• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.33-40
• /
• 2008

Normally, cedar heartwood has a red color. However, it frequently changes black color (blackening phenomenon). It is reported that blackening phenomenon of cedar has been caused by oxidation of phenolics and norlignan extractives under weak alkaline conditions. In this study, heat treatment and UV irradiation were carried out to reduce the difference of color value between blackened wood and bright sap wood. Effects of temperature, moisture content, treatment time and light on decrease of color difference between blackened heartwood and sapwood were evaluated in each treatment. A decrement of different color value between blackened heartwood and bright sapwood by hot-water treatment was bigger than others. An effect of the vacuum drying was similar to that of the kiln drying. UV irradiation decreases the color difference between dried blackened heartwood and bright sapwood. It is suggested that UV irradiation could be used as final treatment to reduce the color difference on wood during drying process. Determination of optimum conditions and development of hybrid process for control of discoloration will be needed in a further study.

• Journal of Conservation Science
• /
• v.34 no.3
• /
• pp.211-225
• /
• 2018

The Stupa of the State Preceptor Jigwang from the Beopcheonsaji temple site in Wonju (National Treasure No. 101) was built in the Goryeo Period (around the 11th century), with very excellent style and techniques. It was returned to the Korea after being taken to Osaka of Japan without notice in 1912, and was severely damaged during the Korean War. Subsequently, the Stupa was restored using restoration materials like mortar, and relocated to the National Palace Museum of Korea. Surface contaminants in the Stupa primarily existed around the restoration materials. Black discoloration, which indicates a high discoloration grade, signified a high possession rate in the north and inner regions of the Stupa, which may be related to the relative moisture maintenance time. Most surface contaminants were calcite and gypsum; the black discoloration area underwent secondary discoloration due to air pollution. Moreover, the stone properties exhibited a relatively low discoloration grade, exhibiting crystallized contaminants that partly covered the rock-forming minerals. Overall, the Stupa deteriorated due to discoloration and being covered by lime materials, which were dissolved as the mortar degraded. Hence, it required contaminants removal, surface cleaning and desalination during conservation treatment, in order to control the rate of physicochemical deterioration by contaminants.

• The Journal of the Petrological Society of Korea
• /
• v.12 no.4
• /
• pp.196-206
• /
• 2003

The geochemical and mineralogical investigation on the rocks and repair material comprising of the Sungryemun (The 1st National Treasure) has been made. Rock of the Sungryemun is highly weathered coarse-grained calc-alkali granite. The rock consists mainly of quartz, perthite, plagioclase and biotite with small amounts of orthoclase, muscovite, chlorite and sericite, which are major weathering products from perthite. For obtaining informations about degree of weathering, mineral composition of the original rock calculated by CIPW norm and weathered rock composition determined by XRD quantitative analysis were plotted on a ternary diagram of quartz-potash feldspar-plagioclase. Original rock compositions are plotted on the central granite area. whereas weathered ones are plotted on the granite area close to quartz. The result means that quartz is more abundant in weathered rock, due to selective chemical weathering of potash feldspar and plagioclase over quartz. On the whole, surface of the rocks were black-coated, exfoliated and highly fractured due to the physical and chemical weathering and heavy load has made the cracks in the lower parts of the stone construction. Also, cement and nails, which was used as repair material, during the repair work in the early 1960's, has accelerated the weathering process. Furthermore, weathered conditions of repair materials are very severe. Therefore, it is very urgent to establish of the conservation plan for the Sungryemun.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.1
• /
• pp.108-115
• /
• 2012

Archaeological waterlogged woods found under the sea, in lakes, or in swamp environments are generally weak and fragile. If waterlogged wood materials were taken out of the water and left without modification, they would collapse and lose their original dimensions completely. Conservation is performed to replace the water with chemical agents and to give dimensional stabilization and durability. EDTA and PEG are the most commonly used in the preservation of wood. pH control-precipitation method is used for recovery of EDTA from waste fluid of archeological waterlogged wood conservation treatment. The black substance is eliminated from wood as Fe-EDTA complex are formed and EDTA is separated and precipitated from Fe-EDTA complexes at pH 2.68 or less. The result of analysis of the precipitated products and the commercial EDTA by FT-IR and FE-SEM showed that precipitated product by pH adjusted was not a type of Fe-EDTA complex, but pure EDTA. Waste fluid produced in PEG treatment shows the black color and has an offensive odor by organic matter extracted from wood. Color of waste fluid is decolored with oxidation reaction by peroxy hydrate. In FT-IR and SEM-EDX of PEG after freeze-drying process, no significant change of functional groups induced from oxidation is observed, and any metal ion does not exist in the solid PEG specimen. The molecular weight of PEG is measured using GPC and viscometry. Properties of PEG before and after preservation treatment, and after oxidation with $H_2O_2$ were not changed. Consequently, the peroxidation with $H_2O_2$ is a reasonable and simple method to decolor the used PEG solution.

• Journal of Conservation Science
• /
• v.28 no.4
• /
• pp.329-341
• /
• 2012

Magai Wareiishi Jizo (Buddhist statue carved on rock surface) is close to shoreline and a part of rock block is periodically immersed by seawater. Rock material of the Wareiishi-jizo statue is composed mainly of medium or coarse-grained biotite granite and very durable. However, physical properties of the rock have been changed according to the complex interactions of the salt solution and surrounding environment. Exfoliation of the rock surface is a serious condition by salt crystallization. Exfoliation (14.6%) is concentrated on the upper part of the rock block with mainly boundary of seawater as the center. On the other hand, lower part of the rock block show black layers by contaminants deposition. In addition, brown discoloration and biological contaminants is overlapped. Rock surface show high discoloration rate of 50.5% (black discoloration, 29.2% > yellow discoloration, 14.1% > brown discoloration, 4.4% > green discoloration, 2.9%). Upper part of the rock block had a lot of change in the physical properties than lower part that is immersed by seawater. In particular, surface properties of the rock block was very weak state at the boundary surface of seawater permeation.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.1
• /
• pp.188-207
• /
• 2013

This study looks at the costumes for the crown prince based on the Hyomyeong of 1817, a collection of the National Research Institute of Cultural Heritage. The picture of School Entrance Ceremony of the Crown Prince (王世子入學圖) does not have the crown prince in the scene. However, it can be verified through literature that there are three different costumes for the ceremony. Chulgungui(出宮儀), the ceremony's first procedure, describes the departure of the prince crown from his residence toward Sungkyunkwan (成均館) with his escorting officials. The Crown Prince wears Seoyeonbok (書筵服) during this event. When the Crown Prince arrives at Sungkyunkwan, he participates in a series of ceremonies that consist of Jackhunui (酌獻儀), Wangbokui (往復儀), Supeiui (脩弊儀), and Ipackui (入學儀). At that time, he wears a confucian scholar's uniform. After returning from Sungkyunkwan, he attends Suhaui (受賀儀), the final procedure of the Crown Prince's School Entrance, at Simindang (詩敏堂) of Changgyong Palace(昌慶宮), At this time, the price crown wears Wonyukwanbok (遠遊冠服) as he is congratulated by royal family members and high ranking officials for his entrance to Sungkyunkwan in this ceremony. This point hereby concludes this study on the historical costumes for the prince crown based on the Hyomyeong Crown Prince's School Entrance in 1817.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.3
• /
• pp.92-111
• /
• 2011

This study focus on the restoration stone selection of break-out part based on material characteristics analysis and the conservational safety diagnosis using various nondestructive techniques for Jungdong and Banjukdong Stone Auariums. As a result, the original rocks of the stone aquariums body are porphyritic granodiorite with magnetite-series having igneous lineation, microcline phenocryst, veinlet and basic xenolith. As a result of the provenance presumption of the host rock, a rock around Gamgokri area in Nonsan City was identified the genetically same rock. Therefore, the rock is appropriate for restoration materials of the break-out part. The deterioration assessment showed that the stone aquariums were highly serious scaling, scale off and blackening. Particularly, the front face of Banjukdong stone aquarium needs reinforcement of structural crack (760mm) caused from igneous lineation of biotite. Blackening contaminants on the stone aquariums surface occurred by combining iron oxide, manganese oxide and clay mineral. Also, major factors of efflorescence contaminants were identified as calcite (Jungdong stone aquariums) and gypsum (Banjukdong stone aquariums). The physical characteristics of stone aquariums appeared that the original and new stone is third (moderately weathered) and second grade (slightly weathered), respectively. This study sets up an integrated conservation system from material analysis to restoration stone selection and conservational safety diagnosis of Jungdong and Banjukdong stone aquariums.

• The Journal of the Korea Contents Association
• /
• v.14 no.11
• /
• pp.964-971
• /
• 2014

It is impossible to use general latent fingerprint developing reagents with thermal paper because it is very sensitive to change its color when exposed to heat and polarized solvents. The present study set up the applicapable ratio of 1,2-Indanedione solution demonstrating the effect of zinc chloride. There is no difference in results and the term of validity in solution containing under 3% of polarized solvent. And the solution without zinc chloride has better result in fluorescence.

• Electrical & Electronic Materials
• /
• v.7 no.2
• /
• pp.100-106
• /
• 1994

A bilayer film consisting of a layer of a-Se$_{75}$ Ge$_{25}$ with a surface layer of silver -100[.angs.] thick and a monolayer film of a-Se$_{75}$ Ge$_{25}$ are irradiated with 9[keV] Ga$^{+}$ ion beam. The Ga$^{+}$ ion (10$^{16}$ [ions/cm$^{2}$] exposed a-Se$_{75}$ Ge$_{25}$ and Ag/a-Se$_{75}$ Ge$_{25}$ thin films show an increase in optical absorption, and the absorption edge on irradiation with shifts toward longer wavelength. The shift toward longer wavelength called a "darkening effect" is observed also in film exposure to optical radiation(4.5*10$^{20}$ [photons/cm$^{2}$]). The 0.3[eV] edge shift for ion irradiation films is about twice to that obtained on irradiation with photons. These large changes are primarily due to structural changes, which lead to high etch selectivity and high sensitivity.

• The Journal of Korean Society for Radiation Therapy
• /
• v.7 no.1
• /
• pp.45-53
• /
• 1995

목적 : 뇌정위 방사선수술은 AVM(ateriovenous malformation)이나 작은 크기의 종양에 1회에 고선량의 방사선을 조사하는 기술이다. 선형가속기를 이용한 방사선 수술을 하기 위하여 최근 본원에 설치한 Philips SL 75-5 선형가속기와 isocentric sub system(ISS)에 의한 뇌정위 방사선 수술에 있어서 표적의 위치선정과, gantry와 couch의 회전시 기하학적 오차가 중요시 되는데 isocentric sub system의 오차를 분석 하였다. 대상 및 방법 : 방사선원으로는 Philips SL 75-5 선형가속기의 5MV 광자선을 사용하였고, 원형의 작은 광자선속을 위하여 isocenter에서의 직경이 26mm인 secondary cone을 gimbal baaring에 삽입하여 사용하였다. 표적의 크기와 좌표를 정하기 위하여 CT나 angio localizer를 이용하고, 표적좌표 선정을 위하여 BRW phantom base와 target pointer를 이용하여 임의의 BRW-coordinator를 바꾸어 가면서 gantry angle와 ISS head 각도를 임의로 바꾸어 가면서 film에 방사선을 조사하였다. 흑화된 film을 view box 위에 놓고 광학판독기구로 film 가장자리의 오차를 scale 확대경으로 측정하여 오차를 분석하였다. 결과 : 표적좌표 선정의 정확도를 확인하기 위하여 임의의 표적좌표에 gantry의 10개각도 ISShead의 10개각도에서 각각 광자선을 조사시켜 film을 이용하여 오차를 측정한 결과 collimator cone의 직경이 26mm일때 전체 평균오차가 0.219+-0.03mm이었다. 결론 : Isocentric sub system은 gantry head와 ISS arm 사이에 gimbal bearing이 있어서 이 부위를 flexible하게 연결함으로 gantry의 회전에 무관하게 정확한 isocenter를 유지시켜 주고 ISS head는 couch와 독립되어 움직이므로 isocentric sub system isocenter의 오차를 최대한 줄일수 있음을 알았다.