• Korean Journal of Materials Research
• /
• v.8 no.8
• /
• pp.737-743
• /
• 1998

The synthesis of $SrAI_2O_4:Eu^{2+}$ phosphor and its properties of both photoluminescence and long-phosphorescent were investigated as a function of sintering condition. Single phase of $SrAl_2O_4$ was obtained by sintering the mixtures of $SrCO_3$, $Eu_2O_3$, $AI_2O_34 and 3wt% $B_2O_3$ powders over 100$0^{\circ}C$ in Ar/H2 atmosphere. The optimum sintering condition for the long-phosphorescent phosphor of $SrAI_2O_4:Eu^{2+}$ was found at 130$0^{\circ}C$ for 3hours. The PL emission spectrum of $SrAI_2O_4:Eu^{2+}$ shows a maximum peak intensity at 520nm(2.384eV) with a broad emission extending from 450 to 650nm which resulted from the $4f^65d^1$$\rightarrow$$4f^7$ transition of $Eu^{+2}$ under 360nm exitation. Monitored at 520nm. the excita¬tion spectrum of $SrAI_2O_4:Eu^{2+}$ exhibits a maximum peak intensity at 360nm (3.44eV) with a broad absorption band extending from 250 to 480nm.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.157-157
• /
• 2003

수평 전기로에서 CdIn2Te4 다결정을 용융법으로 합성하고 Bridgman법으로 tetragonal structure의 c축에 평행한 CdIn2Te4 단결정을 성장시켰다. c축에 평행한 시료의 광흡수와 광전류 spectra를 293K에서 10K까지 측정하였다. 광흡수 spectra에 의해 band gap Eg(T)는 varshni공식에 따라 계산한 결과 1.4753eV-(7.78$\times$$10^{-3}$eV/K)T$^2$/(T+2155K)임을 확인하였다. Hall 효과는 van der Pauw 방법에 의해 측정되었으며, 온도에 의존하는 운반자 농도와 이동도는 293K에서 각각 9.01$\times$$10^{16}$ /㎤, 219 $\textrm{cm}^2$/V.S였다. 광전류 스펙트럼으로부터 Hamilton matrix(Hopfield quasicubic mode)법으로 계산한 결과 crystal field splitting $\Delta$cr값이 0.2704 eV이며 spin-orbit $\Delta$so 값은 0,1465 eV임을 확인하였다. 10K일 때 광전류 봉우리들은 n=1일때 Al-, Bl-와 Cl-exciton 봉우리임을 알았다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.57-60
• /
• 1998

Poly(3-hexylthiophene)(P3HT) was synthesized by use of FeCl$_3$ as a oxidizing agent at $25^{\circ}C$. The infrared spectrum of our polymer gave good evidence for the conjugation of 3-hexylthiophene monomer unit. P3HT contains the HT(head-to-tail) linkage larger than 64% based on NMR analysis. Electronic absorption and photoluminescence studies show that cast films of P3HT have three exciting state. Absorption spectrum was separated with three maximum peaks by Giese-French method and shifted to the shorter wavelength with increasing temperature. Separated absorption spectrum of P3HT is well adapted to PL peak appeared at longer wavelength. Low temperature PL spectrum is well separated at 669nm, 733nm and 812nm.

• Journal of the Korean Chemical Society
• /
• v.25 no.4
• /
• pp.263-269
• /
• 1981

The substituted pyridinium salts of oxochloromolybdates(V) have been prepared characterized by visible and infrared spectra, and magnetic moments. The electrical conductance of aqueous solutions of substituted pyridinium salts have been measured over a range of concentrations. The results indicate that the complex anions are monomeric in the solid. The magnetic moments of the complexes are similar to the spin-only values. Substituted pyridines are present as pyridinium cation in solid state.

• Korean Journal of Crystallography
• /
• v.10 no.1
• /
• pp.76-82
• /
• 1999

융액인상법에 의하여 Garnet 구조내 결정학적 8면체 및 4면체의 양이온 자리에 전하 보상이온 Mg2+, 구조 수식이온 Sc3+ 및 laser 활성이온 Cr4+을 다양한 농도로 주입한 융액으로부터 Cr4+:YAG 단결정을 성장하고, 주입된 불순이온이 흡수계수에 미치는 영향을 규명하였다. 양질의 단결정을 성장하기 위한 인상속도와 회전속도는 각각 1.5 mm/h와 10 rmp이었으며, Cr4+:YAG 단결정은 <111> 방위로 성장하였다. 성장된 결정의 결정구조 동정 및 결정격자 상수를 측정하고, 1.064 ㎛에서의 결정화분율에 따른 흡수계수, 형광방출 스펙트럼, 유효편석계수(keff)를 보고하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.05b
• /
• pp.131-134
• /
• 2000

Electroluminescent[EL] from conjugated polymers has recently received great attention because polymer light-emitting diodes[LEDs] clearly have potential for applications such as large-area displays. The operation of polymer LEDs is based on double injection of electrons and holes from the electrodes, followed by formation of excitons whose radiative decay results in light emission at wavelength characteristic to the material In this paper, we fabricated the single layer EL device using poly(3-octylthiophene)[P3OT] as emitting material. The orange-red light was clearly visible in a dark room Maximum peak wavelength of EL spectrum saw at 640nm in accordance with photon energy 1.9eV. And we know that ionization energy of P3OT is 4.7eV from the cyclic voltammetry.

• Polymer(Korea)
• /
• v.24 no.1
• /
• pp.65-71
• /
• 2000

The latent properties and cure kinetics of an acid anhydride-cured epoxy resin have been investigated by a near-infrared (NIR) reflection spectroscopy. The assignments of the latent properties and cure behaviors were performed by the measurements of the NIR reflectance for epoxide and hydroxyl groups at different temperatures. A comprehensive analysis of the origin, location, and shifts during reaction of all major NIR absorption peaks in the spectral range from 4000 to 7100 $cm^{-1}$ / was provided. The extent of reaction was determined from NIR absorption band at the 4530 $cm^{-1}$ / depending on epoxide concentration and cure temperature.

• Journal of the Korean Ceramic Society
• /
• v.14 no.4
• /
• pp.226-229
• /
• 1977

The infrared absorption spectrum of Synthesized magnesite is shown in the wve number region 2510 and 745cm-1. By using Wilson's GF matrices the force constants' of the Urey-Bradley force field were deterined from the infrared absorption frequencies. For magnesite the stretching force constant K=5.41, the bending force constant H=0.46, the repulsive force constant F=1.97, and the force constant for the out-of-plane vibration fθ=0.65md/Å. For calcite they are K=5.51, H=0.38, F=1.88 and fθ=0.64md/Å.

• Bulletin of the Korea Photovoltaic Society
• /
• v.2 no.2
• /
• pp.21-28
• /
• 2016

3족과 5족 물질로 구성된 III-V 고효율 화합물 태양전지는 태양광 스펙트럼에 대한 많은 파장영역대의 빛을 흡수할 수 있는 장점을 갖고 있어 지구상에서 만든 태양전지 중 가장 효율이 높다. 그러나, III-V 화합물 물질은 실리콘 보다 고가의 비용이 들므로 이를 극복하기 위해서 집광렌즈 및 빛을 추적하기 위한 추적기 등 집광시스템으로 구성되어야 한다. 본고에서는 고효율의 III-V 화합물 태양전지의 현재 기술개발동향 및 고효율 저가화를 위한 방안으로 기판재활용 기술, 태양광 태양열 복합활용 시스템 및 소형집광모듈 등을 소개하고자 한다.

• Journal of the Korean Society for Railway
• /
• v.6 no.4
• /
• pp.30-36
• /
• 2003

궤도(track)는 열차가 안전하고 승차감(乘車感)이 좋게 운행되도록 충분한 강도를 가지고 더욱이 양호한 상태로 정비되어 있어야 한다. 일반적으로, 토목구조물(structure)은 하중을 받으면 변위(變位)ㆍ변형하고, 하중이 없게 되면 원래대로 되돌아간다. 즉, 각 부재는 탄성 한계 내로 응력(應力)이 들어가도록 설계된다. 그러나, 궤도는 열차의 하중과 진동을 궤도 자신의 변위 축적으로 흡수하고 있다. 결국, 처음부터 틀림이 진행되어 가는 것을 전제로 한 유일한 구조물이다. 일반적으로는 스프링 하 중량과 축중(軸重)이 큰 차량이 빠르고 대량으로 주행하게 되면 궤도 틀림이 발생하여 진행한다. 궤도 틀림 파형의 성장은 궤도 틀림이라고 하는 공간적인 파형의 시간적인 추이라고 하는 2차원적인 취급이 필요하다. (중략)