• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.12
• /
• pp.1965-1970
• /
• 2009

This study examined the effect of surfactant pretreatment on the pectinase-treated cotton/chitosan blends by weight loss and properties such as water absorbency, dyeability, tensile strength, pilling property, and surface morphology. The weight loss of cotton/chitosan blends was 1.5% by the surfactant pretreatment/pectinase treatment. The water absorbency and dyeability of samples showed a significant improvement by the surfactant pretreatment/pectinase treatment. The tensile strength and pilling property of treated fabrics showed no change. The water absorbency and dyeability of pectinase treated samples improved with the pretreatment of the surfactant without damaging the fibers.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.3
• /
• pp.57-64
• /
• 1996

제지공장에서 사용하는 습윤제는 물의 표면장력을 낮춤으로써 목재섬유가 물을 빨리 흡수하여 팽윤하도록 도와준다. 목재섬유가 물을 흡수하여 팽윤하는 과정을 밝히지 위한 연구가 많이 진행되어 왔지만 목재섬유와 물의 상호작용을 상세히 연속적으로 측정할 방법이 전에는 별로 없었다. 목재섬유가 팽윤할 때 발생하는 팽윤압력은 음향방사를 동반하기 때문에 이를 측정하여 팽윤과정을 알아내는 기술이 개발되었다. 본 연구에서는 이 방법을 이용하여 목재를 여러 농도의 습윤제에 담갔을 때 발생하는 음향방사와 중량증가를 측정하여 이 두 변량의 상관을 조사하고 이 방법이 목재의 습윤과정 연구에 유용하게 사용될 수 있는지를 조사하였다. 아까시나무와 라디에타 파인의 두 수종을 사용하였는데 두 수종의 흡수 형태는 매우 달랐다. 5분 동안 용액에 침지하였을 때 후자가 전자보다 10배 정도 더 많이 중량증가하였으며, 발생한 음향방사도 후자가 전자보다 훨씬 많았다. 아까시나무의 중량증가와 음향방사는 습윤제 농도에 거의 무관하였으나 라디에타 파인의 음향방사는 습윤제 농도의 증가에 따라 증가하였으며 라디에타 파인의 중량증가는 습윤제의 표면장력 변화와 일치하였다. 수종별 중량증가와 음향방사의 관계는 아까시나무가 음의 상관을 나타냈으나 라디에타 파인은 양의 상관을 나타내었다. 자비처리 시편은 무처리 시편보다 음향방사가 적었다.

• Clinics in Shoulder and Elbow
• /
• v.10 no.1
• /
• pp.73-77
• /
• 2007

Purpose: This study reports the clinical results of the arthroscopic repair of type II SLAP lesion with bio-knotless anchor. Materials and Methods: 25 cases of 25 patients (20 male, 5 female) were included in this study. The average age was 44.5 years old. Preoperative ASES score was average 44. Arthroscopic SLAP repair with 1 or 2 bio-knotless anchors were performed in all cases. The average follow up period was 15 months. Results: The ASES score improved to average 92.7 at last follow up period and 23 cases had full range of motion of the shoulder. 2 case had mild limited range of motion of the shoulder without any problem in normal activity. Conclusion: Arthroscopic repair with bio-knotless anchor in type II SLAP lesion is one of the good methods because of the good clinical results.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1985.10a
• /
• pp.8-8
• /
• 1985

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1985.05a
• /
• pp.14-14
• /
• 1985

• Proceedings of the KIEE Conference
• /
• 1987.07a
• /
• pp.356-357
• /
• 1987

• Journal of the Korean Solar Energy Society
• /
• v.30 no.4
• /
• pp.36-42
• /
• 2010

본 논문은 태양열이용 냉난방시스템 중에서 실제로 액체흡수제를 재생하는 재생탑 내의 충진층에 있어서의 열 및 물질전달의 실험치와 이론적 해석에 의한 결과치와의 비교를 나타내고 있다.특히 물질전달의 극대화를 위하여 충진층 내에서 공기와 흡수제의 접촉면적을 크게 할 필요가 있는데,이를 위해서 본 실험에서는 직경이 3cm인 플라스틱제 충진재를 사용하였으며, 흡수제로는 저농도의 염화리튬 수용액이 사용 되었다. 충진층 내에서의 최적 높이를 예측하기 위하여 해석의 모델인 실험장치를 직접 제작하여 실험을 수행하였고, 이론 해석에 있어서 체적 열전달을 고려한 정상상태를 모델화하여 해석하였다. 이 결과, 충진층 내에서 실험치와 이론적인 계산치가 잘 일치함을 알 수 있었으며, 충진층의 높이가 2m 이상인 경우에는 높이에 따른 재생량의 차이가 없어서 없음을 알 수 있었다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.2
• /
• pp.111-121
• /
• 2010

Purpose: This 3D-FEA study was performed to investigate the influence of marginal bone loss pattern around the implant to the stress distribution. Material and methods: From the right second premolar to the right second molar of the mandible was modeled according to the CT data of a dentate patient. Teeth were removed and an implant ($\Phi\;4.0{\times}10.0mm$) was placed in the first molar area. Twelve bone models were created; Studied bone loss conditions were horizontal bone loss and vertical bone loss, assumed bone loss patterns during biologic width formation, and pathologic vertical bone loss with or without cortification. Axial, buccolingual, and oblique force was applied independently to the center of the implant crown. The Maximum von Mises stress value and stress contour was observed and von Mises stresses at the measuring points were recorded. Results: The stress distribution patterns were similar in the non-resorption and horizontal resorption models, but differed from those in the vertical resorption models. Models assuming biologic width formation showed altered stress distribution, and weak bone to implant at the implant neck area seams accelerates stress generation. In case of vertical bone resorption, contact of cortical bone to the implant may positively affect the stress distribution.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.12
• /
• pp.25-29
• /
• 1972

This experiment was carried out to investigate the role of Silicon accumlated in rice plant under different conditions of light and humidity, using radioisotopes Ca-45, Mn-54, and P-32. This results obtained in are as follows; 1. Light effect is more severe in phosphate uptake by rice plant than is calcium. Amounts of phosphate uptake in light condition is six times more than in dark conditions, while that of calcium is double. 2. Change of relative humidity affects calcium absorption and transport from root to shoot. It seems not to be influenced in phosphate and manganese uptake by relative humidity. 3. More uptake of each element Ca-45, P-32, or Mn-54 was found in the rice plant applied with silicic acid. It is considered that there must be some relationship between silicon content and ion uptake in rice plant. 4. The transport ratio of nutrient from root to shoot shows a specific pattern that calcium is approximately 1.0 manganese 0.5 and phosphate 0.2 respectively.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.3 s.47
• /
• pp.361-367
• /
• 2004

In this study, a different UV (ultra-violet) ray absorption system is presented in which butyl methoxydiben-zoylmethane (BMDM, a model UV-A absorbent, 320$\~$400 nm) is stabilized in phase-controlled poly(methyl methacrylate) (PMMA) microspheres. The photochemistry of BMDM in the microspheres was investigated considering its phase characteristics therein. The analysis of a differential scanning calorimeter and X-ray diffractometer showed that the BMDM in the microspheres was present with a non-crystalline state. The phase control of BMDM in the polymer microsphere has an excellent ability to protect UV-A with maintaining its photo- and thermal stability. The results obtained in this study illustrate well that the phase control of the UV absorbents in the polymer microspheres is another key factor that de-termines its photochemistry and photostability in the final formulations.