• Title/Summary/Keyword: 흡착율

Search Result 867, Processing Time 0.023 seconds

Application of the Distribution Law to Soil-Pesticide Systems (토양농약계(土壤農藥系)에 대(對)한 분배법칙(分配法則)의 적용(適用))

  • Shin, Young Oh;Baker, John H.
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.7 no.1
    • /
    • pp.1-4
    • /
    • 1974
  • The application of the Distribution Law to soil-pesticide systems yielded the following empirical implications : 1) The amount of the pesticide adsorbed by a soil is negatively proportional to the soil water content. 2) At a given soil water content the amount adsorbed is proportional to the Kd of the soil. 3) The effect of soil water content on the amount of the pesticide adsorbed diminishes with increasing magnitude of the Kd.

  • PDF

A Study on the Removal of Phenol by Hybrid Process coupling adsorption with microfiltration (흡착과 정밀여과의 혼성공정에 의한 페놀 제거에 관한 연구)

  • ;;Fane, A. G.
    • Membrane Journal
    • /
    • v.6 no.2
    • /
    • pp.109-116
    • /
    • 1996
  • This work is a fundamental study for applying hybrid process coupling adsorption with microfiltration to waste-water treatment. Phenol was separated by adsorption on powdered activated carbon, adsorbed phenol with activated carbon was separated by microfiltration. As the particle size in suspension increased, filtration resistance decreased, and effect of particle concentration on resistance was less pronounced. The rate of uptake was greatly dependent on the degree of phenol loading. For a smaller amounts of activated carbon, the change of permeate concentration before break point and phenol loading with time were steeper than in the case of large amounts. Permeate concentration before break point decreased with decreasing particle size, this could be due to the increase of outer surface of particle and film mass transfer coefficient.

  • PDF

Characteristics of Heteropoly Acid Catalyst for the Synthesis of ETBE(Ethyl Tert-Butyl Ether) (ETBE(Ethyl Tert-Butyl Ether) 합성에 대한 헤테로폴리산 촉매의 특성)

  • Park, Nam-Cook;Shin, Jae-Soon;Seo, Seong-Gyu;Lim, Yeoung-Taek;Kim, Jae-Seung
    • Applied Chemistry for Engineering
    • /
    • v.5 no.1
    • /
    • pp.30-36
    • /
    • 1994
  • Reaction characteristics and correlations between the acidic property and catalytic activity of heteropoly acid catalyst on ETBE synthesis as a gasoline octane enhancer were investigated. The amount of pyridine adsorbed on heteropoly acid catalyst and catalytic activity in the synthesis of ETBE showed a good correlation. But ammonia failed to show such a correlation because of the complex formation of ammonia adsorbed and transition metal ions. In the case of supported catalyst catalytic activity and product distribution were mainly affected by the adsorption characteristics of TBA or iso-butene.

  • PDF

Adsorption and Recevery of Cu(II) and Zn(II) Ions by Algal Biomass (해조류를 이용한 Cu(II) 및 Zn(II) 이온의 흡착 및 회수)

  • Park, Kwang Ha;Jun, Bang Ook;Kim, Han Su;Kim, Young Ha
    • Analytical Science and Technology
    • /
    • v.9 no.4
    • /
    • pp.373-381
    • /
    • 1996
  • Algal biomass was used in our study in order to remove some metals. After packing of 40~60 mesh algae powder into column for use of metal adsorbent, the metal solution of 1mL/min of flow rate was eluted to adsorb in algae. More amount of Cu(II) or Zn(II) ion in green algae, Ulva pertusa Kjellman than in brown algae, Sargassum horneri (Turner) C. Agarch were adsorbed and Cu(II) ion was more adsorbed in both algae than Zn(II) ion. Recovery of metal from algae is showing higher in acidic or neutral than in alkalic conditions. Cu(II) ion is recovered relatively higher than Zn(II) ion in our system.

  • PDF

Removal Properties of Nickel and Copper ions by Activated Carbon and Carbon Nanotube (활성탄과 카본나노튜브를 이용한 수용액상의 니켈과 구리 제거 특성)

  • Jung, Yong-Jun
    • Journal of Wetlands Research
    • /
    • v.20 no.4
    • /
    • pp.410-416
    • /
    • 2018
  • This experiment was carried out with the purpose of testing nickel and copper adsorption abilities of multi wall carbon nanotube (MWCNT) and activated carbon. In the acidic condition, only MWCNT was effective for removing nickel and copper ion in the aqueous phase while activated carbon rarely remove them. The MWCNT and heavy metals adsorption reaction followed pseudo-first order kinetic. When the initial pH value was neutral (pH=7), nickel was rapidly removed by MWCNT and activated carbon in 4 hr (99.02 %, 80.30 %). Also, copper ion was rapidly removed by both adsorbents in 4 hr when the initial pH was 7 (100 %, 99.73 %). Increasing of adsorbent dosages affect the pH evolution and heavy metal ions removal (0 ~ 99%). Also, oxidation pretreatment enhanced the adsorption efficiency of MWCNT.

The Effects of Bark on Heavy Metal Adsorption I. The Effects of Pine and Oak Barks on Adsorption of $Fe^{++}$ and $Ni^{++}$ in Wastewater (수피(樹皮)에 의(依)한 중금속(重金屬) 흡착효과(吸着效果) I. 수피(樹皮)를 이용(利用)한 폐수(廢水)중 $Fe^{++}$$Ni^{++}$의 제거(除去) 효과(效果))

  • Kim, Kyung-Jig;Paik, Ki-Hyon
    • Korean Journal of Environmental Agriculture
    • /
    • v.5 no.1
    • /
    • pp.55-60
    • /
    • 1986
  • The objective of this study was to investigate the physical and chemical factors of Pinus densiflora SIEB. et ZUCC. and Quercus mongolica Fisher barks affecting on the adsorption of heavy metals. The results obtained can be summarized as follows: 1. With decreasing the particle size of bark, the adsorption rate of two heavy metal ions were increased. In case of using same particle size, the adsorption of $Fe^{++}$, and $Ni^{++}$ by Quercus bark showed higher than by Pinus bark. 2. The effect of untreated bark on the adsorption of heavy metal was more or less 5% higher than that of HCHO-treated bark in both species. But the color absorbances of the filtrates from HCHO-treated Pinus and Quercus barks were 5.8 and 11.8 times smaller than those of the filtrate from untreated Pinus and Quercus barks, respectively. 3. The maximum adsorption of $Fe^{++}$, and $Ni^{++}$ by bark was shown after 30 min. of the reaction. 4. With increasing the concentration of heavy metal, the amount of adsorption by bark was increased, but the adsorption ratio were decreased. 5. The maximum adsorption of $Fe^{++}$, and $Ni^{++}$ appeared at final pH of $4{\sim}5$, and pH of $3.6{\sim}4.0$ in filtrate, respectively. 6. With increasing the bark weight per a given heavy metal solution, the adsorption ratio were increased, but the amount of adsorption per gram of bark was the highest on the reaction with 2g of bark in a economical sense showing the amount of adsorption of 21mg $Fe^{++}$/g and 7mg $Ni^{++}$/g of Pinus bark, 36mg $Fe^{++}$/g and 9mg $Ni^{++}$/g of Quercus bark, respectively.

  • PDF

Sorption Characteristics of Heavy Metal Ions on Fly Ash. and Oyster Shell (플라이애쉬와 굴패각을 이용한 중금속 이온의 흡착특성에 관한 연구)

  • Kwon, Yong-Sam;Lee, Ki-Ho;Park, Jun-Boum
    • Proceedings of the Korean Geotechical Society Conference
    • /
    • 2003.03a
    • /
    • pp.629-634
    • /
    • 2003
  • 본 연구에서는 대표적인 산업부산물인 굴패각과 플라이애쉬를 활용한 흡착제를 개발하여 중금속 이온의 제거 기작을 평가하였다. 1차적으로 연구된 중금속 이온은 카드뮴, 납, 구리이며, 산업부산물을 활용하여 흡착특성을 평가하였고, 동시에 현장 적용성을 모사하기 위해 점성토와 화강풍화토에 대한 흡착실험도 함께 수행하여 각각의 흡착특성을 비교ㆍ평가하였다. 실험 결과를 등온흡착식으로 분석하여본 결과 굴패각의 경우 카드뮴, 납, 구리이온의 용액 내 제거율이 해성점토나 화강풍화토를 사용한 흡착제에 비해 우수하므로 흡착제로서의 사용 가능성을 확인할 수 있었다.

  • PDF

Development of Polymeric Adsorbents for the Treatment of Coloured Waste Waters and it's Application (I) - Carboxymethylated Cellulosic Adsorbent System - (유색폐수처리를 위한 고분자흡착제의 개발과 처리수의 재사용(I) - Carboxymethyl화 셀룰로오스흡착제 -)

  • Soo Min Park
    • Textile Coloration and Finishing
    • /
    • v.4 no.2
    • /
    • pp.84-88
    • /
    • 1992
  • 셀룰로오스 펄프에 폴리비닐알코올의 블랜드, 가교, 및 카복시메칠화한 아니온성 셀룰로오스계 고분자 흡착제에 대한 모델 카치온 염료, C.I. Basic Red 18의 흡착 및 탈색 성능을 수용액계(pH 4.2)에서 검토하였다. 아니온성 셀룰로오스 고분자 흡착제의 카치온 모델 염료의 흡착등온성은 저농도 영역에서 Sigmoidal 형을 나타내었고 Donnan 흡착 모델 기구로 해석하였다. 하전기 도입에 따라 염료의 흡착능은 증가하였으며 이 흡착능력은 Sodium이온의 첨가에 의하여 저하하였다. 또 아니온 셀룰로오스계 흡착제에 의한 모델 염료의 배수 탈색율은 크게 증가하였으며 입상활성탄보다 우수한 탈색능력을 나타내었다.

  • PDF

The adsorption characteristics of carbon dioxide by Impregnated Activated Carbon using potassium Hydroxide (KOH 첨착활성탄소의 $CO_2$ 흡착 특성)

  • 박영태;김정덕;손부순;임계규
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 2000.11a
    • /
    • pp.384-388
    • /
    • 2000
  • 일반적으로 흡착분리공정 기술개발은 대략 3단계의 과정을 거치게 되는데 흡착제의 선정, 흡착탑의 거동해석, 연속공정 구성 및 운전으로 이루어진다. 이중 흡착제의 선정은 대상 혼합물에 어떤 흡착제를 사용하여 효율적인 분리 결과를 얻을 수 있는가를 결정하는 기초단계이면서도 가장 중요한 과정이다. 이를 위해 여러 흡착제에 대한 흡착평형량과 이로부터 얻어지는 선택도, 흡착열, 그리고 흡착질과 흡착제 사이의 물질전달저항과 흡착제의 기공 분포도, 기공부피, 기공율, 비표면적, 충전 밀도(Bulk Density), 파쇄 강도 및 마모저항 등과 같은 물리적 특성을 종합적으로 비교 검토하여 흡착제를 선택하여야 한다. (중략)

  • PDF

Surface Complexation of Cationic Metal Adsorption Onto Amorphous Aluminum Oxide (무정형 알루미늄 산화물에 의한 양이온 중금속의 표면착화)

  • Park, Youn-Jong;Yang, Jae-Kyu;Choi, Sang-Il
    • Journal of Soil and Groundwater Environment
    • /
    • v.13 no.1
    • /
    • pp.101-109
    • /
    • 2008
  • The adsorption characteristics of cationic metals such as copper, cadmium, and lead onto the amorphous aluminum oxide, AMA-L, which was mineralized from raw sanding powder at $550^{\circ}C$ were investigated. Additionally, surface complexation reaction of cationic heavy metals onto AMA-L was simulated with MINEQL + software employing a diffuse layer model. From the batch adsorption tests in a single element system, the adsorption affinity of each metal ion onto AMA-L was following order: lead > copper > cadmium. In a binary system composed with copper and cadmium, quite a similar adsorption affinity was observed in each metal ion compared to the single element system. When the surface complexation constants obtained in the single system were used in the prediction of experimental adsorption results, model predictions were well fitted with experimental results of both single and binary systems.