• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.11a
• /
• pp.192-195
• /
• 2010

영상 정보의 정확성을 필요로 하는 다양한 서비스 및 여러 학문 분야의 적용성으로 인해 물리적인 한계성을 극복할 수 있는 고해상도 영상처리 기법의 요구가 대두되고 있다 뿐만 아니라, 인터넷 상의 디지털 콘텐츠 중의 하나인 동영상 UCC의 제작환경이 보편화됨으로써 비전문적인 제작으로 인한 다양한 형태의 해상도 저하 및 영상의 왜곡 현상이 발생하여 고품질의 영상을 추구하는 사용자들의 요구를 충족시키지 못하고 있다. 이러한 문제점을 해결하기 위한 압축 동영상의 개선 된 영상 정보를 획득하기 위한 연구가 이루어지고 있지만 다음과 같은 문제점이 있다. 기존의 방법은 일반적으로 저역 통과 필터 기법과 정규화 영상 복원 방식으로 구분되어 연구되고 있으며, 저역 통과 기법은 계산량 측면에서 장점이 있으나, 영상과 양자화 정도에 따라 적응적이지 못한 단점이 있다. 또한 정규화 복원 방식은 압축 영상의 시각적으로 불편한 현상의 완화 정도를 결정하는 정규화 매개변수를 일괄적으로 모든 화소에 적용해, 화소의 위치에 대한 적응도가 낮고 정규화 매개 변수 선택 시 원 영상에 대한 정보를 알고 있다는 가정을 사용했으므로 실제 사용이 불가능하며, 영상들 사이의 불균일로 인해 적응적으로 처리하지 못하는 단점이 있다. 본 연구에서는 이러한 문제점을 극복할 수 있도록 압축 정보 활용을 통한 POCS 방식을 사용한 coding artifact 제거 방식에 대해 기술한다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.4
• /
• pp.23-29
• /
• 2002

Radar method can be effective in probing concrete structures damaged by earthquake. Data analysis is usually performed in time domain, by considering time delay of the wave due to the dielectric constant of concrete. In this study, improved data analysis has been performed using signal processing scheme of spectra analysis and filtering. Three antenna with 900MHz, 1㎓, and 1.5㎓ center frequency were used to detect a steel bar or delamination in specimens for obtaining data, Frequency spectrum was filtered in low pass, high pass, and band pass varying cutoff frequency with 1/3 octave in frequency domain. The most effective cutoff frequency for each frequency has been determined as the range for 2 octave lower to 1 octave higher and 2 octave lower to 1 octave lower. This result provided a basis in improving data analysis capability using frequency domain filtering.

• Applied Chemistry for Engineering
• /
• v.30 no.5
• /
• pp.633-638
• /
• 2019

Indoor air quality underground facilities are not equipped for the removal of volatile organic compounds (VOCs) and they are usually treated by diffusion methods such as ventilation. In this study, an adsorption filter was prepared using various coating methods such as carbon nano fiber (CNF) and dip coating. As a result, the adsorption performance was improved by 2 to 20 times or more compared to that of using the metal foam support. This is maybe due to the enhancement of pore distribution which was confirmed by SEM. In addition, the adsorption performance was 13.95 mg/g by adding lignin, and also an average adsorption performance of 13.25 mg/g was maintained after washing indicating that a highly durable adsorption filter material was prepared. It can be suggested that the developed adsorption filter material can be a potential solution that can fundamentally control VOCs, not via the concentration reduction of mechanical ventilation in underground facilities.

• Clean Technology
• /
• v.7 no.1
• /
• pp.65-74
• /
• 2001

Modified dip-coating method 8.3 times shorten in solution volume-coated and 83.3 times in coating time than existing dip-coating method. Coating weight increased nearly 2~3 times. So modified dip-coating method is evaluated that it is economic and has a efficiency. When we make an experiment in coated $LaCoO_3$ on ceramic monolith in modified dip-coating method which use 2 coating applications with relative viscosity $0.006202kg{\cdot}m/sec$, it showed a superior reaction at 88.56mg per ceramic unit gram in NO-CO reaction(optimum coating amount). When we make an experiment in the same size of ceramic filter cell with different conditions 100, 200cell per square inch, the result in low temperature($200^{\circ}C{\sim}350^{\circ}C$), 200cell3 per square inch is 6~23% higher in NO reduction and 11% in CO oxidation than 100cell per square inch. It is because the more the number of cells in the ceramic filter increase, the more catalytic surface area is expanded.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.167-172
• /
• 2000

This paper is aimed at developing an location tracking for mobile station employing currently available mobile communication network of cellular phone and PCS(Personal Communication System). When the location tracking of mobile stations is in services, the services such as Emergency-119, crime investigation, effective urban traffic management or the safety protection of Alzheimer's patients, ran be available. This paper is to track the mobile station in communication network in NLOS environment. To achieve reduction of the standard noise, Kalman filter is used. In terms of the distance, positions are located by using TOA and TDOA methods in the environment that removes NLOS bias in the measured data. And then smoothing method is used. to achieve reduction of the position error values

• Progress in Medical Physics
• /
• v.16 no.3
• /
• pp.138-147
• /
• 2005

The Monte Carlo method cannot have been used for routine treatment planning because of heavy time consumption for the acceptable accuracy. Since calculation time is proportional to particle histories, we can save time by decreasing the number of histories. However, a small number of histories can cause serious uncertainties. In this study, we proposed Monte Carlo dose computation time and uncertainty reduction method using specially designed filters and adaptive denoising process. Proposed algorithm was applied to 6 MV photon and 21 MeV electron dose calculations in homogeneous and heterogeneous phantoms. Filtering time was negligible comparing to Monte Carlo simulation time. The accuracy was improved dramatically in all situations and the simulation of 1 $\%$ to 10$\%$ number of histories of benchmark in photon and electron dose calculation showed the most beneficial result. The empirical reduction of necessary histories was about a factor of ten to fifty from the result.

• Journal of Digital Contents Society
• /
• v.16 no.5
• /
• pp.815-822
• /
• 2015

By the growing of SMS phishing victims, applications for processing spam messages are being released in succession. However most spam messages that cleverly modified the content like separating the consonants and vowels are fail to be filtered. In this paper, we implemented an application 'AntiSpam' which is able to identify spam strings in the text message to solve this problem. 'AntiSpam' searches spam strings in the text message by using set-based POI search algorithm, and then calculate the possibility of whether it is spam or not in accordance with the search results. In addition, it catches skillfully disguised spam messages in order to avoid missing the spam filtering. Users, who received a message, can check the result in spam message possibility decision result and the contents of the message and they can choose how to handling the message.

• Journal of the Institute of Convergence Signal Processing
• /
• v.19 no.4
• /
• pp.192-198
• /
• 2018

Recently, the use of drone has been increasing rapidly in many ways. A drone can capture remote objects efficiently so it is suitable for surveillance and security systems. This paper discusses three methods for detecting moving vehicles using a drone. We compare three target detection methods using a background frame, preceding frames, or moving average frames. They are subtracted from a current frame. After the frame subtraction, morphological filters are applied to increase the detection rate and reduce the false alarm rate. In addition, the false alarm region is removed based on the true size of targets. In the experiments, three moving vehicles were captured by a drone, and the detection rate and the false alarm rate were obtained by three different methods and the results are compared.

• Journal of the Institute of Convergence Signal Processing
• /
• v.21 no.4
• /
• pp.209-215
• /
• 2020

In this paper, we propose an algorithm for segmenting weld bead images using edge enhancement and active contours. In the proposed method, high-frequency filtering and contrast improvement are performed for edge enhancement, and then, by applying the active contour method, only the weld bead region can be obtained. The proposed algorithm detects an edge through high-frequency filtering and reinforces the detected edge by using contrast enhancement. After the edge information is improved in this way, the weld bead area can be extracted by applying the active contour method. The proposed algorithm shows better performance than the existing methods for segmenting the weld bead in the image. For the objective reliability of the proposed algorithm, it was compared with the existing high pass filtering methods, and it was confirmed that the welding bead segmentation of the proposed method is excellent. The proposed method can be usefully used in evaluating the quality of the weld bead through an additional procedure for the segmented weld bead.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.115-117
• /
• 2021

Currently, as IoT technology develops, monitoring systems are being used in various fields, and image processing is being used in various forms. Image data causes noise due to various causes during the transmission and reception process, and if it is not removed, loss of image information or error propagation occurs. Therefore, denoising images is essential. Typical methods of eliminating Salt and Pepper noise in images include AF, MF, and A-TMF. However, existing methods have the disadvantage of being somewhat inadequate in high-density noise. Therefore, in this paper, we propose an algorithm for determining noise for Salt and Pepper denoising and replacing the central pixel with an original pixel if it is non-noise, and processing the filtering mask by segmenting and averaging it in eight directions. We evaluate the performance by comparing and analyzing the proposed algorithms with existing methods.