• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.2
• /
• pp.114-117
• /
• 2004

Rates of $H_2$ uptake into $Pt/MoO_3$ were measured for the noncalcined and $200^{\circ}C$ calcined $Pt/MoO_3$. Amount of $H_2$ uptake for $200^\circ{C}$calcined $Pt/MoO_3$ was greater than the amount of noncalcined $Pt/MoO_3$. From these two experiments, it was found that the rates of $H_2$ desorption were proportional to the increase of desorption temperature. XPS demonstrated that Cl reduced more faster in ITR after calcination at $200^{\circ}C$. This inducd smaller amount of residual chlorine at adlineation sites between Pt and $MoO_3$ substrates. This resulted in opening the more channel of hydrogen pathway into more $MoO_3$particles and controled the kinetics of hydrogen uptake.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.2
• /
• pp.217-229
• /
• 2000

Adsorption equilibrium experiments for the phenol on granular activated carbon(16~25 mesh) and powder activated carbon(325 mesh) were carried out at $25{\pm}1^{\circ}C$ and the results were expressed with Freundlich isotherm. Adsorption rate experiments were executed in batch adsorption system under the condition that can be neglecting mass transfer resistance at the external surface of the particle. The results were analysed with the Miller's method to evaluate the linear driving force(LDF) adsorption rate constant. Fixed bed adsorption experiments were performed by adopting different flow rates in the activated carbon-phenol system at $25{\pm}1^{\circ}C$. The theoretical breakthrough curves were estimated with the simple constant pattern solution. The adsorption rate constant of LDF model was not a fixed value but variable with adsorption amount. The experimental results were better agreed with the estimation of breakthrough curve using the variable adsorption rate constant than the results estimated using the average fixed adsorption rate constant.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.7
• /
• pp.714-721
• /
• 2010

This research was undertaken to evaluate the feasibility of lanthanum hydroxide for fluoride removal from aqueous solutions. A batch sorption experiments were conducted to study the influence of various factors such as pH, contact time, initial fluoride concentration and temperature on the sorption of fluoride on lanthanum hydroxide. The optimum fluoride removal was observed in the $pH_{eq}{\leq}8.8$. Sorption equilibrium of fluoride on lanthanum hydroxide was better described by the Freundlish isotherm model than by the Langmuir isotherm model. The adsorption energy obtained from D-R model was 9.21 kJ/mol indicating an ion-exchange process as primary adsorption mechanism. The pseudo-second-order kinetic model described well the experimental kinetic data. Thermodynamic parameters such as ${\Delta}Go^{\circ}$, ${\Delta}H^{\circ}$ and ${\Delta}S^{\circ}$ indicated that the nature of fluoride sorption is spontaneous and endothermic. The used lanthanum hydroxide could be regenerated by washing with NaOH solution. Also, the results applied to real ground water indicate that fluoride selectivity and removal capacity of lanthanum hydroxide were superior to those of PA anion-exchange resin.

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.1
• /
• pp.32-39
• /
• 2000

To investigate the adsorption-desorption reaction of Cd by sewage sludge, the adsorption of Cd from $Cd(NO_3)_2$ solutions of concentrations ranging from 5 to $50{\mu}g\;Cd\;mL^{-1}$ by sewage sludge was examined for reaction periods up to 48 hours. The amount of Cd adsorbed as a function of time was measured. The adsorption between Cd in solution and the solid phase could be described by two stages. The initial adsorption of Cd was very rapid, that is, approximately 95% of the added Cd was removed from solution within the first 30 minutes. Further, the greater the concentration of Cd added, the greater was the amount of Cd adsorbed. After the rapid initial decrease of Cd, a slower decline in the Cd concentration resulted which followed first order reversible kinetics. The equilibrium concentrations for the reactions, as well as the time period for the equilibrium reactions were dependent on the initial Cd concentrations. If equilibrium is reached, the amount of Cd remaining in solution is greater when the amount adsorbed is higher, although the percentage of Cd in solution is constant relative to the initial concentration of Cd. Some of the adsorbed Cd was released back to solution since the concentration of Cd after 48 hours was higher than the equilibrium concentration of Cd. However, despite the increased amount of Cd measured, the overall net reaction was a significant adsorption of Cd from solution by sewage sludge.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.11
• /
• pp.941-946
• /
• 2009

Two types of synthetic zeolites, commercially used (Z-WK) and synthesized by coal fly ash (Z-C1), and raw coal fly ash(F-C1) were examined for its kinetics and adsorption capacities of cobalt. Experimental data are fitted with kinetic models, Lagergen $1^{st}$ and $2^{nd}$ order models, and four types of adsorption isotherm models, Langmuir, Freundlich, Redlich-Peterson, and Koble-Corrigan. Synthesized zeolite (Z-C1) which had 1.51 of Si/Al ratio was synthesized by raw coal fly ash from a thermal power plant. Adsorption capacities with three types of adsorbents, Z-WK, Z-C1, and F-C1, were in the order of Z-C1 (94.15 mg/g) > F-C1 (92.94 mg/g) > Z-WK (88.56mg/g). The adsorption kinetics of Z-WK and Z-C1 with cobalt could be accurately described by a pseudo-second-order rate equation. The adsorption isotherms of Z-WK and Z-C1 with cobalt were well fitted by the Langmuir and Redlich-Peterson equation. Z-C1 will be used to remove cobalt in water as a more efficient absorbent.

• Clean Technology
• /
• v.26 no.3
• /
• pp.186-195
• /
• 2020

The isothermal adsorption, dynamic, and thermodynamic parameters of Acid black (AB) and Quinoline yellow (QY) adsorption by activated carbon were investigated using the initial concentration, contact time, temperature, and pH of the dyes as adsorption parameters. The adsorption equilibrium data fits the Freundlich isothermal adsorption model, and the calculated Freundlich separation factor values found that activated carbon can effectively remove AB and QY. Comparing the kinetic data showed that the pseudo second order model was within 10% error in the adsorption process. The intraparticle diffusion equation results were divided into two straight lines. Since the slope of the intraparticle diffusion line was smaller than the slope of the boundary layer diffusion line, it was confirmed that intraparticle diffusion was the rate-controlling step. The thermodynamic experiments indicated that the activation energies of AB and QY were 19.87 kJ mol^-1 and 14.17 kJ mol^-1, which corresponded with the physical adsorption process (5 ~ 40 kJ mol^-1). The adsorption reaction was spontaneous because the free energy change in the adsorption of AB and QY by activated carbon was negative from 298 to 318 K. As the temperature increased, the free energy value decreased resulting in higher spontaneity. Adsorption of AB and QY by activated carbon showed the highest adsorption removal rate at pH 3 due to the effect of anions generated by dissociation. The adsorption mechanism was electrostatic attraction.

• Journal of the Korean Chemical Society
• /
• v.35 no.1
• /
• pp.16-23
• /
• 1991

Resins of polystyrene supported triethylenetetramine of linear and claw types have been prepared by the reaction of triethylenetetramine with chloromethylated polystyrene. The resin supported triethylenetetramines were principally characterized by infrared spectra. Kinetics of adsorption of transition metals on the resin have been investigated. This paper reports the results of the diffusion coefficients and entropies of activation. The rate determining step is a process of diffussion through the particle.

• Proceedings of the KAIS Fall Conference
• /
• 2004.11a
• /
• pp.277-279
• /
• 2004

$300^{\circ}C$ 소성 Pt/MoO3가 수소를 흡착후 탈착하는 속도를 측정하였다. 두가지 흡착 속도를 나타내는 Pt/MoO3 촉매에서 탈착량은 흡착량과 탈착 온도의 증가에 비례하는 것을 알 수 있었다. 또한 X-Ray Photoelectron Spectroscope(XPS) 결과로부터 Pt와 MoO3간의 활성점에 존재하는 Cl의 존재가 수소 이동 속도를 결정하는 것으로 판단되었다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1998.10a
• /
• pp.364-366
• /
• 1998

• Korean Journal of Mineralogy and Petrology
• /
• v.36 no.2
• /
• pp.107-115
• /
• 2023

Cobalt can be released into the natural environment as industrial waste from the alloying industry and as acid mine drainage, and it is also a radionuclide (⁶⁰Co) that constitutes high-level radioactive waste. Smectite is a mineral that can be useful for adsorption and isolation of this element. In this study, Cheto-type montmorillonite (Cheto-MM), which is the source clays of The Clay Mineral Society (CMS) and already well-characterized, was used. The effect of the adsorption site affected by the presence of interlayer water on the adsorption of cobalt before and after dehydration by heating was evaluated and the adsorption mechanism of cobalt on Cheto-MM was studied by applying adsorption kinetics and adsorption isotherm models. The results showed that the adsorption characteristics changed with dehydration and subsequent shrinkage, and cobalt was found to be adsorbed at the edge of Cheto-MM for about 38% and adsorbed at the interlayer site for about 62%, suggesting that the cobalt adsorption of Cheto-MM is significantly influenced by the interlayer. By applying the adsorption kinetic models, the cobalt adsorption kinetics of Cheto-MM is explained by a pseudo-second-order model, and the concentration-dependent adsorption was best described by the Langmuir isotherm adsorption model. This study provides basic knowledge on the adsorption characteristic of cobalt on montmorillonite with different adsorption sites and is expected to be useful in predicting the adsorption behavior of smectite in high-level radioactive waste disposal sites in the future.