• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.15.1-15.1
• /
• 2005

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.6.1-6.1
• /
• 2005

• Proceedings of the SAREK Conference
• /
• 2005.06a
• /
• pp.128-128
• /
• 2005

• Journal of the KSME
• /
• v.47 no.5 s.318
• /
• pp.51-57
• /
• 2007

• 기계와재료
• /
• v.20 no.3
• /
• pp.72-79
• /
• 2008

• 보일러설비
• /
• s.69
• /
• pp.78-82
• /
• 1999

• 보일러설비
• /
• s.54
• /
• pp.88-89
• /
• 1998

• Journal of the Korean Society of Propulsion Engineers
• /
• v.8 no.4
• /
• pp.16-25
• /
• 2004

Theoretical analysis for predicting the heat transport limitation of a copper powder sintered wick heat pipe was performed. The heat pipe diameter was 8mm and water was used for working fluid. The particle diameter was classified by 5 different meshes, and each capillary pressures and heat transport limitations. thermal resistances were analyzed according to the operating temperatures, wick thicknesses and inclination angles, based on the effective capillary radius($r_c$), porosity($\varepsilon$), Permeability (K). The wick capillary limitation was increased according as the particle diameter and the wick thickness and the operating temperature were increased. As the porosity and the capillary radius were larger. then the heat transport limitation was higher. The thermal resistance was greatly increased according as the wick thickness was increased.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.11
• /
• pp.907-914
• /
• 2014

The objective of this study was to increase the generating efficiency of concentrated photovoltaics (CPV) by using hybrid solar tracking. Further, the proposed system was demonstrated to have the ability to extract thermal energy from a concentrated photovoltaic system by using thermal absorbers containing heat pipe, which could then be used for a heating system or hot-water supply. The average electrical efficiency was 16 during the day, and the average thermal efficiency was 62. Therefore, this system demonstrated a total efficiency (electrical thermal) of 78. All the processes, i.e., tracking of the sun, calculation of the sun's position, reinstatement of the heating device toward the east for tracking on the next day, and system shutdown, were programmed using Simulink. A parametric analysis of the heat pipe, concentration ratio, and inlet velocity was also performed in terms of the operating temperature of the CPV and the outlet temperature. The simulation and experimental results for the thermal absorber were found to be in good agreement.

• Proceedings of the KIEE Conference
• /
• 2002.11a
• /
• pp.242-244
• /
• 2002

고집적 반도체 소자에서 발생하는 열의 효과적인 전달을 위한 구리 모재의 초소형 히트파이프를 제작하였다. 제작된 초소형 히트 파이프는 높이 100 ${\mu}m$의 채널 어레이가 형성되어 있는 하부 구리 기판과 그것을 덮는 상부 구리 기판으로 구성된다. 채널의 개수는 44개이고. 길이는 24 mm이다. 하부 구리 기판 위에 음성 후막 감광제 JSR THB 151N을 도포하고 사진 현상 공정으로 미세 채널 몰드를 형성한 후, 구리 전기 도금을 이용하여 채널 격벽을 제작한다. 미세 채널 몰드는 습식 방법으로 완전하게 제거된다. 제작된 하부 구리 기판은 에폭시로 상부 구리 기판과 부착 후 옆면에 구리 전기 도금으로 완전히 접합한다.