) and Eugenol in Propylene glycol (50, 75, 100%) and Propylene glycol. The organisms selected for study were Staphylococcus aureus, Pseudomonas aeruginosa, and Bacillus subtilis which are found in infected root canals and are highly resistant to antiseptics. Isolated bacteria were inoculated on blood agar plate and the plates were incubated at $37^{\circ}C$ for 18 hours and the zones of inhibition then measured. The results were as follows ; 1. The antibacterial action of Formocresol was effective even at 5-10 percent and the action increased when higher concentration was used. 2. The antibacterial action of Eugenol was not effective and the action decreased when higher concentration was used. 3. Propylene glycol itself possessed some antibacterial properties and showed that the antibacterial action of Propylene glycol might be almost the same as that of Eugenol. 4. Among the experimental organisms, Pseudomonas aeruginosa was found to be the most resistant to all the experimental drugs.

• Journal of the Korean Chemical Society
• /
• v.54 no.1
• /
• pp.105-109
• /
• 2010

HEMA (2-hydroxyethyl methacrylate), EGDMA (ethylene glycol dimethacrylate) and propylene glycol was copolymerized in the presence of AIBN (azobisisobutyronitrile) initiator in a mould. The physical properties of the contact lens were measured. The water content of 37.06~38.71%, refractive index of 1.492~1.432, visible transmittance of 89.4~91.5%, tensile strength of 0.1416~0.2302 kgf, and contact angle of $38.60{\sim}53.53^{\circ}$ were obtained. Therefore, the contact lens material produced using propylene glycol as an additive satisfied the basic physical properties required for contact lenses application. It is interesting to note that an increase in wettability and tensile strength while having no significant changes in water content.

• Journal of the Korean Applied Science and Technology
• /
• v.6 no.1
• /
• pp.27-30
• /
• 1989

The fast separation and determination of cefatrizine${\cdot}$propylene glycol and inmpurities - TACA: 7-amino-3-(1,2,3-triazol-4-yl)thiomethyl-3-cephem-4-carboxylic acid and 7-ACA; 7-amino cephalosporanic acid - was performed by the high poerformance liquid chromatography using octadecyl siland (ODS) column. Methanol and ammonium phosphate buffer [$0.03M(NH_4)_2\;HPO_4$, (pH 7.5)] was used analyze, as eluent. The experimental value of the contents of cefatrizine${\cdot}$propylene glycol and impurities agree with the theoretical value of those.

• Korean Chemical Engineering Research
• /
• v.47 no.3
• /
• pp.380-385
• /
• 2009

The absorption rate of carbon dioxide with 2-amino-2-methyl-1-propanol(AMP) was measured in such non-aqueous solvents as methanol, ethanol, n-propanol, n-butanol, ethylene glycol, propylene glycol, and propylene carbonate, and in water at 298 K and 101.3 kPa using a semi-batch stirred tank with a plane gas-liquid interface. The overall reaction rate constant, obtained under the condition of fast reaction regime, from the measured rate of absorption was used to get the elementary reaction rate constants in complicated reactions represented by reaction mechanism of carbamate formation and the order of overall reaction of $CO_2$ with amine. The correlation between the elementary reaction rate constant and the solubility parameter of the solvent was also presented.

• Journal of Pharmaceutical Investigation
• /
• v.33 no.1
• /
• pp.45-49
• /
• 2003

The solubility and stability of ondansetron hydrochloride (OS) in various vehicles were determined. The effect of cyclodextrins (CD) on the solubility of OS in water was determined by equilibrium solubility method. The solubility of OS at $32^{\circ}C$ increased in the rank order of isopropyl myristate (IPM) < propylene glycol laurate (PGL) ${\ll}$ propylene glycol monolaurate < propylene glycol monocaprylate (PGMC) < poly(ethylene glycol) 400 < diethylene glycol mono ethyl ether (DGME) < ethanol < poly(ethylene glycol) 300 < water (36.1 mg/ml) ${\ll}$ propylene glycol (PG) (283 mg/ml). The addition of PG or DGME to non-aqueous vehicles such as IPM, PGL and PGMC markedly increased the solubility of OS. The addition of CDs in water increased the solubility. Apparent stability constant for the CD complexation with OS was calculated to be $25.5\;M^{-1}$ for $2-hydroxypropyl-{\beta}-CD\;(2HP{\beta}CD)$. Twenty mM ${\beta}-CD$, 69.4 mM sulfobutyl ether ${\beta}-CD$ and 115.4 mM $2HP{\beta}CD$ increased the aqueous solubilty of OS 1.27, 2.18 and 1.85 times, respectively. OS was stable in buffered aqueous solution (pH 5.0). However, OS was relatively unstable in non-aqueous vehicles in the order of PG

• Membrane Journal
• /
• v.14 no.3
• /
• pp.250-257
• /
• 2004

PEG(poly(ethylene glycol)) acrylate/PPG(poly(propylene glycol)) acrylate (PEG/PPG) was prepared using UV induced photopolymerization method to investigate gas permeation properties of the membrane. The effect of PPG content on the solubility, diffusivity, and permeability of $CO_2$, $O_2$, and $N_2$ in PEG/PPG membrane is reported at $25^{\circ}C$ and $35^{\circ}C$. PEG/PPG (9:1) membrane exhibits $CO_2$ permeability coefficient of 28.9 barrer and $CO_2$/$N_2$ pure gas selectivity of 57.9 at $25^{\circ}C$. Permeability coefficient of increased with increasing with PPG content in the membrane. PEG/PPG (5:5) membrane shows $CO_2$ permeability coefficient of 78.9 barrer and $CO_2$/$N_2$ pure gas selectivity of 33.2 at $25^{\circ}C$.

• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.234.1-234.1
• /
• 2003

The effects of vehicles and penetration enhancers on the in vitro permeation of ketorolac tromethamine (KT) across excised hairless mouse skins were investigated. Among pure vehicles examined, propylene glycol monolaurate (PGML) showed the highest permeation flux, which was 94.3${\pm}$17.3 mg/cm$^2$/hr. Even though propylene glycol monocaprylate (PGMC) alone did not show high permeation rate, the skin permeability of DT was markedly increased by the addition of diethylene glycol monoethyl ether (DGME); the enhancement factors were 19.0 and 17.1 at 20 and 40% of DGME, respectively. (omitted)

• Korean Journal of Food Science and Technology
• /
• v.31 no.4
• /
• pp.957-963
• /
• 1999

Effects of cryoprotectants on protein denaturation of soybean curd, tofu, during frozen storage were examined. A whole-coagulated non-press tofu was prepared by adding 2% of isolated soybean protein to soy milk in order to prevent loss of added cryoprotectants. The cryoprotectants added were glocose, glycerol, sorbitol, propylene glycol, and tripolyphosphate. The texture characteristics of soybean curds before and after frozen storage were measured by sensory evaluation and Texture analyzer, and the results were evaluated by response surface methodology (RSM). Glucose, glycerol, sorbitol, and sodium tripolyphosphate were effective as single cryoprotectant, and the mixtures of glucose and sodium tripolyphosphate, and sorbitol and propylene glycol were also effective in minimizing textural change during freezing. Overall, the mixture of cryoprotectants were more effective than single cryoprotectant. According to the RSM, the maximum effect of cryoprotectants in minimizing textural changes during freezing was obtained with the mixture of 2.1% glucose, 6.7% glycerol, 2.1% sorbitol, 0.4% propylene glycol, and 0.3% sodium tripolyphosphate. However, considering the sensory acceptability, the optimum use of cryoprotectants in frozen tofu was 1% glucose, 2% glycerol, 1% sorbitol, 0.2% propylene glycol, and 0.5% sodium tripolyphosphate.

• Clinical and Experimental Reproductive Medicine
• /
• v.17 no.2
• /
• pp.167-172
• /
• 1990

This study was carried out to clarify the effects of various kinds of cryoprotectants which were frequently used in freezing embryos of domestic animals on the survival of frozen-thawed mouse embryos. Mouse embryos were collected by hyperstimulation induction of ICR mouse. The samples were slowly cooled ($l^{\circ}C/min$) to temperatures between $-7^{\circ}C$ and $-30^{circ}C$ before direct transfer to liquid nitrogen ($-196^{\circ}C$) and thawed rapidly ($-500^{\circ}C$/min). As cryoprotectants, Glycerol, DMSO, Ethylene glycol and Propylene glycol were used and applied each 2 cell, 8 cell, morula in embryo stage. After normal mouse embryos developed to blastocyst by in vitro culture, we observed recovery rate and developing rate of embryos at thawing. The results obtained in these experiments were as follows : 1. The in vitro development rate from the frozen-thawed 2 cell embryos to the blastocyst were 67.7% in ethylene glycol, 65.7% in Propylene glycol, 55.2% in glycerol and 50.0% in DMSO respectively. 2. The in vitro development rate from the frozen-thawed 8 cell embryos to the blastocyst were 83.6% in DMSO, 75.7% in glycerol, 52.2% in propylene glycol respectively. 3. The in vitro development rate from the frozen-thawed morula to the blastocyst were 84.2% in glycerol, 80.0% in DMSO, 66.6% in propylene glycol and 55.2% in ethylene glycol respectively.