• Journal of Korean Ophthalmic Optics Society
• /
• v.17 no.1
• /
• pp.99-105
• /
• 2012

Purpose: The purpose of this study is to demonstrate inactivation effect of UVA-LED ultraviolet radiation upon Pseudomonas aeruginosa and Staphylococcus aureus which are the major bacteria causing eye diseases. Methods: The small sterilization device was made using UVA-LED of 400 nm. After Pseudomonas aeruginosa was diluted to $10^{-7}$ and Staphylococcus aureus to $10^{-5}$ and diluted solutions were put onto each liquid medium. They were irradiated by 400 nm of UVA for different amount of time; 15 min, 30 min, 60 min, 120 min, 240 min, 360 min and 480 min each. Results: The data from sterilization test was solved to regression line equation and the target log inactivation was obtained. The 3 log inactivation UV irradiation value of Pseudomonas aeruginosa was 54,847 UV dose ($mJ/cm^2$) and irradiation time was 135.42 min while the 3 log inactivation of Staphylococcus aureus was 39,066 UV dose ($mJ/cm^2$) and irradiation time was 98.72 min. Conclusions: The inactivation effect of sterilization method using 400 nm of UVA-LED upon Pseudomonas aeruginosa and Staphylococcus aureus has been verified and it is considered as a useful method in inactivating the contact lenses.

• Research in Plant Disease
• /
• v.7 no.3
• /
• pp.155-163
• /
• 2001

Two attenuated Cucumber mosaic virus (CMV) isolates, Paf-CMV and Rs2-CMV that had been selected from CMV isolates associated with satellite RNA (satRNA) were tested for cross-protection effect in pepper plants. The viruses selected as attenuated strains appeared to be identical serologically and physically to the challenge virus (Mf-CMV), but they were lower in the dilution end-point of infectivity of crude sap than Mf-CMV When symptoms were observed in several indicator plants after inoculation, Paf-CMV and Rs2-CMV were symptomless or showed mild mosaic symptoms while another satRNA isolate Ap-CMV developed severe mosaic symptoms on the leaves as Mf-CMV. The nucleotide sequences of the satRNAs were determined by sequencing full-length cDNA clones. Paf-, Rs2- and Ap-satRNAs were 386, 335, and 347 nucleotides long, respectively, The sequences were then compared with the other known Y-satRNA, revealing that nucleotide sequences of the satRNAs consisted of 5'- and 3'-terminal conserved regions. However variations occurred on the middle regions of the sequences, especially those related to symptom interference, showing significant differences between Paf-satRNA and other isolates. Infectious transcripts of Paf-satRNA and Rs2-satRNA induced mild mosaic symptoms in pepper plants when supported by genomic RNAs of Mf-CMV. Under greenhouse conditions, Paf-CMV and Rs2-CMV were tested for cross-protection effect in pepper and tobacco (Nicotiana tabacum cv, Xanthi nc) plants against Mf-CMV. No symptoms were developed on the plants vaccinated with Paf-CMV until 3 weeks after inoculation with the virulent strain; however another attenuated isolate, Rs2-CMV, showed less effectiveness in cross-protection. Depending on the concentration of the challenged virus, symptoms sometimes appeared later in the upper leaves. However, in plants challenged with low concentrations (below 0.2 mg/ml) of the challenge inoculum, symptoms caused by the virulent strain did not develop on the plants vaccinated with Paf-CMV. In the field experiments, the number of pepper plants with severe mosaic symptoms in the control plots was progressively increased after transplanting and reached approximately 50% after 50 days. On the other hand, the incidence of mosaic disease appeared very low on the plants that had received the protective inoculation with Paf-CMV.

• Korean Journal of Organic Agriculture
• /
• v.21 no.4
• /
• pp.725-736
• /
• 2013

In order to acquire morphological characteristics and genetic characteristics of pathogen that causes anthrax to chestnut, anthrax was separate and identified in Gongju, chungnam chestnut plantation. Antagonistic microorganisms and plant extracts were selected for control of anthrax. Medium maturing variety treatment of 250 dilution fold in field was control at 71.2% and treatment of 500 dilution fold was control at 64.4% and treatment of 1000 dilution fold was control at 40.7%. Storage control value of Jabong in $25^{\circ}C$ after treatment in field is 61.7% at 250 dilution fold, 62.8% at 500 dilution fold, 40.9% at 1000 dilution fold treatment.

• Journal of Digital Convergence
• /
• v.18 no.6
• /
• pp.45-52
• /
• 2020

This study ranked the degree to which flipped learning contributes to each learning area and, in contrast, to quantitatively examine how effectively these learning methods are used in flipped learning, had four-year university computer majors receive flipped learning. Existing flipped learning experiments have proven effectiveness, while there are also negative effects on effectiveness, which has led to a lot of debate. Effective experiments and classes therefore require more research and an accurate understanding of flipped learning. Analysis of the 123 samples recruited shows that flipped learning contributes to learning is in order of self-directing, collaboration, watching videos, and learning by teachers. Regression analysis of the degree to which learning method affects flipped learning effectiveness resulted in order of self-directed learning, lecture videos, and collaborative learning. This shows that flipped learning not only has the greatest influence on self-directed learning, but also self-directed learning has the greatest influence on flipped learning. It can also see that a collaborative learning and the role of video to prior learning tool is important. Through this study, we hope to understand flipped learning correctly and set learning methods and achievement goals. It is necessary to analyze the interaction between flipped learning and subdivided classroom activities.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.1
• /
• pp.36-42
• /
• 2005

This study examined the feasibility of producing sulfuric acid and ammonia water from ammonium sulfate solution using two-compartment electrodialysis with a bipolar membrane (EDBM). Electrodialysis experiments were carried out with 20 wt% ammonium sulfate at different current densities and sulfuric acid concentrations in a concentrate compartment. The current efficiency increased with the current density from 25 to $100\;mA/cm^2$. Nevertheless, the efficiency was relatively low compared with that of general desalting electrodialysis, owing to the diffusion of sulfuric acid from the concentrate compartment to the diluate. The diffusion rate through the anion exchange membrane increased with the sulfuric acid concentration in the concentrate compartment, which decreased the current efficiency. Conversely, the electrical resistance decreased with increasing current density owing to the Joulian heat generated during water dissociation in the transition region of the bipolar membrane under a high electric field. From the experimental results, we concluded that operating at a higher current density is effective from the perspective of current efficiency and electrical resistance when producing sulfuric acid and ammonia water from ammonium sulfate using a two-compartment EDBM process. Further studies on the effects of increasing the sulfuric acid concentration on current efficiency are required to apply the EDBM process practically.

• Journal of the Korea Concrete Institute
• /
• v.16 no.6 s.84
• /
• pp.841-850
• /
• 2004

The modeling of uplift pressure within dam, on the foundation on which it was constructed, and on the interface between the dam and foundation is a critical aspect in the analysis of concrete gravity dams, i.e. crack stability in concrete dam can correctly be predicted when uplift pressures are accurately modelled. Current models consider a uniform uplift distribution, but recent experimental results show that it varies along the crack faces and the procedures for modeling uplift pressures are well established for the traditional hand-calculation methods, but this is not the case for finite element (FE) analysis. In large structures, such as dams, because of smaller size of the fracture process zone with respect to the structure size, limited errors should occur under the assumptions of linear elastic fracture mechanics (LEFM). In this paper, the fracture behaviour of concrete gravity dams mainly subjected to uplift Pressure at the crack face was studied. Triangular type, trapezoidal type and parabolic type distribution of the uplift pressure including uniform type were considered in case of evaluating stress intensity factor by surface integral method. The effects of body forces, overtopping pressures are also considered and a parametric study of gravity dams under the assumption of LEFM is performed.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.8
• /
• pp.492-497
• /
• 2015

VOCs (Volatile Organic Compounds) are generally generated in the painting process, or at the company and laundry where use organic solvents. The VOCs consist of various hydrocarbons and has low calorific value due to its dilution with atmospheric air. Therefore, the VOCs are difficult to burn by a conventional fuel combustor. In this study, a novel plasma dump combustor was proposed for the treatment of low calorific VOC gases. This combustor was designed a combination of the characteristics in a plasma burner, a dump combustor and a 3D matrix burner. The combustor has good structure for maintaining enough residence time and reaction temperature for stable flame formation and VOC destruction. For investigating the performance characteristics of the plasma dump combustor, an experiment was achieved for VOC feed rate, VOC injector position, etc. Toluene was used as a surrogate of VOC. The novel combustor gave better performance than a conventional combustor, showing that VOC destruction rate and energy efficiency were 89.64% and 12.27 kg/kWh respectively, at feeding rate of 450 L/min of VOC of 3,000 ppm of toluene concentration.

• Journal of Navigation and Port Research
• /
• v.32 no.8
• /
• pp.637-643
• /
• 2008

When planning outfall system, the first target cif design is to maximize initial dilution of discharge effluent. To achieve the target effectively, the characteristics of mixing phenomenon between ambient and discharged water should be analyzed. Especially the analysis at the Near-Field-Region(NFR) as initial dilution zone should be preceded. Usually, the initial behavior of effluent through outfall system is rising toward the surface due to mixing with ambient water for heat discharge and sinking toward the bottom due to the difference of density for brine discharge. After mixed with eddies accompanied by the ambient water, the plumes are showing the same density and internal current pattern by advection and diffusion. Until recently, lots of studies are being carried out for the optimum design of outfall system. but it is difficult to find any studies of heat and brine discharge at the same time. Therefore, this study is hoped to provide some basic data for optimum design of outfall system.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.4
• /
• pp.409-416
• /
• 2011

A mobile emission laboratory (MEL) was designed to measure the amount of traffic pollutants with high temporal and spatial resolution under real conditions. Equipment for gas-phase measurements of quantity of CO, NOx, $CO_2$, and THC and for the measurement of the number density and size distribution of fine and ultra-fine particles by a FMPS and a CPC were placed in a mini-van. The exhaust of different type of vehicles can be sampled by MEL. This paper describes the construction and technical details of the MEL and presents data from the experiment in which a car chases city buses fuelled by diesel, CNG, and LPG. The diameters of most particles in the exhaust of the diesel city bus were less than 300 nm and most of the particles had a diameter of 30-60 nm. However, most particles in the exhaust of the CNG and LPG city buses were nanoparticles (diameter: less than 50 nm).

• Journal of Radiation Protection and Research
• /
• v.38 no.3
• /
• pp.132-137
• /
• 2013

Cryogenic particle detectors have recently been adopted in radiation detection and measurement because of their high energy resolution. Many of these detectors have demonstrated energy resolutions better than the theoretical limit of semiconductor detectors. We report the development of alpha spectrometer using a micro-fabricated magnetic calorimeter coupled to a large-area particle absorber. A piece of gold foil of $2{\times}2{\times}0.05mm^3$ was glued to the paramagnetic temperature sensor made of sputtered Au:Er film to serve as an absorber for incident alpha particles. We performed experiments with 241Am source at cryogen free adiabatic demagnetization refrigerator (CF-ADR). A high energy resolution of 6.8 keV in FWHM was obtained for 5.5 MeV alpha particles.