• 한국지반공학회논문집
• /
• 제33권9호
• /
• pp.23-34
• /
• 2017

도심지 지하공간 개발을 위해서는 안정성 확보를 위해 암반 또는 암주의 미세균열까지도 보강해야 한다. 본 논문에서는 그라우팅 재료의 점도 및 입경, 주입압력, 균열 폭 등을 고려한 미세균열 그라우팅의 주입성능에 대한 연구를 수행하였다. 미세균열 보강에 사용되는 대표적인 그라우팅 재료는 용액형인 약액형 그라우팅 재료와 현탁액형인 시멘트계 그라우팅 재료가 있다. 약액형 그라우팅 재료와 시멘트계 그라우팅 재료의 주입성능은 공통적으로 점도에 영향을 받으며, 시멘트계 그라우팅 재료의 주입성능은 추가적으로 주입 재료의 입경에 영향을 받는다. 실내실험을 통해 점도를 역계산하여 재료별로 적합한 점도 측정 방법을 제시하였고, 균열 폭과 재료의 입경 간의 관계를 이용한 groutability ratio로 시멘트계 그라우팅 재료의 그라우팅 가능여부를 평가하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1559-1570
• /
• 2008

A new grouting material named 3S is developed that can be used effectively for reinforcing cut surface of weathered rock in processing of tunneling. The new material is composed of mostly micro slag cement and general Portland cement, but the material is foundered again upto $8,000\;cm^2/g$ of specific area so that it can be easily infiltrated in to the ground. For verifying technical and engineering quality of the material several laboratory tests with specially designed test apparatus were performed including compression tests, infiltration tests and resonant column tests. It was verified that the newly developed grouting material at early age of 1 or 3 days generates 200~1500% higher compressive strength and 400~560% larger elastic modulus than those of the LW(LW-1) or micro-cement(LW-2) grouting materials in the market. In addition, the new 3S grouting material could be so easily infiltrated into the model ground in the lab tests that it produces 4 times larger grouted roots in average compared to the usual water glass type grouting material(LW-1). Thus, it can be said that the newly developed grouting material can effectively prevent inflow water into tunnel compared to LW grouting materials.

• 한국터널지하공간학회 논문집
• /
• 제21권2호
• /
• pp.301-321
• /
• 2019

본 논문에서는 강관다단 그라우팅에 적용하는 속경성 실링재 개발에 관한 실험적 내용을 다루었다. 강관다단 그라우팅 공법에서 실링재는 본 주입재의 주입시 역류를 방지하기 위해 주입하며 주입 후 일정시간이 지난 다음 겔화 상태에서 본 주입재를 주입해야 한다. 그러나 주입된 실링재가 겔 상태가 되기 이전 유동성이 있을 경우 본 주입재와 함께 혼합됨은 물론, 주입재의 역류가 발생되어 원지반으로 주입이 곤란하며, 반대로 너무 시간이 지나 겔화단계를 넘어 고결되었을 경우 본 주입재가 지반내로 주입되지 못하는 경우가 발생된다. 실링재의 유동성이 없어져 겔화 상태로까지 걸리는 시간에 따라 강관다단 그라우팅의 공사시간이 결정되며, 이는 전체 터널의 공사기간과 밀접한 관련이 있어 중요한 요소 중에 하나이다. 따라서 본 연구에서는 실링재 본연의 역할과 기능을 할 수 있을 뿐 아니라 공사기간을 단축시킬 수 있도록 실링재의 겔화시간을 단축시킬 수 있는 칼슘알루미네이트 재료를 개발하였고, 실링재 겔화 여부를 판단하는 방법에 대해 제시하고, 아울러 실링재의 겔 상태에서 블리딩율에 대해서도 각 품질기준과 시험방법에 대해 제안하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.581-590
• /
• 2005

The grouting method is widely used as the impermeable effect and ground reinforcement in construction. But, it has a problem that cement and grout material are not mixed well in the injection tip equipment and an opposite flow and interception state of the chemical grouting is happened. so, continuous work is difficult. McG method installed a special grouting and device, made possible go well mixing of grouting material and prevent flowing backward and block of nozzle also diversify powder rate of cement that is grouting material to select sutible material in layer conditions. YSS that lowered $Na_2O$ influencing durability and circumstance is developed by gel-forming reaction material. so eco-circumstance and durability is increased by minimizing dissolution of underground water. In this study, it is assumed that seepage state of the injection material using a special injection tip equipment and a unconfined compressive strenth by mixing a various injection material of various. And it is confirmed that strenth increase effect and permeable decrease of the improved body through the test execution and field execution.

• Geomechanics and Engineering
• /
• 제12권5호
• /
• pp.739-752
• /
• 2017

This study was intended to evaluate the improved strength of the ground by applying the bio grouting method to a loose sandy ground. The injection material was prepared in the form of cement-like powder, with the bio injection material produced by microbial reactions. The grouting test was conducted under the conditions similar to the field where the bio injection material can be applied. In addition, the injection materials (cement and sodium silicate No. 3) used for Labile Waterglass (LW) method and the conventional grouting methodwere prepared through a two-solution one-step process. The injection into the specimens was done at a pressure of 150 kPa and then, with a bender element, their moduliof elasticity were measured on the 7th, 14th, 21st and 28th curingdays to analyze their strengths according to the duration of curing. It was confirmed that in all injection materials the moduli of elasticity increased over time. In particular, when 30% of the bio injection material was added to 100% cement, the modulus of elasticity tended to increase by about 15%. This confirmed that the applicability became higher when the bio injection material was used in place of the conventional sodium silicate.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.533-538
• /
• 2010

This study was performed for evaluate permeability in base of development material and existing grouting. And examined durability by age strength when devide seawater and fresh water that water curing. Executed permeability test to choose base to produce pouring in specimen. About 5 grouting material, produced pouring in specimen. Seawater strength of all grouting materials except BGI decreased gradually as result that divide seawater and fresh water that water curing.

• 자연, 터널 그리고 지하공간
• /
• 제1권1호
• /
• pp.67-80
• /
• 1999

The Grout-reinforcement technique which is widely used during the excavation of a shallow or an endangered tunnel can be classified into a couple of groups according to the properties and injection methods of the grout. The reinforcement design will, therefore, take a different approach based on the grouting method under consideration. However, the injection procedure is mainly performed by the experience of the foreman rather than engineering judgement , specifically the permeation grouting through the rock joints and its reinforcement effect Is not fully under-stood during the design stage, In this study, the anisotropic material properties of the grout-reinforced rock masses are derived from the concept of composite materials and the effect of intact rock, vertical grouting and permeation grouting is, therefore, fully accounted for. Through the parametric studies on the characteristics of rock joints, intact rock and grouting materials, various case studies have been considered. The results, illustrated via the design charts, can be directly used during the reinforcement design.

• 터널과지하공간
• /
• 제6권4호
• /
• pp.298-305
• /
• 1996

Grouting technique is frequently used where a tunnel structure is passing through the shallow overburden area or where the thickness of hard rock above the tunnel is rather thin. However, engineering background on design process of the grout reinforcement does not seem to be fully understood until now. Mechanics of composite material is, therefore, introduced in this study to investigate the orthotropic material properties of the composites containing soil(or rock) and grouting material. These orthotropic material properties can be used to represent the reinfocement effects quantitatively. The model developed in this study is next applied to a typical tunnel structure and the grouting effect is analyzed numerically. The idea used in this study can be expanded to a situation where a pipe roofing or a forepoling technique is adopted and a simplified design procedure, similar to the model model introduced in this study, can be developed.

• 한국방재안전학회논문집
• /
• 제7권2호
• /
• pp.25-34
• /
• 2014

본 연구는 그라우팅 기술의 근간을 이루는 구성기술인 그라우팅 재료, 그라우팅 장비 그리고 시공관리기술에 대하여 각 요소별로 세계적인 기술동향을 조사 및 분석하여 상대적으로 열악한 국내 그라우팅 기술수준을 향상시키며 향후 해외시장 진출시 갖추어야할 시방기준 등을 수립하기 위한 목적으로 수행하였다. 그라우팅 재료는 2000년대부터 일본에서는 고침투 및 고강도가 발현되는 극 초미립자 시멘트($1.5{\mu}m$)를 개발하고 있고 국내에서는 김진춘 등(2014)은 마이크로시멘트계열의 하이브리드형 그라우트재료를 개발하고 있다. 최신 그라우팅 장비개발의 동향을 파악하기 위해 해외국가별 혹은 프로젝트별 시방서를 우선 검토하였으며 시방서의 주요내용으로는 재료사양 그리고 믹서, 펌프, 교반기 혹은 팩커에 대한 요구스펙까지 상세하게 기술되어있어 해외프로젝트 수주를 위해서는 각 국에서 제시한 시방서의 기준을 만족하여야 한다. 그라우팅 시공관리기술은 크게 1~4세대 기술까지 발전하고 있는데 최근에는 ICT와 그라우팅 기술을 융합하는 4세대 연구가 북유럽국가 (스웨덴, 노르웨이 및 핀란드), 일본 및 한국 등에서 활발하게 진행되고 있다.

• 한국농촌건축학회논문집
• /
• 제21권2호
• /
• pp.35-42
• /
• 2019

There are 17,427 reservoirs in Korea, of which about 96% were built before the mid 1980s. Therefore, aging is severe and reinforcement are necessary. In addition, aged reservoirs, which are more than 50 years old, account for 70% of the total. Therefore, there is a problem such as the collapse of the reservoir and the decrease of the storage capacity due to progress of aging with time. The grouting method using cement is mainly used as maintenance and reinforcement method of old reservoir. However, the grouting method using cement has engineering and environmental problems. In order to solve the engineering and environmental problems of cement grouting method, an eco-friendly grouting material was developed that mixes circular resource grouting binder, high molar ratio sodium silicate and colloidal silica. The engineering and environmental properties of the developed injection materials were evaluated by conducting gel time, homo-gel strength, sea water resistance test and environmental stability evaluation. Also, examined the possibility of replacing OPC existing aged reservoir reinforcement methods. As a result, it was found out that it was better than the conventional cement method in terms of engineering and environment. However, since this study is the result of laboratory test, it is necessary of verify the application at field of aged reservoir.