• The Journal of Engineering Geology
• /
• v.26 no.2
• /
• pp.251-260
• /
• 2016

Groundwater flow due to hydraulic gradients across a geologic barrier surrounding a dam reservoir can cause swamps or wetlands to form on the downstream side of the dam, thereby restricting land use. The difference in head between the reservoir level and the downstream groundwater level creates a hydraulic gradient, allowing water to flow through the geologic barrier. We constructed a drainage system at the Daecheong dam to study the effects on groundwater levels and soil moisture contents. The drainage system consisted of a buried screened pipe spanning a depth of 1-1.5 m below a land surface. Groundwater levels were monitored at several monitoring wells before and after the drainage system was installed. Most well sites recorded a decline in groundwater level on the order of 1 m. The high-elevated site (monitoring well W1) close to the reservoir showed a significant decline in groundwater level of more than 2 m, likely due to rapid discharge by the drainage system. Soil moisture contents were also analyzed and found to have decreased after the installation of the drainage system, even considering standard deviations in the soil moisture contents. We conclude that the drainage system effectively lowered groundwater levels on the downstream side of the dam. Furthermore, we emphasize that water seepage analyses are critical to embankment dam design and construction, especially in areas where downstream land use is of interest.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.10
• /
• pp.17-29
• /
• 2016

A debris flow analysis model has been developed to simulate the erosion and entrainment of soil layer. Special attention is given to the model which represents strength softening behaviour of soil layer due to velocity of deformation. The 3D FE analysis by Coupled Eulerian-Lagrangian (CEL) model is conducted to simulate the debris flow. The model is validated using published data on laboratory experiment (Mangeny et al., 2010). It has been definitely shown that proposed model is in good agreement with the results of laboratory data. Futhermore, the FE analysis is conducted to ensure capability of simulating the real scale debris flow. The result of Ramian watershed, Korea shows that the debris flow has increased the volume and speed and it is in good agreement with field investigation. Based on this, it is confirmed that proposed model shows good agreement of the behavior of the actual and analytical debris flow.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.1
• /
• pp.57-67
• /
• 2020

Recently, smart cities are attracting attention as a solution for a plethora of urban problems, including transportation, environment, safety, and energy. However, despite a substantial body of research dealt with the concept, trends, policy, and legal institutions of smart cities, few researchers have examined how the smart city services influence the cities from the dynamic perspective that considers the entire cycle of a city, including its growth, stagnation, and decline. Thus, it is vital to understand how the city changes with time from the view that a city is a system of sub-elements-population, industry, transportation, environment, housing, and land-closely interacting together. Within this context, this study explores how the urban dynamics of Anyang-city develop for the long term using the System Dynamics method and analyzes the effect of smart city project investment on the dynamics of Anyang-city. According to the result, Anyang-city is a "mature and stable" type, and its population is expected to decrease slowly by 2040. Specifically, the Anyang-city population will be reduced to 553,000 by 2030. It was analyzed that the number will decrease to 543,000 by 2040. It was also found that the investment in smart city projects in Anyang, based on the Plan for Anyang Smart City, would have the following effects: easing population decline, increasing number of businesses, improving urban safety index, and increasing average driving speed. The population will grow by 4,000 and the number of businesses will increase by 761 than before budget investment. The result of this paper is expected to contribute to identifying and predicting the effect of smart city policies from a long-term perspective.

• The Journal of the Korea Contents Association
• /
• v.20 no.3
• /
• pp.200-208
• /
• 2020

The domain of Web design gradually expands with the utilization of the Web and the development of technologies, but there are insufficient related studies. Thus, this study would recognize the importance of the Web design market and present the direction of designs in the future by investigating the process of changes in Web design. This study investigated the background of the revelation and evolution of design expression techniques and the flow of the information technology affecting the design and conducted a study analyzing the process of changes of Web design based on this. It is judged that this study has significance as the baseline research material for the expansion of the Web design domain of the future. As for the scope of the research, based on 30 years of the history of the Web, this study was conducted with materials on Websites, which had become issues from 1990 through the early-2000s and selected the winners of a grand prize in Web Award Korea since the mid-2000s as the subjects of analysis. This study analyzed the formative characteristics of design expression techniques and the characteristics of the information technology that affected Web design. As a result of the research, changes in design expression techniques could be divided broadly into minimalism and skeuomorphism, and it was found that the methods of expressing Web designs changed in various ways, affected by the development of information technology. It is predicted that with the emergence of various devices and the vitalization of video contents, the designs affected by minimalism, which can harmonize with them, will continue in the future.

• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.193-198
• /
• 2004

In general, the function of intake structure, whether it be a open channel, a fully wetted tunnel, a sump or a tank is to supply an evenly distributed flow to a pump station. An even distribution of flow, characterized by strong local flow, can result in formation of surface or submerged vortices, and with certain low values of submergence, my introduce air into pun, causing a reduction of capacity and efficiency, an increase in vibration and additional noise. This study investigated experimentally the formation of the vortex to understand the mechanism of vortex formation and to prevent the formation of vortex in the sump model using by the model test and PIV tool. Sump model was manufactured to 1/8 scale with the drawing of W intake pumping station. from the results of model test and PIV, the vortex were occurred the in the whole section. Thus, sump model tests with the anti-vortex device might be considered to prevent the formation of vortex in the sump model.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.52-52
• /
• 2012

최근 선진국을 중심으로 제조기술의 산업혁명이라고 불릴 정도로 큰 파급효과가 기대되는 자기조립기반의 산업공정기술을 확보하기 위한 많은 노력과 연구들이 활발하게 진행되고 있다. 자기조립(Self-Assembly) 현상은 자연에서 일어나는 자발적인 힘으로 원자 또는 분자 단위까지 구조물을 제어하고 bottom-up 방식(상향식: 원자/분자 스케일의 나노구조를 배열/조립하여 원하는 형태의 패턴을 만들어 내는 방식)으로 원하는 구조물을 설계/제작할 수 있는 능력을 가지고 있다. 기초적인 과학으로부터 출발한 자기조립기술은 최근 자기조립 응용개발에서 많은 성과를 이루어내면서 산업화 가능성을 크게 하고, 과학계와 산업계의 많은 관심을 불러일으키고 있다. 반도체 산업기술을 예측하는 ITRS 로드맵(2005년)에 의하면 directed self-assembly 방법이 새로운 미래 패터닝 기술로 개발되어 2016년경에 사용되고, 자기조립소재로 제작된 다양한 응용소자들은 새로운 미래소자로 개발될 것으로 예상하고 있다. 이에 맞추어 국내 기업들도 diblock copolymer를 이용한 나노패터닝 기술 확보를 위한 연구를 진행하고 있다. 또한 IBM은 자기조립기술을 반도체공정에 실험적으로 적용하여 자기조립기술이 생산 공정에 부분적으로 적용될 가능성이 크다는 것을 보여주었다. 산업계와 함께 학계의 연구센터에서는 산업화를 위한 자기조립 집적화 공정(Integrated process) 개발을 이루기 위하여 체계적으로 연구를 실시하고 있다. 미국의 Northeastern 대학의 CHN(Center for high-rate Nanomanufacturing) 연구센터는 자기조립 집적화에 용이한 새로운 개념의 소자를 제안하고 이를 집적화하기 위한 다양한 공정을 개발하고 있으며, Wisconsin 대학의 NSEC(Nanosacle Science and Engineering Center) 연구센터는 diblock copolymer를 이용한 나노패터닝 기술 개발에서 획기적인 결과를 도출하여 산업계에 적용될 가능성을 높이고 있다. 이와 같은 결과들로부터 앞으로의 자기조립기술에 대한 연구는 3차원 구조물을 제작할 수 있는 집적화 공정에 집중될 것이고, 이를 위하여 새로운 개념의 단순한 구조의 응용소자개발도 함께 추진될 것으로 판단된다. 또한 실용 가능성이 큰 집적화 공정으로 개발하기 위하여 기존의 top-down 방식을 접목한 bottom-up 방식의 자기조립 집적화 공정이 개발될 것으로 예상하고 있다. 이와 함께 자기조립공정은 반복되는 구조를 쉽게 제작할 수 있는 장점을 가지고 있어 다양한 응용소자 [태양전지(solar cell), 연료전지(fuel cell), 유연성 있는 전자기기(flexible electronics), 화면표시 장치(display device)] 제작에 쉽게 이용되어 새로운 산업을 창출할 수 있는 가능성을 보이고 있다. 본 자기조립 연구 센터에서는 이와 같은 자기조립 특성을 제조공정에 적용하여 혁신적인 제조공정기술을 확보하고자 연구를 진행하고 있다. 그러므로 본 발표에서 이와 같은 연구 흐름과 함께 본 센터에서 진행하고 있는 자기조립 제조방법을 소개하고자 한다. 이와 함께 자기조립방법을 이용하여 제작된 다양한 응용소자 개발 결과를 발표하고, 이를 top-down 방식과 접목하여 집적화공정으로 개발하는 전략을 함께 소개하고자 한다.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.2 no.3
• /
• pp.1-11
• /
• 2011

The typical truss-lattice material successively packed by repeated cubic symmetric unit cells consists of sub-elements (SE) proposed in this study. The representative continuum model for this truss-lattice material such as the effective strain and stress relationship can be formulated by the homogenization procedure based on the notation of averaged mechanical properties. The volume fractions of micro-scale struts have a significant influence on the effective strength as well as the relative density in the lattice plate with replicable unit cell structures. Most of the strength contribution in the lattice material is induced by axial stiffness under uniform stretching or compression responses. Therefore, continuum based constitutive models composed of homogenized member stiffness include these mechanical characteristics with respect to strength, internal stress state, material density based on the volume fraction and even failure modes. It can be also recognized that the stress state of micro-scale struts is directly associated with the continuum constitutive model. The plastic flow at the micro-scale stress can extend the envelope of the analytical stress function on the surface of macro-scale stress derived from homogenized constitutive equations. The main focus of this study is to investigate the basic topology of unit cell structures with the cubic symmetric system and to formulate the plastic models to predict pressure dependent macro-scale stress surface functions.

• Journal of Conservation Science
• /
• v.32 no.4
• /
• pp.521-534
• /
• 2016

Ancient tombs are typically comprised of confined rooms, which have different spatial characteristics than the external environment because they are covered by heavy layers of soil. In this study, we examined the thermal energy flow from the outside to inside of Songsan-ri tomb No. 6. External heat flows slowly to the inside because of heavy soil layer, and the presence of several rooms and entrances. For this reason, it takes about two months for the air temperature to travel from the outside to the inside of the tomb. Interestingly, the gradational inflow of thermal energy from outside the tomb leads to delicate horizontal and vertical variations in the wall temperature. These micro-environmental differences occur in the inner tomb every year, so we can expect them to cause condensation with regularity. In addition, we show that the previously installed forced circulation air conditioning system risks fatal damage to the mural wall painting. The results of this research suggest an optimal air conditioning system and optimized space planning to conserve Songsan-ri tomb No. 6 and its mural painting.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.2
• /
• pp.177-183
• /
• 2005

The effluent quality is directly affected by the separation of biological solids in a final clarifier because the majority of discharged $BOD_5$ and SS are virtually dependent on the results of biological solids in the sedimentation tank effluent. If a final clarifier is effectively designed and operated, the desired goal of clarification for wastewater can be achieved together with the cost reduction in the treatment of wastewater. To this end flow characteristics and the removal efficiency of SS are numerically investigated especially by the change of the inlet position and the installation of baffle to improve the performance of a rectangular final clarifier. The 2-D computer program developed in a rectangular coordinates has been successfully validated against experimental residence time distribution(RTD) curves obtained by tracing radio-isotope. The lowering of the inlet position weakens the density current and induces the settling of SS in the front zone of a clarifier. Thus the decreased traveling distance of the sludge increases the removal efficiency of SS in the effluent. The inlet baffle installed in the front region of clarifier prevents the short circuiting flow and induces to flow into the dense underflow, which eventually improves the effluent quality. In the case of lower inlet position, however, installation of baffle results in degradation of effluent quality. Consequently it is strongly recommended that in-depth numerical study be performed in advance for optimizing a clarifier design and retrofitting to improve effluent quality in a final clarifier.

• Journal of Korean Society of Forest Science
• /
• v.85 no.2
• /
• pp.210-224
• /
• 1996

The SLODSVAT consists of interrelated submodels that simulate : the transfer of radiation, water vapour, sensible heat, carbon dioxide and momentum in two canopy layers determined by environmental conditions and ecophysiological properties of the vegetation ; uptake and storage of water in the "root-stem-leaf" system of plants ; interception of rainfall by the canopy layers and infiltration and storage of rain water in the four soil layers. A comparison of the results of modeling experiments and field micro-climatic observations in a spruce forest(Picea abies [L].Karst) in the Soiling hills(Germany) shows, that the SLODSVAT can describe and simulate the short-term(diurnal) as well as the long-term(seasonal) variability of water vapour and sensible heat fluxes adequately to natural processes under different environmental conditions. It proves that it is possible to estimate and predict the transpiration and evapotranspiration rates for spruce forest ecosystems on the patch and landscape scales for one vegetation period, if certain meteorological, botanical and hydrological information for the structure of the atmospheric boundary layer, the canopy and the soil are available.