• Title/Summary/Keyword: -S9 Mix

Search Result 250, Processing Time 0.025 seconds

Desmutagenic Effects of Seaweed and Vegetable Extracts against Mutagenicity of Maillard Reaction Products (Maillard 반응생성물의 돌연변이원성에 대한 해조 및 야채추출물의 억제효과)

  • KIM In-Soo;KIM Seon-Bong;PARK Yeung-Ho
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.27 no.2
    • /
    • pp.133-139
    • /
    • 1994
  • The desmutagenic effects of seaweed and vegetable extracts were investigated on the mutagenicity of Maillard reaction products (MRP) obtained from equimolar amounts of glucose and amino acid (arginine and lysine${\cdot}$HCl) for Salmonella typhimurium TA 100 without S9 mix. The mutagenicities were inhibited by water-soluble extracts of seaweeds(laver, sea-straghorn, sea-mustard and tangle) and vegetables(ginger, garlic, onion, chinese-pepper, green-onion and cabbage). Cabbage, chinese-pepper, green-onion and sea-straghorn exhibited especially high desmutagenic effects. The desmutagenicities of these extracts(cabbage, green-onion and sea-straghorn) except for sea-straghorn were decreased by heat treatment at $100^{\circ}C$ for 10 min. It is assumed that the desmutagenic effect of seaweed and vegetable extract is due to the reducing power and action of enzyme such as peroxidase and catalase.

  • PDF

Growth and Characterization of $CuInTe_2$ Single Crystal thin Films by Hot Wall Epitaxy (Hot Wall Epitaxy(HWE) 방법에 의한 $CuInTe_2$ 단결정 박막 성장과 특성에 관한 연구)

  • 홍광준;이관교;이상열;유상하;정준우;정경아;백형원;방진주;신영진
    • Korean Journal of Crystallography
    • /
    • v.11 no.4
    • /
    • pp.212-223
    • /
    • 2000
  • A stochiometric mix of CuInTe₂ polycrystal was prepared in a honizonatal furnace. To obtain the single crystal thin films, CuInTe₂ mixed crystal was deposited on throughly etched GaAs(100) by the HWE system. The source and substrate temperatures were 610℃ and 450℃ respectively, and the thickness of the deposited single crystal thin film was 2.4㎛. CuInTe₂ single crystal thin film was proved to be the optimal growth condition when the excition emission spectrum was the strongest at 1085.3 nm(1.1424 eV) of photoluminescence spectrum at 10 K, and also FWHM of Double Crystal X-ray Rocking Curve (DCRC) was the smallest, 129 arcsec. The Hall effect on this sample was measured by the method of Van der Pauw, and the carrier density and mobility dependent on temperature were 9.57x10/sup 22/ electron/㎥, 1.31x10/sup -2/㎡/V·s at 293 K, respectively. The ΔCr(Crystal field splitting) and the ΔSo (spin orbit coupling splitting( measured at f10K from the photocurrent peaks in the short wavelength of the CuInTe₂ single crystal thin film were about 0.1200 eV, 0.2833 eV respectively. From the PL spectra of CuInTe₂ single crystal thin film at 10 K, the free exciton (E/sub x/) was determined to be 1064.5 nm(1.1647 eV) and the donor-bound exciton(D/sup 0/, X) and acceptor-bound exciton (A/sup 0/, X) were determined to be 1085.3 nm(1.1424 eV) and 1096.8 nm(1.1304 eV0 respectively. And also, the donor-acciptor pair (DAP)P/sub 0/, DAP-replica P₁, DAP-replica P₂ and self-activated (SA) were determined to be 1131 nm (1.0962 eV), 1164 nm(1.0651 eV), 1191.1 nm(1.0340 eV) and 1618.1 nm (0.7662 eV), respectively.

  • PDF

An Experimental Study on the Application of Porous Scoria Concrete to Artificial Reefs for Soft Coral (연산호 육성용 어초 개발을 위한 송이 다공성 콘크리트의 적용성에 관한 실험적 연구)

  • HONG CHONG-HYUN;KIM MOON-HOON;KIM SEOK-CHEL;PARK SUNG-BAE;Ryu SEONG-PIL
    • Journal of Ocean Engineering and Technology
    • /
    • v.19 no.4 s.65
    • /
    • pp.28-34
    • /
    • 2005
  • In the study application of volcanic scoria concrete to artificial reefs is investigated. Volcanic scoria is a natural volcanic product that shows light weight, mil/i-porous, and far-infrared irradiation characteristics. The properties of volcanic scoria concrete using Jeju scoria aggregate are evaluated by conducting a comprehensive series of tests on strength and void ratio. It is concluded that the volcanic scoria concrete has the sufficient strength of 4MPa-13MPa and adequate void ratio of $12\%-35\%$ to be accepted as artificial reef concrete. The field experiments are performed through observation by scuba diver's at the Seogwipo coast. Porous specimen and plane concrete specimen are prepared for comparison purposes. Seasonal changes of soft coral on the two series of test specimens were have been observed from Apr. 9, 2004 to Mar. 18, 2005. The soft coral is well grown on the porous specimen however there are no significant changes on the conventional plain concrete specimen. Thus it is concluded that the volcanic scoria concrete is highly suitable as artificial reef concrete.

Evaluation of the Genotoxicity of Decursin and Decursinol Angelate Produced by Angelica gigas Nakai

  • Kim, Kang-Min;Kim, Tae-Ho;Park, Yun-Jung;Kim, Ik-Hwan;Kang, Jae-Seon
    • Molecular & Cellular Toxicology
    • /
    • v.5 no.1
    • /
    • pp.83-87
    • /
    • 2009
  • In this study, we assessed the stability and toxicological safety of Angelica gigas Nakai (A. gigas Nakai) extract, which is comprised of decursin and decursinol angelate (D/DA). D/DA was tested for mutagenicity using Ames Salmonella tester strains (TA102, TA1535, and TA1537) with or without metabolic activation (S9 mix). No increase in the number of revertants was observed in response to any of the doses tested (1.25, 12.5, 125, and $1,250{\mu}/mLg$). In addition, a chromosome aberration test was conducted in the Chinese hamster lung (CHL) cell line. To accomplish this, cells were treated with D/DA (3.28, 13.12, 52.46, and $209.84{\mu}g/mL$) or with Mitomycin C ($0.1{\mu}/mLg$) as a positive control in the case of no metabolic activation or benzo(a)pyrene ($20{\mu}g/mL$) in the case of metabolic activation. No significant increase in chromosome aberrations was observed in response to treatment with any of these concentrations, regardless of activation of the metabolic system. According to these results, we concluded that D/DA did not induce bacterial reverse mutation or clastogenicity in vitro in the range of concentrations evaluated in these experiments.

Differences in Microbial Activities of Faeces from Weaned and Unweaned Pigs in Relation to In vitro Fermentation of Different Sources of Inulin-type Oligofructose and Pig Feed Ingredients

  • Shim, S.B.;Verdonk, J.M.A.J.;Pellikaan, W.F.;Verstegen, W.A.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.20 no.9
    • /
    • pp.1444-1452
    • /
    • 2007
  • An in vitro experiment was conducted to evaluate the differences in microbial activity of five faecal inocula from weaned pigs and one faecal inoculum from unweaned pigs in combination with 6 substrates. The substrates tested were negative control diet, corn, soybean meal, oligofructose (OF), ground chicory roots and a mixture (60% chicory pulp and 40% OF). The inocula used were derived from pigs fed either a corn-soy based diet without antibiotics (NCON), the NCON diet supplemented with oligofructose (OF), a mixture of chicory pulp (40%) and OF (60%) (MIX), ground chicory roots (CHR) or the NCON diet supplemented with antibiotics (PCON). The cumulative gas production measured fermentation kinetics and end products, such as total gas production, ammonia and volatile fatty acids, were also determined. Both the substrate and the inoculum significantly affected the fermentation characteristics. The cumulative gas production curve showed that different substrates caused more differences in traits of fermentation kinetics than the different inocula. Inocula of weaned pigs gave a significantly higher VFA production compared to the inoculum from unweaned animals, whilst the rate of fermentation and the total gas produced did not differ. OF showed the highest fermentation kinetics and the lowest $NH_3$, pH and OM loss compared to other substrates. It was concluded that the microbial activity was significantly affected by substrate and inoculum. Inoculum from weaned pigs had more potential for microbial fermentation of the carbohydrate ingredients and oligofructose than that of unweaned pigs. A combination of high and low polymer inulin may be more beneficial to the gut ecosystem than using high- or low-polymer inulin alone.

Substituting Bread By-product for Barley Grain in Fattening Diets for Baladi Kids

  • Haddad, S.G.;Ereifej, K.I.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.17 no.5
    • /
    • pp.629-632
    • /
    • 2004
  • The objectives of this study were to determine the effects of substituting bread by-product (BBP) for barley grain in high concentrate fattening diets for kids on nutrient intake, growth performance, and nutrient digestibility. Twenty-eight Baladi kids (body weight=17.1${\pm}$1.0 kg) were assigned randomly to 4 experimental finishing diets (7 kids/treatment) in a completely randomized design for 70 days. The control (CON) diet contained 20, 60, 11, 7 and 2% (DM basis) alfalfa hay, barley grain, soybean meal, corn grain, and mineral and vitamin mix, respectively. Bread by-product substituted barley grain by 10, 20 and 30% of the diet DM in the LBBP, MBBP, and HBBP diets, respectively. Dry matter intakes for the CON, LBBP and MBBP diets were similar (p>0.05; avg.=592 g/day), however, kids fed the HBBP diet had a lower (p<0.05) DM intake (451 g/day). Organic matter and CP intakes showed similar patterns to that observed for DM. Dietary treatments did not affect (p>0.05) average daily gain for kids fed the CON, LBBP and MBBP diets (avg.=150 g/day). Final body weights for kids fed the CON, LBBP and MBBP diets (avg. 27.1 kg) were greater (p<0.05) than for kids fed the HBBP diet (23.7 kg). Feed to gain ratio was greater for the CON, LBBP and MBBP diets (avg. 3.9) compared with the HBBP diet (5.0). No significant (p>0.05) effect of the dietary treatment was observed for DM, OM and NDF digestibility. Substituting BBP for barley grain up to 20% of the diet DM did not affect nutrient intake, growth performance and nutrient digestibility of kids and resulted in a decrease in feed cost.

Effects of two litter amendments on air NH3 levels in broiler closed-houses

  • Atapattu, N.S.B.M;Lakmal, L.G.E.;Perera, P.W.A.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.30 no.10
    • /
    • pp.1500-1506
    • /
    • 2017
  • Objective: High $NH_3$ emissions from poultry houses are reported to have negative impacts on health, welfare and safety of birds and humans, and on the environment. Objective of the present study was to determine the effects of two litter amendments on the $NH_3$ levels in broiler closed houses under hot-humid conditions. Methods: Giving a completely randomize design, nine closed houses, each housed 32,500 birds on paddy husk litter, were randomly allocated into two treatment (Mizuho; a bacterial culture mix and Rydall OE; an enzymatic biocatalyst) and control groups. $NH_3$ levels were determined thrice a day (0600, 1200, and 1800 h), at three heights from the litter surface (30, 90, and 150 cm), at 20 predetermined locations of a house, from day 1 to 41. Results: Rydall significantly reduced the $NH_3$ level compared to control and Mizuho. $NH_3$ levels at 30 cm were significantly higher than that of 90 and 150 cm. The $NH_3$ levels at 30 cm height were higher than 25 ppm level from day 9, 11, and 13 in Mizuho, control, and Rydall groups, respectively to day 41. $NH_3$ levels at 150 cm height were higher than maximum threshold limit of 50 ppm for human exposure from day 12, 14, and 15 in Mizuho, control, and Rydall groups, respectively to day 33. Being significantly different among each other, the $NH_3$ level was highest and lowest at 0600 and 1800 h. Litter amendments had no significant effects on growth performance. Rydall significantly increased the litter N content on day 24. Conclusion: It was concluded that the $NH_3$ levels of closed house broiler production facilities under tropical condition are so high that both birds and workers are exposed to above recommended levels during many days of the growing period. Compared to microbial culture, the enzymatic biocatalyst was found to be more effective in reducing $NH_3$ level.

Growth and Optoelectric Characterization of $CdGa_{2}Se_{4}$ Single Crystal Thin Films by Hot Wall Epitaxy (Hot Wall Epitaxy (HWE)에 의한 $CdGa_{2}Se_{4}$ 단결정 박막 성장과 광전기적 특성)

  • Hong, Kwang-Joon;Park, Chang-Sun
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2001.11b
    • /
    • pp.167-170
    • /
    • 2001
  • The stochiometric mix of evaporating materials for the $CdGa_{2}Se_{4}$ single crystal thin films was prepared from horizontal furnace. To obtain the single crystal thin films, $CdGa_{2}Se_{4}$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the Hot Wall Epitaxy (HWE) system. The source and substrate temperature were $630^{\circ}C$ and $420^{\circ}C$, respectively. The crystalline structure of single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). The carrier density and mobility of $CdGa_{2}Se_{4}$ single crystal thin films measured from Hall effect by van der Pauw method are $8.27{\times}10^{17}cm^{-3},345cm^{2}/V{\cdot}s$ at 293 K, respectively. From the photocurrent spectrum by illumination of perpendicular light on the c-axis of the $CuInSe_{2}$ single crystal thin film, we have found that the values of spin orbit splitting $\Delta$ So and the crystal field splitting $\Delta$Cr were 106.5 meV and 418.9 meV at 10 K, respectively. From the photoluminescence measurement on $CdGa_{2}Se_{4}$ single crystal thin film, we observed free excition (Ex) existing only high Quality crystal and neutral bound exiciton $(D^{0},X)$ having very strong peak intensity. Then, the full-width-at-half-maximum(FWHM) and binding energy of neutral donor bound excition were 8 meV and 13.7 meV, respectivity. By Haynes rule, an activation energy of impurity was 137 meV.

  • PDF

Performance Evaluation of Bridge Deck Materials based on Ordinary Portland Cement Concrete (보통 포틀랜드 콘크리트 기반 교면포장 재료 성능 평가)

  • Nam, Jeong-Hee;Jeon, Seong Il;Kwon, Soo Ahn
    • International Journal of Highway Engineering
    • /
    • v.19 no.6
    • /
    • pp.129-137
    • /
    • 2017
  • PURPOSES : The purpose of this study is to develop bridge deck concrete materials based on ordinary Portland cement concrete, and to evaluate the applicability of the developed materials through material properties tests. METHODS : For field implementation, raw material (cement, fine aggregate, and coarse aggregate) properties, fresh concrete properties (slump and air content), strength (compressive, flexural and bond strength) gain, and durability (freeze-thaw resistance, scaling resistance, and rapid chloride penetrating resistance) performance were evaluated in the laboratory. RESULTS : For the selected binder content of $410kg/m^3$, W/B = 0.42, and S/a = 0.48, the following material performance results were obtained. Considering the capacity of the deck finisher, a minimum slump of 150 mm was required. At least 6 % of air content was obtained to resist freeze-thaw damage. In terms of strength, 51.28 MPa of compressive strength, 7.41 MPa of flexural strength, and 2.56 MPa of bond strength at 28 days after construction were obtained. A total of 94.9 % of the relative dynamic modulus of elasticity after 300 cycles of freeze-thaw resistance testing and $0.0056kg/m^2$ of weight loss in a scaling resistance test were measured. However, in a chloride ion penetration resistance test, the result of 3,356 Coulomb, which exceeds the threshold value of the standard specification (1000 Coulomb at 56 days) was observed. CONCLUSIONS : Instead of using high-performance modified bridge deck materials such as latex or silica fume, we developed an optimum mix design based on ordinary Portland cement concrete. A test construction was carried out at ramp bridge B (bridge length = 111 m) in Gim Jai City. Immediately after the concrete was poured, the curing compound was applied, and then wet mat curing was applied for 28 days. Considering the fact that cracks did not occur during the monitoring period, the applicability of the developed material is considered to be high.

Optimization of a microarray for fission yeast

  • Kim, Dong-Uk;Lee, Minho;Han, Sangjo;Nam, Miyoung;Lee, Sol;Lee, Jaewoong;Woo, Jihye;Kim, Dongsup;Hoe, Kwang-Lae
    • Genomics & Informatics
    • /
    • v.17 no.3
    • /
    • pp.28.1-28.9
    • /
    • 2019
  • Bar-code (tag) microarrays of yeast gene-deletion collections facilitate the systematic identification of genes required for growth in any condition of interest. Anti-sense strands of amplified bar-codes hybridize with ~10,000 (5,000 each for up-and down-tags) different kinds of sense-strand probes on an array. In this study, we optimized the hybridization processes of an array for fission yeast. Compared to the first version of the array (11 ㎛, 100K) consisting of three sectors with probe pairs (perfect match and mismatch), the second version (11 ㎛, 48K) could represent ~10,000 up-/ down-tags in quadruplicate along with 1,508 negative controls in quadruplicate and a single set of 1,000 unique negative controls at random dispersed positions without mismatch pairs. For PCR, the optimal annealing temperature (maximizing yield and minimizing extra bands) was 58℃ for both tags. Intriguingly, up-tags required 3× higher amounts of blocking oligonucleotides than down-tags. A 1:1 mix ratio between up- and down-tags was satisfactory. A lower temperature (25℃) was optimal for cultivation instead of a normal temperature (30℃) because of extra temperature-sensitive mutants in a subset of the deletion library. Activation of frozen pooled cells for >1 day showed better resolution of intensity than no activation. A tag intensity analysis showed that tag(s) of 4,316 of the 4,526 strains tested were represented at least once; 3,706 strains were represented by both tags, 4,072 strains by up-tags only, and 3,950 strains by down-tags only. The results indicate that this microarray will be a powerful analytical platform for elucidating currently unknown gene functions.