• Journal of Power System Engineering
• /
• v.11 no.4
• /
• pp.5-11
• /
• 2007

본 연구는 SI기관 실린더 내의 유동장 변이 과정을 3차원 LDV 측정 기술을 사용하여 흡입과 압축과정 동안 정량적으로 분석하였다. 실험은 헤드에 각각 2개의 흡입밸브와 배기밸브를 갖는 기관이 모터링되는 공회전 상태에서 실시하였다. 지난 30년 동안 텀블과 스월은 실린더 내의 평균 유동 정량화에, 난류운동에너지는 난류 측정에 많이 사용되어 왔다. 그러나 텀블은 solid body 회전 유동을 비교하는데 적절하며, 서로 다른 유동 패턴 비교에는 부적절 하다는 것이 보고되고 있는 실정이다. 3차원 LDV시스템의 우수한 공간 분석 능력은 순간적인 유동장구조와 더불어 상대적으로 미세한 유동장의 구조 까지도 측정이 가능 하도록 하였다. 따라서 측정한 결과로부터 유동장의 난류운동에너지 등가면을 계산할 수 있었다. 본 실험 결과는 실린더 내의 난류 유동장 특성을 난류운동 에너지 등가면 정보를 이용하여 세심하게 관찰할 수 있음을 제시하고 있다.

• Journal of the korean Society of Automotive Engineers
• /
• v.15 no.2
• /
• pp.105-111
• /
• 1993

내연기관의 혼합 가스 생성 장치로 흡입되는 공기의 유량을 조절하기 위해 Butterfly 밸브가 사용 된다. 이 밸브는 유량의 제어에는 매우 유용한 반면, 밸브 후면에서의 복잡한 공기의 유동현상[6] 으로 인하여 혼합가스의 생성에 장해적인 요소를 제공하기도 한다. 특히 밸브가 많이 닫힌 상태 에서는 밸브와 관로벽 사이의 간격이 좁아지는 Throttling 현상으로 인하여, 엔진에 고 부하시 흡 입되는 공기의 양이 증가하게 되어, 밸브 주위에서 공기 속도의 급증으로 인하여 유동장의 압축 성 현상을 기대할 수 있다. Throttle의 Choking 현상으로 인하여 공기의 입자는 운동에너지를 잃 게 되고, 궁극적 혼합가스의 생성에 영향을 미쳐 엔진성능의 저하를 초래하게 된다. 본 연구에서 는 실제 엔진(Central Fuel Injection Engine, 5 liters) [1]의 흡인 manifold를 modelling하여, 특히 밸브가 많이 닫힌 상태에서, 밸브 주위에서의 난류 유동의 압축성 현상을 정량적으로 분석해 보았다.

• The KSFM Journal of Fluid Machinery
• /
• v.8 no.4 s.31
• /
• pp.61-65
• /
• 2005

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.7
• /
• pp.1087-1094
• /
• 2003

The piston slap phenomenon occurs when the piston collides with the internal wall of the cylinder. Impact force caused by piston slap is one of the major mechanical noise sources in reciprocating compressors. In response to public demand, strict regulations are increasingly being imposed on the allowable noise level which is caused mostly by household electric appliances. In this paper, forces acting on piston by considering the dynamic behavior of suction and discharge valves are analytically calculated and the piston slap caused by the piston secondary motion is investigated by the finite element method.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.9
• /
• pp.82-88
• /
• 1999

The object of this study is to find new evaluation index for in-cylinder flow chracteristics istead of current swirl, tumble coefficient using steady flow test rig on intake port system. To this end, port flow system. To this end, port flow rig test was conducted on DOHC head varying intake valve lift respectively. Finally combination angular coefficient and inclination angle were introduced as new evaluation index for in-cylinder angularflow characteristics instead of swirl and tumble coefficient.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.6
• /
• pp.880-885
• /
• 2000

Flow patterns and steady flow characteristics of an intake 3valve cylinder head are not obviously declared. Thus, in the study, the characteristics and limitation of intake flow coefficient which applied to multi intake valve engine are introduced. The flow coefficient and tumble characteristics are investigated by means of the steady flow test and flow visualization method. As the results, it is found that the intake flow rate is dominated by effective valve open area. In addition, this paper shows that the mass flow rate of intake 3valve engine is greater than that of intake 2valve engine and tumble flow of intake 3valve engine is superior to that of intake 2valve engine.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.768-770
• /
• 2014

A shaft of a reciprocating compressor receives bending force by piston, which makes movement of the shaft. The movement of the shaft affects durability and becomes a source of noise. In this paper, a cylinder is modeled by considering motion of a suction and discharge valve. The journal bearing is modeled by Bernoulli's equation. The trajectory of shaft which is considered cylinder and journal bearing can be calculated by finite element method. It will help a design of shaft to increase durability and reduce noise.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.05a
• /
• pp.134.2-134
• /
• 2002

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.8
• /
• pp.1009-1015
• /
• 2011

In this study, in the high expansion cycle was conduced by variable valve timing system composition to close intake valve late, and in the intake air reduction on the low compression was solved by supercharging pressure. In this wise, by constituting Diesel-Atkinson cycle, this study looked into a possibility of thermal efficiency improvement. As a result, there was improvement in thermal efficiency and output in a whole range of closing timing from ABDC $40^{\circ}$ to ABDC $80^{\circ}$. However, after ABDC $70^{\circ}$ of closing timing, the thermal efficiency increase was getting smaller. As the result of the study, the optimum intake valve closing timing was about ABDC $70^{\circ}$, high loading territory of engine was more effective than low loading territory, and engine operation in middle loading territory was stable. At this time, brake thermal efficiency was 12.5% higher than ordinary engine on average.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.668-670
• /
• 2012

본 논문에서는 시작엔진 제작에 앞서 CFD기법을 이용하여 디젤 엔진 흡기포트의 유동 특성을 분석하고자 하였다. 유동 해석 결과 높은 밸브리프트에서는 흡기포트 곡률 최적화로 인해 흡입 공기량이 극대화되었으며, 낮은 밸브리프트에서는 스월 Chamfer를 적용하여 스월유동이 강화된 것을 확인할 수 있었다.