• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.838-850
• /
• 2015

In this study, dilute acid pretreatment was operated using small-diameter Quercus mongolica for evaluating the yield change of furfural and levulinic acid depending on pretreatment factors. The dilute acid pretreatment was conducted depending on reaction temperature ($140-180^{\circ}C$), reaction time (10-30 min), and sulfuric acid concentration (0-2%, w/w). Then, glucose, XMG (xylose + mannose + galactose), furfural, and levulinic acid contents in the liquid hydrolyzate were measured and analyzed after pretreatment. Glucose content increased to 16.02% as reaction temperature, reaction time, and sulfuric acid concentration increased, but it decreased at the sulfuric acid concentration of 2% (reaction temperature: > $170^{\circ}C$, reaction time: > 20 min). On the other hand, reaction temperature had a strong influenced on XMG content, and XMG content decreased to 1.63% through increasing of reaction temperature and sulfuric acid concentration, but XMG content was less affected by changes of reaction time. Furfural content increased with the increase of reaction temperature, reaction time, and sulfuric acid concentration, and maximum furfural content was 7.61% (reaction temperature: $180^{\circ}C$, reaction time: 20 min, sulfuric acid concentration: 1%) based on a weight of raw material, while furfural content was dropped in more severe condition than in maximum furfural content condition. Levulinic acid content also increased with higher reaction temperature, reaction time, and sulfuric acid concentration. Especially, the sharp increase of levulinic acid content was observed above $170^{\circ}C$, and maximum levulinic acid content was 10.98% (reaction temperature: $180^{\circ}C$, reaction time: 30 min, sulfuric acid concentration: 2%). However, less than 1% of furfural and levulinic acid content was obtained in non-acidic catalyst condition that in whole conditions of reaction temperature and reaction time.

• KSBB Journal
• /
• v.14 no.3
• /
• pp.309-314
• /
• 1999

In order to produce high concentration of sodium gluconate, optimization of the fermentation conditions, such as glucose concentration, inoculum size, dissolved oxygen concentration and glucose feeding method, was examined. When the glucose concentration was maintained in the range of 30∼50 g/L during the batch fermentation, glucose conversion yield and productivity were 92.2% and 6.0 g/L/hr, respectively. In the case of the low concentration below 30 g/L, the yield decreased by about 25%. As the inoculum size increased above 20%(w/v), lag phase was shortened but the productivity decreased. The dissolved oxygen level of 60∼70% was shown to be the threshold point for 75% of increase in the productivity of sodium gluconate. Finally, optimal glucose feeding rate was determined using various feeding methods such as exponential feeding, feeding based on the average glucose consumption rate and was determined using various feeding methods such as exponential feeding, feeding based on the average glucose consumption rate and on the oxygen uptake rate and etc. Our result shows that glucose feeding, based on the oxygen uptake rate is a very simple, efficient and robust method, especially when oxygen is consumed as a substrate for the bioconversion. Using the above glucose feeding strategy under the optimized condition, 255 g/L of sodium gluconate concentration, 12 g/L/hr of productivity and 95% of glucose conversion yield were achieved with A. niger ACM53.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.10 no.3
• /
• pp.117-125
• /
• 2002

This study experimented a possibility of advanced treatment through microorganism that converts $NH_3-N$ to organic nitrogen in wastewater contaminated by ammoniac nitrogen unlike conventional nitrogen removal process. After distributing three kinds of special bacteria that use $NH_3-N$ as a substrate, when those bacteria were cultured in no salt condition and salt condition (3% NaCl), M11 showed better growth in salt condition and M12 showed better growth in no salt condition. However M7l grew well in both no salt condition and salt condition. In the test of glucose effect, maximum growth and removal rate were observed in glucose concentration of 5g/L but in high concentration (1000mg/L as $NH_3-N$) of $NH_3-N$ growth and removal rate were low. Removal rate was the highest in 100mg/L $NH_3-N$ and the fact that concentration of $NO_2-N$ and $NO_3-N$ didn't increase assumed $NH_3-N$ was converted to organic nitrogen. Optimum concentration of $K_2HPO_4$ for phosphorous supply and buffer was 5g/L. Special bacteria distributed could use $NO_2-N$ and $NO_3-N$ as well as $NH_3-N$ as substrates. This study showed that when growth rate of bacteria was high removal rate also was high. It is possible to apply as a method to treat wastewater polluted by $NH_3-N$.

• Journal of Korean Society of Forest Science
• /
• v.84 no.1
• /
• pp.103-113
• /
• 1995

To estimate buffer capacity and sensitivity of forest ecosystem to acid rain in Taejon, ionic components of throughfall, stemflow, soil leachate, and open rain in Pinus rigida and Quercus variabilis forest were analysed. The spatial sensitivity based on parent rock and forest type was given by IDRISI of GIS which created imagery conversion from soil and vegetation map. Parent rocks and soils were classified into acidic, sedimentary, metamorphic rock and then subdivided based on $SiO_2$ content. Average pH of vegetation leachate was higher in throughfall but lower in stemflow than open rain and higher in Quercus variabilis forest than in Pinus rigida forest. The flow of $SO{_4}^{2-}$, $NO_3{^-}$ and $Cl^-$ through vegetation leaching(throughfall plus stemflow) into soil were 7.2, 4.3, and 2.5 times, respectively, higher in Pinus rigida forest and 4.4, 2, and 2.5 times, respectively, higher in Quercus variabilis forest than in open field. But the concentration of exchangeable cations was 4.1 times higher in Pinus rigida forest and 4.6 times higher in Quercus variabilis forest than in open field. Average pH of soil leachate was lower than that of throughfall, but higher than that of stemflow. The concentration of exchangeable canons and $Al^{3+}$ in soil leachate were more in Pinus rigida forest than in Quercus variabilis forest and increase signficantly with the increase of acidic deposits. Pinus forest had more deposition and canopy interception of acidic pollutants and more nutrient loss than Quercus forest, and Quercus forest had more cation exchange and proton consumption and than consequently had less nutrient loss and better buffer capacity than Pinus forest. The 69% of forest soils was distributed on acidic rock, 25% of it on metamorphic rock, and 6% of it on intermediate and basic rock. Acidic rock residuals which had low very canon exchange capacity and high sensitivity to acid rain occupied a half of total forest land in Taejon area. Therefore forests in Taejon showed high vulnerability to acid rain and will receive much more stress with the increase of acid rain precursors.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.12 no.1
• /
• pp.42-62
• /
• 2008

Objectives: It is well known that some parameters of the photoplethysmogram (PPG) acquired by time domain contour analysis can be used as markers of vascular aging. But the previous studies that have been performed for frequency domain analysis of the PPG to date have provided only restrictive and fragmentary information. The aim of the present investigation was to determine whether the harmonics extracted from the PPG using a fast Fourier transformation could be used as an index of vascular aging. Methods: The PPG was measured in 600 recruited subjects for 30 second durations, To grasp the gross age-related change of the PPG waveform, we grouped subjects according to gender and age and averaged the PPG signal of one pulse cycle. To calculate the conventional indices of vascular aging, we selected the 5-6 cycles of pulse that the baseline was relatively stable and then acquired the coordinates of the inflection points. For the frequency domain analysis we performed a power spectral analysis on the PPG signals for 30 seconds using a fast Fourier transformation and dissociated the harmonic components from the PPG signals. Results: A final number of 390 subjects (174 males and 216 females) were included in the statistical analysis. The normalized power of the harmonics decreased with age and on a logarithmic scale reduction of the normalized power in the third (r=-0.492, P<0.0001), fourth (r=-0.621, P<0.0001) and fifth harmonic (r=-0.487, P<0.0001) was prominent. From a multiple linear regression analysis, Stiffness index, reflection index and corrected up-stroke time influenced the normalized power of the harmonics on a logarithmic scale. Conclusions: The normalized harmonic power decreased with age in healthy subjects and may be less error prone due to the essential attributes of frequency domain analysis. Therefore, we expect that the normalized harmonic power density can be useful as a vascular aging marker.

• Journal of KIISE:Computing Practices and Letters
• /
• v.6 no.2
• /
• pp.135-149
• /
• 2000

Most of prior works on testing parallel programs have concentrated on how to guarantee the reproducibility by employing event traces exercised during executions of a program. Consequently, little work has been done to generate test cases, especially, from specifications produced from software development process. In this research work, we devise the techniques for deriving test cases automatically from the specifications written in Message Sequence Charts(MSCs) which are widely used in telecommunication areas and develop the testing environment for performing module testing of parallel programs with derived test cases. For deriving test cases from MSCs, we have to uncover the causality relations among events embedded implicitly in MSCs. For this, we devise the methods for adapting vector time stamping to MSCs, Then, valid event sequences, satisfying the causality relations, are generated and these are used as test cases. The generated test cases, written in TTCN, are translated into CHILL source codes, which interact with a target module to be tested and test the validity of behaviors of the module. Since the testing method developed in this research work extracts test cases from the MSC specifications produced front telecommunications software development process, it is not necessary to describe auxiliary specifications for testing. In audition adapting vector time stamping generates automatically the event sequences, the generated event sequences that are ones for whole system can be used for individual testing purpose.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.4
• /
• pp.247-256
• /
• 2013

In this study, alginate beads containing birnessite (Bir-AB), a highly reactive oxidative catalyst for the transformation of phenolic compounds, was prepared and its 1-naphthol (1-NP) removal efficiency was investigated in a batch test. Based on scanning electron microscopy image, it can be inferred that the alginate gel cluster acts as a bridge which bind the birnessite particles together. Kinetic experiment with Bir-AB of different mixing ratios of birnessite to alginate (Bir : AG=0.25 : 1~1 : 1 w/w) indicate that pseudo-first order kinetic constants, $k(hr^{-1})$ for the 1-NP removals increased about 1.5 times when the birnessite mixing ratio was doubled. The removals of 1-NP was found to be dependent on solution pH and the pesudo-first order rate constants were increased from 0.331 $hr^{-1}$ at pH 10 to 0.661 $hr^{-1}$ at pH 4. The analysis of total organic carbon for the reaction solutions showed that a higher removal of dissolved organic carbon was achieved with Bir-AB as compared to birnessite. HPLC chromatographic analysis of the methanol extract after reaction of 1-NP with Bir-AB suggest that the reaction products could be removed through incorporation into the aliginate beads as a bound residue. Mn ions produced from the oxidative transformation of 1-NP by birnessite were also removed by sorption to Bir-AB. The Bir-AB was recovered quantitatively by simple filtration and was reused twice without significant loss of the initial reactivity.

• The Korean Journal of Nuclear Medicine
• /
• v.32 no.4
• /
• pp.365-373
• /
• 1998

Purpose: The conventional gamma camera is not ideal for scintimammography because of its large detector size (${\sim}500mm$ in width) causing high cost and low image quality. We are developing a small gamma camera dedicated for breast imaging. Materials and Methods: The small gamma camera system consists of a NaI (T1) crystal ($60 mm{\times}60 mm{\times}6 mm$) coupled with a Hamamatsu R3941 Position Sensitive Photomultiplier Tube (PSPMT), a resister chain circuit, preamplifiers, nuclear instrument modules, an analog to digital converter and a personal computer for control and display. The PSPMT was read out using a standard resistive charge division which multiplexes the 34 cross wire anode channels into 4 signals ($X^+,\;X^-,\;Y^+,\;Y^-$). Those signals were individually amplified by four preamplifiers and then, shaped and amplified by amplifiers. The signals were discriminated ana digitized via triggering signal and used to localize the position of an event by applying the Anger logic. Results: The intrinsic sensitivity of the system was approximately 8,000 counts/sec/${\mu}Ci$. High quality flood and hole mask images were obtained. Breast phantom containing $2{\sim}7 mm$ diameter spheres was successfully imaged with a parallel hole collimator The image displayed accurate size and activity distribution over the imaging field of view Conclusion: We have succesfully developed a small gamma camera using NaI(T1)-PSPMT and nuclear Instrument modules. The small gamma camera developed in this study might improve the diagnostic accuracy of scintimammography by optimally imaging the breast.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.5-9
• /
• 2004

In this paper, we studied the OCT(Optical Coherence Tomography) system which it has been extensively studied because of having some advantages such as high resolution cross-sectional images, low cost, and small size configuration. A basic principle of OCT system is Michelson interferometer. The characteristics of light source determine the resolution and the transmission depth. As a results, the light source have a commercial SLD with a central wavelength of 1,285 nm and FWHM(Full Width at Half Maximum) of 35.3 nm. The optical delay line part is necessary to equal of the optical path length with scattered light or reflected light from sample. In order to equal the optical path length, the stage which is attached to reference mirror is moved linearly by step motor And the interferometer is configured with the Michelson interferometer using single mod fiber, the scanner can be focused of the sample by using the reference arm. Also, the 2-dimensional cross-sectional images were measured with scanning the transverse direction of the sample by using step motor. After detecting the internal signal of lateral direction at a paint of sample, scanner is moved to obtain the cross-sectional image of 2-demensional by using step motor. Photodiode has been used which has high detection sensitivity, excellent noise characteristic, and dynamic range from 800 nm to 1,700 nm. It is detected mixed small signal between noise and interference signal with high frequency After filtering and amplifying this signal, only envelope curve of interference signal is detected. And then, cross-sectional image is shown through converting this signal into digitalized signal using A／D converter. The resolution of the OCT system is about 30$\mu\textrm{m}$ which corresponds to the theoretical resolution. Also, the cross-sectional image of ping-pong ball is measured. The OCT system is configured with Michelson interferometer which has a low contrast because of reducing the power of feedback interference light. Such a problem is overcomed by using the improved inteferometer. Also, in order to obtain the cross-sectional image within a short time, it is necessary to reduce the measurement time for improving the optical delay line.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.21 no.4
• /
• pp.317-326
• /
• 2019

Salinity which is often detected on reclaimed land is a major detrimental factor to crop growth. It would be advantageous to develop an approach for assessment of salinity and drought damages using a non-destructive method in a large landfills area. The objective of this study was to examine applicability of the decision tree classifier using imagery for classifying for spring potatoes (Solanum tuberosum) damaged by salinity or drought at vegetation growth stages. We focused on comparing the accuracies of OA (Overall accuracy) and KC (Kappa coefficient) between the simple reflectance and the band ratios minimizing the effect on the light unevenness. Spectral merging based on the commercial band width with full width at half maximum (FWHM) such as 10 nm, 25 nm, and 50 nm was also considered to invent the multispectral image sensor. In the case of the classification based on original simple reflectance with 5 nm of FWHM, the selected bands ranged from 3-13 bands with the accuracy of less than 66.7% of OA and 40.8% of KC in all FWHMs. The maximum values of OA and KC values were 78.7% and 57.7%, respectively, with 10 nm of FWHM to classify salinity and drought damages of spring potato. When the classifier was built based on the band ratios, the accuracy was more than 95% of OA and KC regardless of growth stages and FWHMs. If the multispectral image sensor is made with the six bands (the ratios of three bands) with 10 nm of FWHM, it is possible to classify the damaged spring potato by salinity or drought using the reflectance of images with 91.3% of OA and 85.0% of KC.