• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.6
• /
• pp.50-58
• /
• 2020

When the concrete surface layer is damaged, The method of impregnating the concrete surface with a water repellent cannot secure the expected durability. Recently, various waterproofing and water-repellent materials were mixed into concrete or mortar to secure water repellency even inside cracks, but compressive strength was greatly reduced. In order to overcome the decrease in compressive strength, there has not yet been a study using the merits of organic and inorganic materials at the same time, so in this study, the physical properties and water repellency performance were evaluated by mixing an organic/inorganic composite water repellent appropriately mixed with an organic and inorganic material into the mortar. When mixed with organic/inorganic water repellent, the flow and air content were reduced by about 10% and 50% compared to the Liquid specimen. In the case of the P6L1 specimen, it was confirmed that the compressive strength decreased by about 3.5% compared to the non-mixed mortar at 39.5 MPa, the same as the existing water repellent, Powder. Water-repellent performance The organic-inorganic composite water repellent mixture specimen confirmed higher water repellency than the existing water repellent mixture powder, and the chloride penetration resistance evaluation result showed that the organic-inorganic composite water repellent mixture specimen reduced the passing charge by about 45% compared to the non-mixed mortar. In summary, it is judged that the P5L1 organic/inorganic composite water repellent mixed with a powder water repellent and a liquid water repellent in a ratio of 5:1 is the most reasonable to prevent the decrease in compressive strength and secure water repellency.

• Journal of Radiation Protection and Research
• /
• v.3 no.1
• /
• pp.23-28
• /
• 1978

In order to investigate corelation between contents of dioctylphthalate in polyvinylchloride blent dibutyl tin dilaulate with dibutyl tin maleate as stabilizer and the behaviors of radiation resistance as well as electrical conductivity on irradiated specimens, several observations were carried out. A characteristic peak observed in the range of $1,540-1,640cm^{-1}$ on infrared spectra shows such a sensitive response to radiation as the intensity decreases with increasing doses and that this tendency strongly depressed in the presence of plasticizer. It is seemingly attributed for origin of the peak to the existence of RCOO- ion resulting from dissociation of stabilizere, further the depressive effect of decreasing peak intensity influenced by radiation seems to be caused by resonance absorption in benzen ring being a consistituent of plasticizer. It is also suggestive to be use the peak behavior influenced by radiation as a criterion for the evaluation of radiation resistance of PVC. Further the results obtained from electrical conductivity measurement also exhibit reasonable characteristics explainable with views used for the interpretation of the peak behavior mentioned previousely.

• Horticultural Science & Technology
• /
• v.31 no.1
• /
• pp.117-122
• /
• 2013

This research was carried out to clarify the germination characteristics with reference to hard seed coat in safflower. Morphologically, seed coat surface has hilum and micropyle which were evident during seed development stage. In the flower of developing seeds, the hilum area is connected with placenta of maternal tissue while the micropyle area is connected with the style of pistil. When the seeds imbibed, the hilum surface began to crack and the embryo protrudes through the hilum. To investigate the route for moisture absorption and gas exchange on the seed coat, the hilum and the micropyle were artificially sealed by paraffin. The seeds whose hilum were sealed could not germinate, which indicates that the exchange of moisture and oxygen takes place through hilum in safflower seeds. The germination was tested at $15^{\circ}C$, $20^{\circ}C$, and $25^{\circ}C$ by three substrates with different moisture conditions; top of paper method (hilum submerged in water), between-paper method, and soil seeding. The germination percentages were 31.3% at $15^{\circ}C$, 15.7% at $20^{\circ}C$ and 6.0% at $25^{\circ}C$ in the top of paper method; and 45.5% at $15^{\circ}C$, 30.0% at $20^{\circ}C$ and 14.0% at $25^{\circ}C$ in the between-paper method; and 80.0% at $15^{\circ}C$, 77.0% at $20^{\circ}C$ and 78.0% at $25^{\circ}C$ in the soil seeding, respectively. When the internal structure of hilum was investigated through SEM, it was found out consisting of vascular bundle element. In conclusion, the hilum of safflower seed was closely related with water absorption and gas exchange during initial germination process.

• Magazine of the Korea Concrete Institute
• /
• v.10 no.1
• /
• pp.125-132
• /
• 1998

경량골재 콘크리트의 내구성과 경제성에 대한 인식 부족으로 조경재료나 인공토양 둥 구조부재 이외의 분야에 사용되고 있는 국내 실정에 비해서, 구미 여러나라에서는 고강도 경량골재를 장지간 교량과 고충건물에 사용하고 있다. 경량골재 콘크리트는 구조물의 재료비 단순비교에 있어서도 경제성이 있을 뿐만 아니라, 자중감소로 인한 구조적, 기하학적 장점도 있으며, 또한 고강도 경량골재의 개발로 경량골재가 가지고 있는 여러 문제점을 해소하여 사용성과 내구성에 있어서 보통골재 콘크리트와 큰 차이가 없는 상황이다. 그러나국내에서 생산된 경량골재는 닫힌 공극보다 열린 공극을 많이 내포하고 있어 수분흡수가 많고, 특히, 동결융해에 대한 내구성에 취약한 문제점을 가지고 있다. 본 논문에서는 내동해성 향상을 위해 10종류의 고강도 경량골재 콘크리트 공시체를 제작하여 실리카 흄, 물.시멘트비, AE제, 강섬유 등을 실험 변수로 하여동결융해 실험을 수행하였다. 연구결과 실리카흄, 물.시멘트 비는 어느 정도 내동해성을 향상시키지만 근본적인 해결방안이 되지 못하며, AE제를 첨가한 공시체와 강섬유를 사용한 공시체는 동결융해 내구성 지수가 90%이상으로 측정되어 내동해성을 개선시킬 수 있는 요소로 나타났다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.4
• /
• pp.401-409
• /
• 2012

Ultrasonic testing are far superior to other nondestructive tests for detecting the disbond interface which occurred in adhesive interface. However, a solid rocket motor consisting of a steel case, rubber insulation, liner, and propellant poses many difficulties for analyzing ultrasonic waves because of the superposition of reflected waves and large differences in acoustic impedance of various materials. Therefore, ultrasonic tests for detecting the disbond interface in solid rocket motor have been applied in very limited areas between the steel case and rubber insulation using an automatic C-scan system. The existing ultrasonic test cannot detect the disbond interface between the liner and propellant of a solid rocket motor because most of the ultrasonic waves are absorbed in the rubber material which has low acoustic impedance. This problem could be overcome by analyzing the resonance frequency from the frequency spectrum using the ultrasonic resonance method. In this paper, a new technique to detect the disbond interface between the liner and propellant using ultrasonic resonance characteristics is discussed in detail.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.7
• /
• pp.601-605
• /
• 2014

Porous conductors are known to demonstrate excellent electrical, mechanical, and chemical resistance. These porous conductors demonstrated potential applications in various fields such as electrodes for supercapacitors, flexible heaters, catalytic electrodes, and sorbents. In this study, we described a pressure sensitive device using conductive and porous sponges. With an extremely simple "dipping and drying" process using a single-walled carbon nanotube (SWCNT) solution, we produced conductive sponges with sheet resistance of < $30k{\Omega}/sq$. These carbon nanotube sponges can be deformed into any shape elastically and repeatedly compressed to large strains without collapse. The pressure sensors developed from these sponges demonstrated high resistance change under pressure of up to a half of their initial resistance.

• Journal of Korean Ophthalmic Optics Society
• /
• v.8 no.1
• /
• pp.17-22
• /
• 2003

The experimental FT-IR spectra and DTA curves of the $PbO-Bi_2O_3-B_2O_3-SiO_2$ glasses have been investigated. The composition ratio dependence of glass transition temperature showed that the structure of this glass system changes at 60 mol% $Bi_2O_3$. We have observed that the FT-IR spectra of the investigated samples with high bismuth content are dominated by bands associated to the structural units of the heaviest cation, $Bi^{3+}$ and the boron atoms in the treated samples are three and four coordinated even for very high $Bi_2O_3$ content. The low intensity of these non-bridging oxygen bands, for high PbO content glasses, can be attributed to the strong network-forming roles of PbO. The glasses absorption bands exhibited a greater change in intensities on crystallization.

• Journal of the Korean Chemical Society
• /
• v.35 no.4
• /
• pp.368-373
• /
• 1991

Palladium(II) complexes of the type Pd(IEAA-NR)$_2$ (R = H, CH$_3$, C$_2$H$_5$, n-C$_3$H$_7$, n-C$_4$H$_9$, or CH$_2$C$_6$H$_5$), where IEAA-NR represents N-alkyl derivative of isonitrosoethylacetoacetate (H-IEAA) imine, have been prepared. And the structure of the complexes have been studied by elemental analyses, electronic, infrared, $^1$H and $^{13}$C-NMR spectra. It is proposed that both of IEAA-NR ligands coordinate to metal through nitrogens of imine and isonitroso groups to form 5-membered chelate rings in the complexes.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.20 no.2
• /
• pp.253-264
• /
• 1990

The purpose of this study was to estimate the distribution of absorbed doses of each important organs of head and neck region in panoramic radiography. Radiation dosimetry at internal anatomic sites and skin surfaces of phantom (RT-210 Humanoid Head & Neck Section/sup R/) was performed with lithium fluoride (TLD-100/sup R/) thermoluminescent dosimeters according to change of kilovoltage (65kVp, 75kVp and 85kVp) with 4 miliamperage and 20 second exposure time. The results obtained were as follows; Radiation absorbed doses of internal anatomic sites were presented the highest doses of 1.04 mGy, 1.065 mGy and 2.09 mGy in nasopharynx, relatively high doses of 0.525 mGy, 0.59 mGy and 1.108 mGy in deep lobe of parotid gland, 0.481 mGy, 0.68 mGy and 1.191 mGy in submandibular gland. But there were comparatively low doses of 0.172 mGy and 0.128 mGy in eyes and thyroid gland that absorbed dose was estimated at 85kVp. Radiation absorbed doses of skin surfaces were presented the highest doses of 1. 263 mGy, 1.538 mGy and 2.952 mGy in back side of first cervical vertebra and relatively high doses of 0.267 mGy, 0.401 mGy and 0.481 mGy in parotid gland. But there were comparatively low doses of 0.057 mGy, 0.068 mGy and 0.081 mGy in philtrum and 0.059 mGy in middle portion of chin that absorbed dose was estimated at 85kVp. According to increase of kilovoltage, the radiation absorbed doses were increased 1.1 times when kilovolt age changes from 65kVp to 75kVp and 1.9 times when kilovolt age changes from 75kVp to 85kVp at internal anatomic sites. According to increase of kilovoltage, the radiation absorbed doses were increased 1.3 times when kilovolt age changes from 65kVp to 75kVp and 1.6 times when kilovoltage changes from 75kVp to 85kVp at skin surfaces.

• The Korean Journal of Malacology
• /
• v.9 no.1
• /
• pp.1-16
• /
• 1993

한국의 담수에 광범위하게 서식하고 있으면서 역학적으로 중요한 역할을 하고 있는 두 종의 복족류 즉 쇠우렁이(Parafossarulus manchouricus)와 물달팽이(Radix auricularia coreana)의 소화기관 중에서 식도, 소화선 및 장에 대한 미세구조 관찰을 시도하였다. 이 부위들은 간흡충(간디스토마)과간질(소간디스토마)의 유생들이 그들의 생활사 중 거쳐가는 곳으로 알려진 소화관들이어서 이후 흡충류의 유충들이 위의 소화관에 주는 영향을 연구하는데 필요한 기초자료를 얻고자 수행된 것이었다. 관찰해 본 결과 다음과 같은 결론을 얻을 수 있었다. 식도의 상피조직은 두 종류에서 공히 원주세포와 원주섬모세포 및 점액분비 세포로 이루어져 있었다. 식도강상피 내에서도 어느 정도의 흡수와 소화가 이루어 지고 있음은 특이한 현상이라 하겠다. 소화선은 두 종에서 공히 복분지 관상선으로서 그 상피는 micovilli를 선강 또는 도관에 연한 유리표면에 가지고 있어 brush boredr을 이루고 있는 원주세포과 원주섬모세포로 구성되어 있었다. 이들 세포들의 내부 구조로 보아 소화세포와 배석세포로 구분할 수 있었다. 장의 상피는 원주세포와 원주섬모세포로 구성되어 있었으며 이들도 장강에 연한 유리표면에는 brush border를 이루고 있었다. 흡수와 분비기능이 활발한 것으로 사료된다. 전반적으로 보아 본 연구에서 관찰한 두 복족류의 소화관은 모든 부위에서 세포의 유리표면에 microvilli를 가지고 있어 물질의 흡수기능을 가지고 있음을 시사해주고 있었고, 이들 세포 중에는 때로 밀집한 cilia를 가지고 있어 소화관 내의 액체물질이나 이에 내포된 미세입자들의 유동을 도와주고 있음을 추측할 수 있었다.)은 결합조직으로 이루어진 근육질의 두꺼운 벽을 가지고 있었으며 내강은 돌출부위에 의해 4부분으로 갈라져 있었다. 내강에 연한 상피는 원주세포로 되어 있었다. 상음경(epiphallus)의 벽은 근섬유 다발은 벽의 외곽으로 갈수록 밀도가 높아졌다. 상부에 내강과 연결되는 함입구조(groove)를 가지며, 내강에 연한 상피는 섬모가 없는 원주세포로 이루어져 있었다. 음경(penis)은 근섬유가 산재된 두꺼운 벽을 가졌으며 상음경보다 굵은 원통형이었다. 내강은 많은 돌출부에 의해 복잡하게 나뉘어 있으며 상피세포는 원주 세포로 이루어져 있었고 섬모는 관찰되지 않았다. 내강 내의 분비물과 세포의 형태로 보아 내강상피세포는 분비기능을 가진 것으로 사료된다.술적 문제가 적절히 해결되는 경우 비활성 가스 제너레이터는 민수용으로는 대형 빌딩, 산림, 유조선 등의 화재에 매우 적절히 사용되어 질 수 있을 뿐 아니라 군사적으로도 군사작전 중 및 공군 기지의 화재 그리고 지하벙커에 설치되어 있는 고급 첨단 군사 장비 등의 화재 뿐 아니라 대간첩작전 등에 효과적으로 활용될 수 있을 것으로 판단된다.가 작으며, 본 연소관에 충전된 RDX/AP계 추진제의 경우 추진제의 습기투과에 의한 추진제 물성 변화는 미미한 것으로 나타났다.의 향상으로, 음성개선에 효과적이라고 사료되었으며, 이 방법이 편측 성대마비 환자의 효과적인 음성개선의 치료방법의 하나로 응용될 수 있으리라 생각된다..7%), 혈액투석, 식도부분절제술 및 위루술·위회장문합술을 시행한 경우가 각 1례(2.9%)씩이었다. 13) 심각한 합병증은 9례(26.5%)에서 보였는데 그중 식도협착증이 6례(17.6%), 급성신부전증 1례(2.9%), 종격동기흉과 폐염이 병발한 경우와 폐염이 각