• 오토저널
• /
• 제6권1호
• /
• pp.1-10
• /
• 1984

1982년 8월에 Toyota가 전자제어시스템을 갖춘 새로운 디이젤기관을 선보였다. 이 제어시스템 들은 연료의 분사량, 분사시간, 아이들링속도, 글로우 플러그(glow plug)전류 및 흡기량의 최적 제어를 할 수 있도록 하였다. 이로써 높은 기관성능, 즉 훌륭한 연료절약효과와 양호한 운전성 능에 기관의 소음이나 진동의 저감 등에 큰 이점들을 얻을 수 있게 된다.

• 한국자동차공학회논문집
• /
• 제18권5호
• /
• pp.62-67
• /
• 2010

Exhausting fossil fuel and increasing concern of air pollution have brought on the change of the focus of developing new vehicles from performance to fuel economy and emission. The gasoline engines adopting the naturally aspirated way use the throttle-body for engine load control. Therefore, its pumping loss increases more than that of the diesel engine, and also mostly operating in a partial load condition has bad influence on fuel economy and emission. In these days, the continuous variable valve timing system and variable induction system are adopted in order to improve fuel consumption and emission. In this study, we optimize the runner length and operate region of variable induction system to simulataneously improve the performance, fuel economy, and emission of gasoline engine with employing GT-Power as a CAE tool for engine analysis and PIAnO as PIDO tool for process integration and design optimization.

• 한국산학기술학회논문지
• /
• 제14권6호
• /
• pp.2575-2580
• /
• 2013

본 논문에서는 RE엔진에 적용하기위한 흡기포트를 CFD 기술을 활용하여 개발하였다. 3차원 모델링을 진행하고 전산유체해석을 진행하였으며, 계산된 유량계수와 스월계수를 실험결과와 비교 분석하였다. 흡기포트의 convex 및 concave부 곡률을 최적화하여 Recirculation의 발생과 유동저항을 저감하였다. 결과적으로, 계산된 평균 유량계수는 0.383이고, 평균 스월수는 1.544로 일반적인 2밸브 엔진 시스템의 평균성능에 상회하는 우수한 성능을 나타내었다.

• 대한기계학회논문집B
• /
• 제20권6호
• /
• pp.1921-1930
• /
• 1996

To design an optimum engine intake system, a flow model for the intake manifold was developed by the finite difference method. The flow in the intake manifold was one-dimensional, and the finite difference equations were derived from governing equations of flow, continuity, momentum and energy. The thermodynamic properties of the cylinder were found by the first law of thermodynamics, and the boundary conditions were formulated using steady flow model. By comparing the calculated results with experimental data, the appropriate boundary conditions and convergence limits for the flow model were established. From this model, the optimum manifold lengths at different engine operating conditions were investigated. The optimum manifold length became shorter when the engine speeds were increased. The effect of intake valve timings on inlet air mass was also studied by this model. Advancing intake valve opening decreased inlet air mass slightly, and the optimum intake valve closing was found. The difference in inlet air mass between cylinders was very small in this engine.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권8호
• /
• pp.1009-1015
• /
• 2011

본 연구에서는 고팽창사이클의 경우 가변밸브시스템을 구성하여 흡기밸브 닫힘시기를 늦추는 방식으로 실현하였고, 저압축에 따른 흡입공기의 감소는 과급압력으로 해결하였다. 이와 같이 디젤기관에 아트킨슨사이클을 실현하여 엔진의 열효율향상 가능성을 알아보았다. 그 결과 흡기밸브 닫힘시기 ABDC $40^{\circ}$ 부터 ABDC $80^{\circ}$ 까지 전 영역에 걸쳐 열효율 및 출력의 향상이 있었다. 다만, 흡기밸브 닫힘시기가 ABDC $70^{\circ}$이후로는 열효율 증가 폭이 둔화되는 경향을 보였다. 위와 같은 연구결과 저속 디젤-아트킨슨사이클화의 최적 연소조건은 흡기밸브 닫힘시기가 ABDC $70^{\circ}$전후로 보이며, 고부하영역이 저부하영역보다 더 효과적으로 나타났고, 중부하영역에서 기관운전은 안정적이었다. 이때 정미열효율은 통상의 디젤기관보다 평균 약 12.5% 높게 나타났다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권8호
• /
• pp.1100-1106
• /
• 2009

최근, 디젤기관의 고효율달성을 위한 방법으로 밀러방식의 고팽창사이클에 대한 연구가 관심이 높다. 본 연구에서는 고팽창 디젤사이클을 구성하여 열역학적으로 해석하고, 몇몇 인자에 의한 사이클 특성을 분석하였다. 이론해석 결과 흡기밸브 닫힘시기가 지각될수록 유효압축비의 감소로 상대적인 팽창비의 효과는 커져 팽창-압축비의 비는 기대할 수 있었으나, 압축압력 및 흡입공기의 역류로 인해 평균유효 압력과 출력의 감고를 수반하였다. 따라서 이에 대한 대책이 있어야 진정한 의미의 고팽창 디젤사이클이 실현되고 열효율향상 가능성이 있음이 확인되었다. 위와 같은 사이클을 실제기관으로부터 구현하기 위해 흡기밸브 닫힘시기를 늦게 하는 제어시스템을 구축하고, 시험을 위해서 S/B가 약 3인 저속 단기통 디젤기관에 가변밸브타이밍(VVT)시스템을 적용하여 성능을 평가하였다. 그 결과 시험기관의 밸브제어에는 큰 문제없는 것으로 평가되었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1643-1647
• /
• 2000

The intake noise of an automobile induced by firing of an engine accompanies acoustic resonances of ducts of an intake system. Conventionally, the adoption of the Helmholtz type resonator was one of possible ways to eliminate the booming noise due to acoustic resonances of air ducts. Although the Helmholtz type resonator is convenient to attenuate the intake noise of an automobile, the usage of the Helmholtz type resonator requires cost increase or big engine room space. Therefore, reduction of the number of the resonators or the volume of the resonators is essential to increase the value of an automobile. To meet these requirements, other types of resonator are suggested instead of the Helmholtz type resonator. The effectiveness of the suggested resonators is compared considering noise reduction ability, effect to the engine performance and size of each resonator.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.78-83
• /
• 2003

General algorithm is developed for the prediction of internal flow-induced noise. This algorithm is based on the integral formula derived by using the General Green Function, Lighthills acoustic analogy and Curls extension of Lighthills. Novel approach of this algorithm is that the integral formula is so arranged as to predict frequency-domain acoustic signal at any location in a duct by using unsteady flow data in space and time, which can be provided by the Computational Fluid Dynamics Techniques. This semi-analytic model is applied to the prediction of internal aerodynamic noise from a throttle valve in an automotive engine. The predicted noise levels from the throttle valve are compared with actual measurements. This illustrative computation shows that the current method permits generalized predictions of flow noise generated by bluff bodies and turbulence in flow ducts.

• 한국자동차공학회논문집
• /
• 제5권3호
• /
• pp.47-53
• /
• 1997

The importance of intake system can not be overstressed in the recent heavy duty commercial vehicle design. The basic requirements of intake system are to have less flow resistance and better air cleaning performance which have direct effects on the performance and service life of engine. In order to improve the performance of engine intake system, the flow phenomena in the intake system should be fully understood. With readily availble CFD code, the numerical analysis becomes the more reliable tools for flow optimization in recent design work. In this research, flow field in the intake system was analyzed by STAR-CD, the 3-D computational fluid dynamics code. Especially, the flow inside of air cleaner was thoroughly analyzed. Pressure distribution and velocity profile in the air cleaner and intake duct was obtained. Having the dust seperated from incoming air at the expense of less pressure drop is the ultimate goal for the research.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 춘계학술대회 논문집
• /
• pp.538-539
• /
• 2010