• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.2
• /
• pp.446-452
• /
• 1999

Ectopic eruption of the first permanent molar means the first permanent molar assumes an atypical path of eruption resulting in premature atypical resorption of the second primary molar. If the reversible eruption does not occur, early loss of the second primary molars results in space loss, mesial tipping of the first permanent molar, impaction of the second premolar, buccal segment crowding and overeruption of opposing tooth. The main objectives of treatment are (1) to prevent loss of the second deciduous molars so it can continue to serve as a space maintainer and (2) to regain lost arch length, allowing the second premolar to erupt into normal position. The optimal treatment approach depends on a number of factors including the clinical eruption status of /6/, the change in position of /6/, the amount of enamel ledge of /E/ entrapping /6/, the mobility of /E/, and the presence of pain or infection. Unilateral appliance to correct the mesial angulation of ectopic permanent first molars, as in the majority of the appliance designs, would produce a resultant force that would further enhance the space loss. A bilateral support similar to the holding arch design is recommended to maximize the anchorage. These case reports present the successful result of preserving space for the second premolar in treatment of ectopic eruption of the first permanent molar using Halterman appliance with bilateral anchorage on patients visiting department of pediatric dentistry in Samsung Medical Center.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.2
• /
• pp.203-211
• /
• 2008

Minimizing damage to anatomical structure is a prerequisite for skeletal anchorage system to install a miniscrew. This research has focused on evaluating the stability and safety of installation in the maxillary molar buccal area, in which most miniscrews are installed clinically and initial fixation is weak. CT (computerized tomography)images were taken for surveying the possibility of damaging to adjucent teeth in accordance with installation angle. If we install a mini-screw($1.2{\times}6.0mm$) in the maxillary molar buccal area, it would be located generally in the 5~8mm upper of CEJ and 3~5mm inner of the cortical bone surface. We has measured the space between roots And comparison has been made for gender and the space between roots in accordance with the 3 different angles of installation(30 degree, 40 degree, 60 degree) in 3 categories. Category 1 : between 1st molar and 2nd molar Category 2 : between 1st molar and 2nd premolar Category 3 : between 1st premolar and 2nd premolar The result are as follow; 1. The space for category 1 was significantly small. 2. For the installation angle, it was safer to install with steeper angle in category 1 and category 2, but not in category 3. According to these results, the installation a miniscrew in category 2, 3 is safer than in category 1. And it is safer to install with steeper angle in category 1 and category 2.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.359-359
• /
• 2018

이상치는 표본자료에서 크게 어긋나 다른 자료들로부터 떨어져 표시되는 자료로써, 실제로 발생할 확률이 매우 낮은 자료로 정의되고 있다. 설계홍수량을 산정하기 위하여 적용하고 있는 극치계열의 연최대치 강우자료에는 기계오작동 및 엔지니어의 표독오류가 발생하고 있으며, 기후변화에 따른 거대태풍 및 국지적인 집중호우 발생 등으로 인한 극치값 등에서 이상치가 관측되고 있다. 통상 이상치들은 통계분석시 자료 본연의 특성을 왜곡시켜 편향된 결과를 산정할 수 있으므로 빈도해석시 이상치해석 절차를 수행하여 자료의 적정성을 확인하여야 한다. 현재 실무에서는 설계홍수량 산정요령과 하천설계기준 해설 등에서 관련 내용을 기술하고 있지만, 국내 강우자료의 기록연수의 부족으로 인하여 빈도해석시 이상치 해석이 미수행되고 있어 이상치에 따른 자료편의가 발생하면 결과물인 확률강우량이 왜곡되게 산정될 수 있다. 따라서, 본 연구에서는 국내 주요 도시의 강우자료를 이용하여 이상치검정을 수행하였다. 대상지점으로는 서울, 부산, 대전, 대구, 인천, 광주, 울산 등의 비교적 긴 관측년수를 보유하고 있는 광역시를 선정하였으며, 지속기간은 10분, 1~24시간의 25개 강우자료를 적용하였다. 이상치검정 방법으로는 타 방법에 비하여 이상치 검정력이 뛰어난 것으로 알려진 2가지 방법을 채택하였으며, 표본자료의 평균과 표준편차로 표준화된 z값을 이용하여 상 하 한계선를 초과하는 값을 확인하는 z-Score 방법중 향상된 중위수 절대편차(MAD)에 의한 수정 z-Score 방법(Hoaglin, 1993)과 Box-Plot 방법(Tukey, 1969)을 적용하였다. Box-Plot 방법(Tukey, 1969)은 전체 자료를 25%씩 사분위로 구분하는 방법으로 정렬된 자료계열을 중앙값, 박스, 수염(whiskers), 이상치로 구분한다. 정렬된 25~75% 값들을 박스로 포함하여 외곽의 수염값들을 이상치로 분류하며, 특히 사분위수의 도식화로 데이터의 분포를 파악하기 좋으며, 이상치들의 위치와 자료의 비대칭 여부를 쉽게 파악할 수 있다. 본 연구의 수행으로 수정 z-Score 방법의 경우에는 서울과 대구지점에는 이상치가 없으며, 부산지점에는 13개, 대전지점 7개, 인천지점 5개, 광주지점 32개, 울산지점 26개가 나타났다. Box-Plot 방법으로는 서울지점 35개, 부산지점 39개, 대전지점 32개, 대구지점 38개, 인천지점 51개, 광주지점 61개, 울산지점 65개의 이상치가 분석되었다. 연구를 수행한 결과, 수정 z-Score 방법에 비하여 Box-Plot 방법에 의한 이상치가 더 많이 발생하였으며, 각각의 방법으로 지속기간 및 연도별 이상치 발생자료를 확인하였다. 방법별 이상치 발생현황 등을 분석하여 지점별 발생횟수를 분석하였으며, 추후 지점 및 자료의 보완이 수행되면 활용성을 증대시킬 수 있을 것으로 판단된다.

• 치위협보
• /
• s.36
• /
• pp.1-8
• /
• 2000

• The Journal of the Korea Contents Association
• /
• v.10 no.7
• /
• pp.285-296
• /
• 2010

This study was implemented among 100 students of C College of Public Health who have healthy permanent dentition in order to measure the morphology and sizes of clinical crowns of permanent maxillary molars. The following are conclusions of this study. 1. The cusp height, crown width, crown thickness of clinical crowns appeared to be bilaterally symmetrical. 2. The strong development of the buccal groove showed to be superior in the right first molar. The appearance rate of the buccal pit was high in the right first molar also. 3. The type 4th cusp appeared as 100% in the left and right first molars, and 78%, 75% in the left and right second molars respectively. 4. The distal lingual cusp(DLC) size were bilaterally symmetrical in the type 4th cusp. 5. As for the distance between two cusp tips, it was large between mesial cusp tips in all of the first and second molars at both sides. 6. Development of the Carabelli's cusp was high in both the left and right first molars. 7. The appearance rate of the oblique ridge was 87.0% in the right first molar, 73.0% in the right second molar, 88.0% in the left first molar, and 73.0% in the left second molar. This is considered to be caused by people who have mild dental crown caries in their first molars. 8. The appearance rate of the mesial marginal ridge tubercle(DMRT) was high in both of the left and right first molars. That of the distal tubercle was 16.0% in the right first molar, 26.0% in the right second molar, 14.0% in the left first molar, and 21% in the left second molar.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.2
• /
• pp.217-223
• /
• 2005

The term 'impaction teeth' is used to designate a tooth which remains unerupted in jaw beyond the time at which it should normally be erupted. Most cases of impacted teeth reported in the literature are permanent teeth. The impaction of primary teeth occur rarely whereas impaction of second primary molars is more numerous than all other impactions. Failure of eruption of primary teeth may cause a number of complications, such as interference with development and eruption of successive permanent teeth, malocclusion, cystic change of tooth follicle. The clinican should consider the various treatment option available (a) No treatment and observation, (b) surgical extraction (c) space regainer. Proper treatment plan should be established after thought consideration of impacted tooth and it's relation with successive permanent tooth.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.2
• /
• pp.136-143
• /
• 2004

The purpose of this study was to investigate the relationship between morphology and position of deciduous double teeth, and the occurrence of other dental anomalies in the same subject. Four morphological types were indentified according to Ailing's classification: type I, bifid crown-single root; type II, large crown-large root; type III, two fused crowns-single root; type IV, two fused crowns-two fused roots. Fifty-four double teeth were found in a total of 1,803 children, who had visited Wonkwang university hospital for dental treatment from January 1, 2003 to September 30, 2003. All of these children were examined clinically and intra-oral radiographs were taken. The results were as follows; 1. 49 children(2.7%) had more than one double teeth, 5 of these children had two double teeth on the bilateral side. And one child showed triple teeth which has three crowns and three roots. 2. Double teeth were predominantly situated in the anterior region, with a preference for the mandible. The ratio of cases involving central incisor and lateral incisor was higher than other cases. 3. There were 25 cases(46.2%) of missing successors among 54 cases of the double teeth. And, prevalence of the missing teeth was highest in the cases involving maxillary central incisor and lateral incisor. 4. In the case of type II(large crown-large root) had more missing successors.

• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.3
• /
• pp.415-430
• /
• 1996

The purpose of this study was to evaluate the stress distributions in the surrounding tissues of the teeth seated by indirect retainers in three different teeth of unilateral distal extension partial denture when the dislodging forces were applied on denture bases. Three dimensional photoelastic models were made. The teeth on which indirect retainers were seated were mandibular left lateral incisor (Model I), canine (Model II), and first premolar (Model III). The dislodging force with 860mg at $45^{\circ}$ angulation to occlusal plane was applied to each model. Three dimensional photoelastic stress analysis was done, and the records were diagramed and analysed. The results were as follows : The compressive stresses were shown the most on neck portions of buccal, mesial, and distal sides in all three models. Slight tensile stresses were shown on neck portions of lingual sides in all three models. The compressive stresses on buccal side were shown in strength in such order as model I, model II, and model III. The compressive stresses were shown on neck portion of mesial and distal sides of model I and mode II, with model I more than Model II. The compressive stresses were shown only on neck portion of mesial side on Model III. The general overall magnitude of compressive stresses were shown in strength in such order as Model I, Model II, and Model III.

• Journal of dental hygiene science
• /
• v.7 no.4
• /
• pp.207-211
• /
• 2007

Many studies reported that the presence of cervical enamel projection (CEP) in cemento-enamel junction(CEJ) is greatly related to periodontal disease. The aim of this study was to investigate the prevalence of enamel projections in buccal, mesial, distal and lingual(palatal) surface of maxillary and mandibular first and second molars on extracted teeth. Among 660 teeth extracted due to the periodontal disease and dental caries in Seoul National University Dental Hospital was examined, 530 teeth which has distinct CEJ were examined with 8 times x electronic magnifier by one examiner. The prevalence of CEP for maxillary teeth (45.49%) was higher than that of mandible (39.62%). The first molar (45.22%) had more CEP than second (39.89%). Furthermore, buccal surface had highest incidence of CEP than other surfaces. The results of this study imply that the clinicians should take good care of the prevalence of CEP when scaling or root planning, plaque control instruction and periodontal surgery.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.6
• /
• pp.876-880
• /
• 2008

Outliers are the observations which are very larger or smaller than most observations in the given data set. These are shown by some sources. The result of the analysis with outliers may be depended on them. In general, we do data analysis after removing outliers. But, in data mining applications such as fraud detection and intrusion detection, outliers are included in training data because they have crucial information. In regression models, simple and multiple regression models need to eliminate outliers from given training data by standadized and studentized residuals to construct good model. In this paper, we use support vector regression(SVR) based on statistical teaming theory to analyze data with outliers in regression. We verify the improved performance of our work by the experiment using synthetic data sets.