• Journal of Food Hygiene and Safety
• /
• v.16 no.1
• /
• pp.61-65
• /
• 2001

To investigate the optimum condition of 3-monochloro-1, 2-propanediol(MCPD) analysis, gas chromatography with electron capture detector was used. Determination of MCPD derivatized with phenylboric acid was more effective than that of underivatized MCPD. In derivatization of MCPD with phenyl boric acid, there were no significantly different between boiling for 2min at 9$0^{\circ}C$ and vortexing for 5min at room temperature. Extrelut column was suitable for extraction of MCPD diluted in 20% NaCl solution and recovery rates were higher than direct extraction of MCPD with ethyl acetate. But, the method of direct extraction of MCPD with ethyl acetate was useful for rapid ants qualitative analysis. The sample extracted in soysauce(ganjang) was derivatized with phenylboric acid and analyzed by gas chromatography-mass selective detector. That was confirmed as MCPD-phenylboronate.

• Animal Bioscience
• /
• v.34 no.2
• /
• pp.223-232
• /
• 2021

Objective: To investigate the improvement in utilization efficiency of total mixed ration (TMR) on Tibetan plateau, TMR were ensiled with different additives. Methods: A total of 150 experimental silos were prepared in a completely randomized design to evaluate the six treatments: i) control (without additive), ii) Lactobacillus buchneri (L. buchneri), iii) acetic acid, iv) propionic acid, v) 1,2-propanediol; and vi) 1-propanol. After 90 days of ensiling, silos were opened for fermentation quality and in vitro analysis, and then subjected to an aerobic stability test for 14 days. Results: Treating with L. buchneri, acetic acid, 1,2-propanediol and 1-propanol decreased propionic acid contents and yeast number, whereas increased (p<0.05) pH, acetic acid and ethanol contents in the fermented TMR. Despite increased dry matter (DM) loss in the TMRs treated with 1,2-propanediol and 1-pronanol, additives did not affect (p>0.05) all in vitro parameters including gas production at 24 h (GP24), GP rate constant, potential GP, in vitro DM digestibility and in vitro neutral detergent fibre digestibility. All additives improved the aerobic stability of ensiled TMR to different extents. Specially, aerobic stability of the ensiled TMR were substantially improved by L. buchneri, acetic acid, 1,2-propanediol, and 1-propanol, indicated by stable pH and lactic acid content during the aerobic stability test. Conclusion: L. buchneri, acetic acid, 1,2-propanediol, and 1-propanol had no adverse effect on in vitro digestibility, while ensiling TMR with the additives produced more acetic acid and ethanol, subsequently resulting in improvement of aerobic stability. There is a potential for some fermentation boosting additives to enhance aerobic stability of fermented TMR on Tibetan plateau.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.10
• /
• pp.909-918
• /
• 1996

Syntheses of carbapenam skeletons were achieved from 1,3-propanediol through 1,3-dipolar cycloaddition. 3-(Tetrahydropyran-2-yloxy)-(10) and 3-(t-butyldimethylsilyloxy) propanal (13) were obtained from 1,3-propanediol. 3-Hydroxypropanals (10, 13, 14) were reacted with N-hydroxyglycine esters to give C-(2-hydroxyethyl)-N-alkoxycarbonylmethylnitrones (15a-15d). 1,3-Dipolar cycloaddition of the nitrones with methyl acrylate or ethyl crotonate gave 3-(2-hydroxyethyl)isoxazolidines (16a-16b, 17a-17b, 18, 19a-19b). 3-(2-Hydroxyethyl)isoxazolidines (17a, 17c, 19a, 19b) were converted to 3-(2-iodoethyl)isoxazolidines (21a-21d) or 3-phenylthiocarbonylmethylisoxazolidines (25a-25d) which were cyclized to give 2-oxa-1-azabicyclo[3.3.0]octanedicarboxylates (22a-22d, 26a-26d). 2-Oxa-1-azabicyclo[3.3.0]octane-4,8-dicarboxylates (22c-22d, 26c-26d) were transformed to 6-(l-hydroxyethyl)carbapenam-3-carboxylates (30a-30b, 31a-31b).

• Analytical Science and Technology
• /
• v.23 no.4
• /
• pp.423-428
• /
• 2010

In this study, VOCs of black gel pen inks was screening to identify individual characteristic of gel pen inks. Detected VOCs was total 20 species(isopropylalcohol, 2-methyl-2-propanol, 2-butanone, hydrazinecarbothioamide, benzeneacetic acid (ethyl ester), benzeneacetic acid, dimethoxymethy-silane, 2,2-dimethoxybutane, tetrahydro-2-methyl-furan, 1,2-ethanediol, silicic acid (tetramethyl ester), 1,2-propanediol, propyleneglycol, 3-ethyl-3-hexanol, 1,1-dipropoxy-propane, 2-butoxy-ethanol, 2,2'-oxybisethanol, 1-butyl-benzene, 2-pyrrolidinone, 2-(2-butoxyethoxy)-ethanol). We detected 2,2-dimethoxybutane (3.02~47% ratio) and tetrahydro-2-methyl-furan (1.19~52.19% ratio), 1,2-ethanediol (52.83~95.84% ratio). In case of manufacturer, manufactured ink was able to discriminate between Japan and Korea by distinct characteristics (Japan: 1,2-ethanediol, 52.83~95.84%, Korea: 1,2-propanediol, 76.17~93.51%). The results of this study indicated that distinct characteristic about manufacturers and brands could make a classifring tool of inks for identification of between gel pen inks.

• KSBB Journal
• /
• v.31 no.4
• /
• pp.246-255
• /
• 2016

Co-production of 3-hydroxypropionic acid (3-HP) and 1,3-propanediol (1,3-PDO) was suggested as an innovative strategy to overcome several limitations occurring in the single production of 3-HP from glycerol. In this study, two new isolates of Klebsiella pneumoniae, which produce less lipopolysaccharide (LPS) thus considered less pathogenic than K. pneumoniae DSM 2026, were compared and evaluated for their potential for the co-production of 3-HP and 1,3-PDO. The newly isolated strains showed significantly faster sedimentation rate than DSM, which should be beneficial for downstream processing. Analysis of genome sequences of the isolates confirmed the presence of all genes necessary for glycerol assimilation, 1,3-PDO production and biosynthesis of coenzyme $B_{12}$. Co-production yield was highest under anaerobic condition while cell growth was highest under aerobic condition. Both strains showed similarly good performance for the co-production although J2B gave the slightly higher co-production yield of 0.80 mol/mol than GSC021 (0.75 mol/mol). The evaluation of the newly developed strains presented here should be useful in designing similar evaluation experiments for other microorganisms.

• Clean Technology
• /
• v.20 no.4
• /
• pp.383-389
• /
• 2014

$CO_2$ absorption processes have a good potential for large scale capture of $CO_2$ but a large amount of absorbing solution has to be regenerated, undesirably increasing the consumption of energy such as sensible heat and latent heat of vaporization. In this study, a cooling crystallization process which would separate the $CO_2$-rich potassium bicarbonate crystals from $CO_2$-lean water was developed to reduce the energy penalty. Sterically hindered alkanolamine additives were used to enhance the $CO_2$ removal efficiency and their antisolvent effect on the crystallization was found in a continuous cooling crystallizer. The production yields of crystals were increased in the sequence of 2-amino-2-methyl-1-propanol (AMP) < 2-amino-2-methyl-1,3-propanediol (AMPD) < 2-amino-2-hydroxymethyl-1,3-propanediol (AHPD), which are related to the number of hydroxyl groups in the additive molecules. Using $^{13}carbon$ nuclear magnetic resonance, the additives favored the formation of bicarbonate ions by steric hindrance effect and increased the supersaturation of $KHCO_3$. It is shown that the additives increase the mean size of crystals and crystal growth rate by increasing supersaturation. The additives are promising for enhancing the $CO_2$ removal efficiency and reducing the regeneration energy cost of $CO_2$ absorbing solution by promoting $KHCO_3$ crystallization.

• KSBB Journal
• /
• v.23 no.5
• /
• pp.413-418
• /
• 2008

The production of 1,3.propanediol (1,3-PD) was investigated with Klebsiella pneumoniae DSM2026 and K. pneumoniae DSM4799 using crude glycerol obtained from biodiesel industry. Crude glycerol was used without prior purification to investigate effects of impurities in crude glycerol on 1,3-PD production. In the batch cultures, 1,3-PD production with crude glycerol was $1.1{\sim}2.5$ times higher than that with pure glycerol, indicating that crude glycerol is even a better substrate than pure glycerol for 1,3-PD fermentation. When glucose was added, 1,3-PD production and yield decreased in spite of enhanced cell growth. Furthermore, the addition of glucose was found to increase 2,3-butanediol, a by-product, significantly because of the change in metabolism in the presence of glucose. In semi-batch cultures without glucose addition, 26 g/L 1,3-PD was produced with crude glycerol, which was $2{\sim}3$ times higher than that with pure glycerol. Based on our results, it was clearly shown that crude glycerol is an effective substrate for biological 1,3-PD production, making it more feasible to produce 1,3-PD at a lower price.

• Proceedings of the Korean Fiber Society Conference
• /
• 1999.10a
• /
• pp.45-48
• /
• 1999

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.729-729
• /
• 2003

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.6
• /
• pp.9-15
• /
• 2004

PZT(30/70) thick film was fabricated by using 1,3 propanediol-based sol-gel method. Prepared film of pyroelectric property was investigated by Dynamic method of modulation frequency dependence. Pyroelectric coefficient was obtained about $5.0{\times}10^{-8}\;C/cm^2{\cdot}K$. The figure of merits for voltage responsively and specific detectivity were $3.4{\times}10^{-11}\;C{\cdot}cm/J$ and $5.9{\times}10^{-9}\;C{\cdot}cm/J$, respectively, because of relative high-dielectric constant and high-pyroelectric coefficient. Voltage responsively was increased at low modulation frequency and it was decreased at high modulation frequency. Voltage responsively was maximum 1.84 V/W at 10Hz. As Johnson noise is dominant, Noise voltage was increased nearly proportional to $f^{-1/2}$. Noise equivalent power and specific detectivity were $2.83{\times}10^{-7}\;W/Hz^{1/2}$ and 3.13{\times}10^5\;cm{\cdot}Hz^{1/2}/W$ the same frequency at 80Hz, respectively.