• Title/Summary/Keyword: 희석 인자

Search Result 114, Processing Time 0.026 seconds

Analysis of Flushing Effects for Input Contaminants in River (하천에 유입된 오염물질의 플러싱 효과 분석)

  • An, Yong Min;Kim, Soo Youl;Lee, Joon Ho;Yoon, Sei Eui
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2004.05b
    • /
    • pp.1361-1365
    • /
    • 2004
  • 오염물질의 유입 유형은 일정한 농도를 가진 오염물질이 일정한 비율로 연속적으로 유입되는 경우와 순간적으로 특정한 농도를 가진 오염물질이 하천으로 유입되는 경우로 나눌 수 있다. 본 연구에서는 오염물질에 대해 댐 방류량을 일시적으로 증가시켜서 희석 및 세척시키는 플러싱(flushing) 효과에 관하여 연구하였다. 실측한 수리인자를 이용하여 적용성이 크다고 발표된 경험식에 의하여 확산계수를 결정하였다. 플러싱에 의한 오염물질의 희석정도 및 확산특성을 파악하기 위해서 RMA-4 모형을 잠실수중보$\~$신곡수중보 구간에 적용하였다. 정체되어있는 경우와 순간적으로 유입되는 경우, 성산대교 부근에서 농도가 1ppm이하로 감소하는 시간을 각 유량별로 분석하였다. 댐 방류량에 의한 플러싱을 시도한 경우에 본류의 오염물질이 지류로 역류하는 범위를 파악할 수 있었다.

  • PDF

Evaluation of Roadmap Image Quality by Parameter Change in Angiography (혈관조영검사에서 매개변수 변화에 따른 Roadmap 영상의 화질평가)

  • Kong, Chang gi;Song, Jong Nam;Han, Jae Bok
    • Journal of the Korean Society of Radiology
    • /
    • v.14 no.1
    • /
    • pp.53-60
    • /
    • 2020
  • The purpose of this study is to identify factors affecting picture quality in Roadmap images, which were studied by varying the dilution rate, collimation field and flow rate of contrast medium. For a quantitative evaluation of the quality of the picture, a 3mm vessel model Water Phantom was self-produced using acrylic, a roadmap image was acquired with a self-produced vascular model Water Phantom, and the SNR(Signal to Noise Ratio) and CNR (Contrast to Noise Ratio) were analyzed. CM:N/S In the study on the change of dilution rate, CM:N/S dilution rate changed to (100%~10%:100%), and the measurement of the roadmap image taken using the vascular model Water Phantom showed that the measurement value of SNR gradually decreased as the N/S dilution rate was increased, and the measurement of CNR was gradually reduced. It was confirmed that the higher the dilution rate of CM:N/S, the lower the SNR and CNR, and also significant image can be obtained at the dilution rate of CM:N/S (100%~70:30%). The study showed the value of SNR and CNR in Roadmap image was increased as the Collimation Field was narrowed to the center of the vascular phantom; the Collimation Field was narrowed to the center of the vessel model by 2cm intervals to 0cm through 12cm. To verify the relationship with Roadmap image and Flow Rate, volume of the autoinjector was kept constant at 15 and the flow rate was gradually increased 1, 2, 3, 4, 5, 6, 7, 8, 9, 10. The value of SNR and CNR of images taken by using water Phantom gradually decreased as the Flow Rate increased, but at Flow Rate 9 and 10, the SNR and CNR value was increase. It was not possible to confirm the relationship with SNR and CNR by ROI mean value and Background mean value. It is considered that further study is needed to evaluate the correlation about Roadmap image and Flow Rate. In conclusion, as the dilution rate of N/S in contrast medium was increased, the value of SNR and CNR was decreased. The narrower the Collimation Field, the higher image quality by increasing value of SNR and CNR. However, it is not confirmed the relationship Roadmap image and Flow Rate. It is considered that appropriate contrast medium concentration to minimize the effects of kidney and proper Collimation Field to improve contrast of image and reduce exposure X-ray during procedure is needed.

The Optimum Solution for the Best Performance of ABS (ABS수지 성능 최적화 방안)

  • Mun, Hong-Guk;Kim, Dae-Su
    • Polymer(Korea)
    • /
    • v.31 no.2
    • /
    • pp.105-110
    • /
    • 2007
  • We investigated resin, thinner, painting, and injection for analyzing the chemical effect of polymer, and made the optimum solution with the best performance of ABS (acrylonitrile butadiene styrene) resin. The effect depended on chemical material especially its chemical and physical properties instead of mechanical transformation. When we looked over ABS resin, injection, chemical material and painting, we found out thinner was the main factor for painting problem. Throughout this test, we could solve the problem, secure the system for control process and drop many factors for changing quality.

A Study for Algorithm of Safe Transmission in Distributed Network (분산 네트워크에서 안전한 전송을 위한 알고리즘에 관한 연구)

  • Kim, Tae-Kyung;Seo, Hee-Suk;Lee, Dong-Young
    • Journal of the Korea Society for Simulation
    • /
    • v.18 no.1
    • /
    • pp.35-40
    • /
    • 2009
  • The reliability of processing the distributed application becomes more and more important issues in distributed network as the usage of distributed network increases. Because the distributed network applications are processed in the available resources of Internet. It is important factors that the user can efficiently access the available resources and processed results can be delivered to the user of job request. Therefore in this paper, we suggested the survivability factor for sending data safely whether it can be efficiently accessed between the user and available resource which processes the distributed application. And evaluated the performance of the suggested factor using the data transmission time. Also we suggested the transmission algorithm for safe transmission using the survivability factor.

A Comparative Study on Quantifying Uncertainty of Vitamin A Determination in Infant Formula by HPLC (HPLC에 의한 조제분유 중 비타민 A 함량 분석의 측정불확도 비교산정)

  • Lee, Hong-Min;Kwak, Byung-Man;Ahn, Jang-Hyuk;Jeon, Tae-Hong
    • Korean Journal of Food Science and Technology
    • /
    • v.40 no.2
    • /
    • pp.152-159
    • /
    • 2008
  • The purpose of this study was to determine the accurate quantification of vitamin A in infant formula by comparing two different standard stock solutions as well as various sample weights using high performance liquid chromatography. The sources of uncertainty in measurement, such as sample weight, final smaple vloume, and the instrumental results, were identified and used as parameters to determine the combined standard uncertainty based on GUM(guide to the expression of uncertainty in measurement) and the Draft EURACHEM/CITAC Guide. The uncertainty components in measuring were identified as standard weight, purity, molecular weight, dilution of the standard solution, calibration curve, recovery, reproducibility, sample weight, and final sample volume. Each uncertainty component was evaluated for type A and type B and included to calculate the combined uncertainty. The analytical results and combined standard uncertainties of vitamin A according to the two different methods of stock solution preparation were 627 ${\pm}$ 33 ${\mu}$g R.E./100 g for 1,000 mg/L of stock solution, and 627 ${\pm}$ 49 ${\mu}$g R.E./100 g for 100 mg/L of stock solution. The analytical results and combined standard uncertainties of vitamin A according to the various sample weighs were 622 ${\pm}$ 48 ${\mu}$g R.E./100 g, 627 ${\pm}$ 33 ${\mu}$g R.E./100 g, and 491 ${\pm}$ 23 ${\mu}$g R.E./100 g for 1 g, 2 g, and 5 g of sampling, respectively. These data indicate that the preparation method of standard stock solution and the smaple amount were main sources of uncertainty in the analysis results for vitamin A. Preparing 1,000 mg/L of stock solution for standard material sampling rather than 100 mg, and sampling not more than 2 g of infant formula, would be effective for reducing differences in the results as well as uncertainty.

Quantifying Uncertainty of Calcium Determination in Infant Formula by AAS and ICP-AES (AAS 및 ICP-AES에 의한 조제분유 중 칼슘 함량 분석의 측정불확도 산정)

  • Jun, Jang-Young;Kwak, Byung-Man;Ahn, Jang-Hyuk;Kong, Un-Young
    • Korean Journal of Food Science and Technology
    • /
    • v.36 no.5
    • /
    • pp.701-710
    • /
    • 2004
  • Uncertainty was quantified to evaluate calcium determination result in infant formula with AAS (Atomic Absorption Spectrometry) and ICP-AES (Inductively Coupled Plasma-Atomic Emission Spectrometry). Uncertainty sources in measurand, such as sample weight, final volume of sample, sample dilution and the instrumental result were identified and used as parameters for combined standard uncertainty based on the GUM (Guide to the expression of uncertainty in measurement) and Draft EURACHEM/CITAC Guide. Uncertainty components of each sources in measurand were identified as resolution, reproducibility and stability of chemical balance, standard material purity, standard material molecular weight, standard solution concentration, standard solution dilution factor, sample dilution factor, calibration curve, recovery, instrumental precision, reproducibility, and stability, Each uncertainty components were evaluated by uncertainty types and included to calculate combined uncertainty. The kinds of uncertainty sources and components in the analytical method by AAS and ICP-AES were same except sample dilution factor for AAS. The analytical results and combined standard uncertainties of calcium content were estimated within the certification range $(367{\pm}20\;mg/100g)$ of CRM (Certified Reference Material) and were not significantly different between method by AAS followed by ashing and method by ICP-AES followed by acid digestion as $359.52{\pm}23.61\;mg/100g\;and\;354.75{\pm}16.16\;mg/100g$, respectively. Identifying uncertainty sources related with precision, repeatability, stability, and maintaining proper instrumental conditions as well as personal proficiency was needed to reduce analytical error.

Estimation of Measurement Uncertainty in Vitamin C Analysis from Vegetable and Fruit Juice (야채음료 중 비타민 C 분석에 있어서의 측정불확도 추정)

  • Kim, Young-Jun;Kim, Hyeon-Wee
    • Korean Journal of Food Science and Technology
    • /
    • v.35 no.6
    • /
    • pp.1053-1059
    • /
    • 2003
  • This study aimed to determine the amount of vitamin C from vegetable & fruit juice by high performance liquid chromatograhy (HPLC). Components for estimation of measurement uncertainty associated with the analysis of vitamin C, such as standard weight, purity, molecular weight, dilution of standard solution, calibration curve, recovery, and precision, were importantly applied. The estimation of uncertainty obtained with systematic and random error based on the GUM (Guide to the expression of uncertainty in measurement) and EURACHEM document with mathematical calculation and statistical analysis. The components, evaluated ty either Type A or Type B methods, were combined to produce an overall value of uncertainty known as the combined standard uncertainty. An expanded uncertainty was obtained by multiplying the combined standard uncertainty with a coverage factor (k) calculated from the effective degree of freedom. The content of vitamin C from vegetable and fruit juice was 27.53 mg/100g and the expanded uncertainty by multiplying by the coverage factor (k, 2.06) was 0.63 mg/100g at a 95% confidence level. It was concluded that the main sources were, in order of recovery and precision, weight and purity of the reference material, dilution of the standard solution, and calibration curve. Careful experiments on other higher uncertainties is further needed in addition to better personal proficiency in sample analysis in terms of accuracy and precision.

동결정액을 이용한 싸움소 생산

  • 정연길;송해범;김종열
    • Proceedings of the Korean Society of Embryo Transfer Conference
    • /
    • 2002.11a
    • /
    • pp.93-93
    • /
    • 2002
  • 싸움소(투우)는 1999년 문화관광부지정‘한국의 10대 지역문화 관광축제’로 선정되어, 청도군 투우대회가 한국을 대표하는 축제가 되었고, 상설투우장의 건설로 새로운 레져 산업으로 부상하고 있다. 그러나 싸움소 생산에 소요되는 유전인자 보존 및 생산기반은 전무한 실증이며, 본 연구는 청도군내 우수 종모우을 선별하여 정액채취 및 동결정액을 생산하여 군내 한우번식 농가에서 인공수정을 실시하고 계절별 수태율과 송아지의 성비를 조사하였다. 종모우 번개(나이6세, 체중850kg, 97, 98년 우승)와 사자(나이6세, 체중870kg 98, 99년 준우승) 2두로부터 일반적인 방법으로 인공질을 이용하여 1999년 10월에 정액을 채취하였다. 채취된 정액은 35$^{\circ}C$에서 3~5배정도로 희석하여 정자농도와 활력을 평가하였다. 희석정액은 90분간에 걸처 5$^{\circ}C$ 까지 냉각하면서 글리세롤을 첨가한 난황구염산나트륨액으로 여러번 나누어 희석하여 정자의 충격을 피하였다. 글리세롤평형 2시간 후 0.5$m\ell$스트로에 정자수가 3500만/스트로의 분주.봉인하여, 정액의 동결은 액체질소상에서 4~5cm 위에 스트로를 평행으로 놓아 액체질소 가스로 10~15분간 예비동결한 다음, -8$0^{\circ}C$의 초저온 냉장고에서 케니스터에 넣어 -196$^{\circ}C$ 액체질소에 보관하였다. 인공수정을 실시하고 40일 전후에 직장검사를 통해 임신율과 수태율을 조사하고 분만한 송아지의 성비를 기록하였다. 채취한 싸움소의 정액량은 번개와 사자가 각각 평균 4.6$m\ell$와 3.8$m\ell$이고, 동결전의 정자의 활력은 번개와 사자의 정액이 각각 70.3 vs 75.3%, 동결후의 활력은 37.3 vs 40.3%로 유의한 차이는 없었다. 번개와 사자의 동결정액으로 각각 44두와 127두를 인공 수정하였고, 40일 전후의 임신율은 26두 vs 80두(59.1 vs 63.0% )였으며, 수태율은 26두 vs 66두(59.1 vs 52.0% )로 이들간의 유의한 차이는 없었다. 번개와 사자의 수송아지의 성비는 각각 65.3 vs 42.4%로 유의한 차이가 있었다. 싸움소 정액 동결보존과 인공수정으로 싸움소 혈통을 가진 송아지가 생산되었다. 그러나 생산된 송아지가 싸움소의 능력을 가진 것을 선별하여 혈통을 고정시키고, 훈련으로 싸움소의 제질을 발굴하는 것이 앞으로의 연구과제이다.

  • PDF

Uncertainty evaluation for the determination of creatinine in urine by LC-MS/MS (LC-MS/MS를 이용한 소변 중 크레아티닌 분석의 측정불확도 평가)

  • Kim, Jin-Young;Kwon, Woon-Yong;Suh, Sung-Ill;In, Moon-Kyo
    • Analytical Science and Technology
    • /
    • v.25 no.1
    • /
    • pp.83-90
    • /
    • 2012
  • The objective of the study was to estimate the measurement uncertainty associated with determination of creatinine (Cr) in urine samples by liquid chromatography-tandem mass spectrometry (LC-MS/MS). Centrifuged urine samples (10 ${\mu}L$) were diluted with 390 ${\mu}L$ of distilled water. To 20 ${\mu}L$ aliquots of diluted urine samples, 30 ${\mu}L$ of internal standard solution (Cr-$d_3$, 5 ${\mu}g/mL$) and 10 ${\mu}L$ of acetonitrile were added and filtered. The samples (1 ${\mu}L$) were introduced into LC-MS/MS with no further pretreatment. Cr was separated on a multi-mode ODS column (Scherzo SM-C18, 75 ${\times}$ 2.0 mm I.D., 3 ${\mu}m$) and quantified by LC-MS/MS operating in MRM mode (Cr, m/z 114.0${\rightarrow}$ 86.0; Cr-$d_3$, m/z 117.0${\rightarrow}$ 89.1). The four factors that contribute uncertainty to the final result were extracted and evaluated. The principal factors of contribution to combined standard uncertainty were sample dilution, calibration curve and repeatability, while the preparation of standard solution was only a minor factor. Relative extended uncertainty of the measured concentration was 14.2% in a real urine sample.